Microsoft 70-686 Online Practice Questions and Exam Preparation

Microsoft 70-686 Online Questions & Answers

• Question 61:

  You have deployed a ConfigMgr site server at each site. You are planning to use PXE boot to deploy a new Windows 7 image. You need to deploy the image to all office locations. When you attempt to perform a PXE boot, it fails at each

  office location.

  You need to prepare the infrastructure.

  What should you do? (Choose all that apply.)

  A. On each VLAN or subnet, create an IP helper for PXE that points to the PXE service point in each office.
  B. Install a single PXE service point in the Los Angeles office.
  C. On each VLAN or subnet, create an IP helper for PXE that points to the PXE service point in the Los Angeles office.
  D. Install a PXE service point in each office.
  E. Create a single IP helper for PXE that points to the DHCP server in the Los Angeles office.
  F. Create a single IP helper for PXE that points to the DHCP server in each office.
  C. On each VLAN or subnet, create an IP helper for PXE that points to the PXE service point in the Los Angeles office.
  D. Install a PXE service point in each office.

  ---

  This dump's question is not complete.

  MS exam question mention Deployment share is only setup at los Angeles office.

  one of question from testlets

• Question 62:

  A company network includes Windows 7 client computers and DirectAccess.

  When using DirectAccess, users cannot connect to the companys internal resources.

  You need to create a batch file that users can execute to trace all network traffic for DirectAccess from their home computers.

  Which command should you use? To answer, drag the appropriate terms from the list of terms to the correct location or locations in the work area.

  Select and Place:

  

  

• Question 63:

  Your company infrastructure includes a Windows Server 2008 R2 file server and 1,000 Windows 7 Enterprise client computers.

  The company wants to require a secure connection between client computers and the file server.

  You need to create and deploy a Group Policy object (GPO) that includes a rule for Windows Firewall with Advanced Security.

  What should you do?

  A. Create an Isolation rule and specify Request authentication for inbound and outbound connections.
  B. Create a Tunnel rule and specify Gateway-to-client as the tunnel type.
  C. Create a Server-to-server rule and specify the endpoints as Any IP address and the file server IP address.
  D. Create an Authentication exemption rule and add the file server IP address to the Exempt Computers list.
  C. Create a Server-to-server rule and specify the endpoints as Any IP address and the file server IP address.

  ---

  The PDC emulator master also serves as the machine to which all domain controllers in the domain will synchronise their clocks. It, in turn, should be configured to synchronise to an external NTP time source http://en.wikipedia.org/wiki/Primary_Domain_Controller

• Question 64:

  Your network contains an Active Directory domain. What should you do next?

  A. Create a computer collection that contains the computer account for computer1.
  B. Create a distribution group that contains the computer account for computer1.
  C. Create a child domain and move the computer account for computer1 to the child domain.
  D. Create a security group that contains the computer account for computer1.
  B. Create a distribution group that contains the computer account for computer1.

  ---

  Original answer is B but some ppl believe is A. so i put it as A ------------------------------------------------------------------------------------- CheddaBob from United States - Apr 18 2012, 8:40 PM Report Spam @looller Answer is A. I took the test late December. I used a different dump that had the correct answer. -------------------------------------------------------------------------------------- looller from United States - Apr 17 2012, 9:42 PM Report Spam I think the answer is "A" here? anyone agree? answer given is B

• Question 65:

  Your company plans to upgrade 1,000 client computers to Windows 7.

  The company uses a custom line-of-business application that is frequently updated.

  The application is not compatible with Windows 7.

  You need to ensure that the company can use the application.

  You also need to ensure that the application can be updated with the least amount of administrative effort.

  What should you do?

  A. Deploy Microsoft Enterprise Desktop Virtualization (MED-V) v2 to all Windows 7 client computers, and distribute the virtual machine image and updates through MED-V TrimTransfer.
  B. Deploy Microsoft Enterprise Desktop Virtualization (MED-V) v2 to all Windows 7 client computers, and distribute the virtual machine image and updates through Microsoft System Center Configuration Manager.
  C. Configure Windows XP Mode on all Windows 7 client computers, and distribute the virtual machine image and updates through a file share resource.
  D. Configure Windows XP Mode on all Windows 7 client computers, and distribute the virtual machine image and updates through Microsoft System Center Configuration Manager.
  B. Deploy Microsoft Enterprise Desktop Virtualization (MED-V) v2 to all Windows 7 client computers, and distribute the virtual machine image and updates through Microsoft System Center Configuration Manager.

• Question 66:

  A network has a single domain with 1,000 client computers that run Windows 7.

  A large number of software installation scripts are configured to run on the client computers.

  You need to recommend a Group Policy setting that allows users to log on to their computers as soon as possible at first boot.

  What should you recommend?

  Hot Area:

  

  

• Question 67:

  Your company has 1,000 client computers that run Windows XP Professional x64.

  You are planning to deploy Windows 7 Enterprise x64.

  The company uses an application that is incompatible with Windows 7 Enterprise x64.

  You have the following requirements:

  You need to design a solution that meets the requirements.

  What should you do?

  A. Install the application on all client computers by using Group Policy, and then use the Compatibility tab.
  B. Install the Microsoft Application Virtualization (App-V) client on each client computer, and run the application in offline mode.
  C. Install the Microsoft Enterprise Desktop Virtualization (MED-V) package on each client computer.
  D. Install the Microsoft Application Virtualization (App-V) client on each client computer, and stream the application by using App-V.
  C. Install the Microsoft Enterprise Desktop Virtualization (MED-V) package on each client computer.

• Question 68:

  Your company has an Active Directory Domain Services (AD DS) forest with a single domain. A server has the Windows Deployment Services (WDS) role installed. You create a Windows 7 image.

  You plan to use the Lite Touch Installation deployment method to deploy the Windows 7 image.

  You need to design a deployment strategy that will install an image on unknown client computers only if administrative approval is granted.

  What should you do?

  A. Create a multicast transmission for the Windows 7 image.
  B. Use an Auto-Add policy on the WDS server.
  C. Create a unicast transmission for the Windows 7 image.
  D. Use DHCP rogue detection on the WDS server.
  B. Use an Auto-Add policy on the WDS server.

  ---

  http://technet.microsoft.com/en-us/library/cc731409(v=ws.10).aspx#BKMK_2

  

  untitled

• Question 69:

  Your company has 1,000 computers in the main office and 20 computers in store kiosks. All the computers run Windows 7 Enterprise. The kiosk computers do not have network connections. The company brands the Internet Explorer program window on all computers by displaying the company logo at the left end of the title bar. The company changes its logo.

  You have the following requirements:

  You need to define Internet Explorer settings to support the requirements.

  What should you do?

  A. Use the Internet Explorer Administration Kit (IEAK) to create a custom configuration-only deployment package on the main office computers. Create a deployment CD for the kiosk computers.
  B. Use the Internet Explorer Administration Kit (IEAK) to create a custom configuration-only deployment package on the main office computers. Enable automatic version synchronization and specify a flash drive for the path. Distribute the configuration package to the kiosk computers.
  C. Save the logo as Logo.png and copy the file to the C:\Windows\Branding\ directory on each kiosk computer. Create and distribute a new OpenSearch description file for the main office computers.
  D. Use the Internet Explorer Administration Kit (IEAK) to create a custom configuration-only deployment package. Copy the setup file to a flash drive, and distribute the file to all computers.
  A. Use the Internet Explorer Administration Kit (IEAK) to create a custom configuration-only deployment package on the main office computers. Create a deployment CD for the kiosk computers.

  ---

  Hints:

  Kiosk computer do not have network connections, deployment CD is needed.

• Question 70:

  Your network has a single domain with 1,000 client computers that run Windows 7. You use Microsoft System Center Configuration Manager 2007 to distribute and install software applications. All users have standard user accounts.

  You plan to use Group Policy to ensure that application installation functions properly.

  You need to design the User Account Control (UAC) policy.

  Which setting should you select? To answer, select the appropriate setting in the work area.

  Hot Area: