Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 251:

  You have an Exchange Server 2010 Service Pack l (SP1) organization.

  You need to ensure that a user named User1 can manage the properties of all the public folders in the organization. Which cmdlet should you use?

  A. New-ManagementScope
  B. Set-Mailbox
  C. Set-ManagementRoleAssignment
  D. New-MailContact
  E. Set-MailUser
  F. Set-Group
  G. Set-MailboxFolderPermissions
  H. New-TransportRule
  I. New-ManagementRoleAssignment.
  J. Add-ADPerrnission
  I. New-ManagementRoleAssignment.

  ---

  New-ManagementRoleAssignment -Name "Public Folder Management for User1" -Role "Public Folder Management" -User User1

  Reference: http://technet.microsoft.com/en-us/library/dd335193 http://technet.microsoft.com/en-us/library/dd876947.aspx

• Question 252:

  All domain controllers in the forest run Windows Server 2003 Service Pack 2 (SP2). All client computers run Windows XP SP2.

  You have an Exchange Server 2003 organization. All servers in the organization run Exchange Server 2003 Service Pack 1 (SP1).

  Corporate security policy states that the Exchange servers cannot be managed by using Remote Desktop sessions.

  You plan to deploy Exchange Server 2010 SP1 servers to the network. You need to ensure that you can run the Exchange Server 2010 SP1 management tools from a client computer.

  What should you do on the client computer?

  A. Modify the Internet Information Services (MS) authentication settings.
  B. Suppress link state updates.
  C. Install Windows 7.
  D. Run setup /nprs:server5.
  E. Install Exchange Server 2003 SP2.
  F. Add a mail exchange (MX) record to the public DNS 2one.
  G. Run setup /r:mt.
  H. Install Windows Server 2008 R2.
  I. Modify the smart host settings.
  J. Run setup /rprs:server5.
  C. Install Windows 7.

  ---

  Client needs to Windows 7 (x64) or Vista SP2 (x64)

• Question 253:

  You have a server that runs Windows Server 2008 Service Pack 2 (SP2). You plan to install Exchange Server 2010 on the server.

  You need to install the Exchange Server 2010 prerequisites for the Mailbox, Client Access, and Hub Transport server roles.

  What should you do on the server?

  A. Install Microsoft .NET Framework 3.5 Service Pack 1 (SP1). Install Windows Management Framework. Run ServerManagerCmd.exe -IP ExchangeTypical.xml.
  B. Install Microsoft .NET Framework 3.5 Service Pack 1 (SP1). Install Windows Remote Management (WinRM) 2.0. Run ServerManagerCmd.exe -IP ExchangeBase.xml.
  C. Install Windows Management Framework. Install Message Queuing. Install the Web Server role.
  D. Install Windows Management Framework. Install the Web Server role. Install the RPC over HTTP Proxy component.
  A. Install Microsoft .NET Framework 3.5 Service Pack 1 (SP1). Install Windows Management Framework. Run ServerManagerCmd.exe -IP ExchangeTypical.xml.

• Question 254:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  The network contains internal DNS servers.

  You need to ensure that the Hub Transport servers use external DNS servers when they resolve Internet names.

  What should you modify?

  A. the message delivery properties of the Hub Transport global settings
  B. the properties of the default remote domain
  C. the properties of the Hub Transport server object
  D. the properties of a Send connector
  C. the properties of the Hub Transport server object

  ---

  Configured on the Hub Transport server properties window, External DNS lookups tab.

  

  Reference: http://technet.microsoft.com/en-us/library/bb123514.aspx

• Question 255:

  You have an Exchange organization named Contoso, Ltd. All servers in the organization have Exchange Server 2010 SP1 installed. The organization contains an Edge Transport Server.

  Users from a company named Fabrikam, Inc., send email messages over the Internet by using the @fabrikam.com email address suffix.

  Contoso acquires Fabrikam.

  You need to ensure that messages sent from Fabrikam users to Contoso users have the contoso.com email address suffix in their source address.

  What should you create?

  A. an accepted domain
  B. an address rewrite entry
  C. an e-mail address policy
  D. a Receive connector
  B. an address rewrite entry

  ---

  You use address rewriting to present a consistent appearance to external recipients of messages from your Exchange 2010 organization. Address rewriting can be valuable to organizations that use third-party vendors to provide e-mail

  support and services. Customers and partners expect e- mail messages to come from the organization, not a third-party vendor. Similarly, after a merger or acquisition, an organization might want all email messages to appear to come from

  the single new organization. The address rewriting feature frees organizations to structure their businesses by business requirements instead of by technical requirements or limitations. You can also use address rewriting to enable

  appropriate routing of inbound messages from outside your Exchange 2010 organization to internal recipients. Address rewriting enables replies to messages that were rewritten to be correctly routed to the original sender of the rewritten

  message.

  You configure Address Rewriting agents on the Receive connector and Send connector on a computer that has the Edge Transport server role installed.

  EMS:

  Enable-TransportAgent -Identity "Address Rewriting Inbound agent" New-AddressRewriteEntry -name "[email protected] to [email protected]" -InternalAddress

  [email protected] -ExternalAddress [email protected] http://technet.microsoft.com/en-us/ library/aa996806

  http://technet.microsoft.com/en-us/library/bb123966.aspx

• Question 256:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

  All servers are configured to use an internal DNS server named DNS1 for host name resolution. You configure an Edge Subscription from Server1 to Server2. You discover that Server1 responds to SMTP requests by using the Server1.contoso.com fully qualified domain name (FQDN). You need to ensure that Server1 responds to the SMTP requests by using the mail.contoso.com FQDN.

  What should you do?

  A. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
  B. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
  C. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
  D. From the Exchange Management Console (EMC), modify the properties of the remote domain.
  E. From the Exchange Management Console (EMC), create a transport rule.
  F. From the Exchange Management Console (EMC), disable the IP Block List feature.
  G. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
  H. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
  B. From the Exchange Management Shell, run the Set-TransportServer cmdlet.

• Question 257:

  You have an Exchange Server 2003 organization. You install an Exchange Server 2010 Edge Transport server on the network.

  You need to ensure that the Edge Transport server can send and receive e-mail messages from the Internet for the organization.

  You configure the Exchange Server 2003 servers to send all e-mails for external recipients to the Edge Transport servers.

  What should you do next?

  A. Create and configure a sharing policy.
  B. Install the Exchange Server 2010 schema extensions.
  C. Create an Edge Subscription file. Copy the file to the Exchange Server 2003 servers.
  D. Create and configure a Send connector on the Edge Transport server. Create and configure a Receive connector on the Edge Transport server.
  D. Create and configure a Send connector on the Edge Transport server. Create and configure a Receive connector on the Edge Transport server.

  ---

  Reference: http://technet.microsoft.com/en-us/library/bb124011.aspx

• Question 258:

  Your company has an Exchange Server 2010 Hub Transport server named Hub1. Hub1 receives all email sent to the company from the Internet.

  You install the antispam agents on Hub1.

  You need to ensure that Hub1 only accepts messages sent to email addresses listed in Active Directory.

  What should you do?

  A. Modify the properties of the Sender Filtering agent.
  B. Modify the properties of the Recipient Filtering agent.
  C. Modify the properties of the default Accepted Domain.
  D. Modify the properties of the default Receive Connector.
  B. Modify the properties of the Recipient Filtering agent.

  ---

  http://technet.microsoft.com/en-us/library/bb123891.aspx

• Question 259:

  You work as the Enterprise Exchange Administrator at ABC.com. The ABC.com network is running in a Microsoft Exchange Server 2010 environment. You are responsible for managing an Exchange Server 2010 server named ABC-EX01. ABC- EX01 supports message tracking. What actions must you take to change the location of the log file used with the message tracking?

  A. You must change the Hub Transport server object properties.
  B. You must set up recipient filtering.
  C. You must configure EdgeSync synchronization.
  D. You must change the Outlook protection rules.
  A. You must change the Hub Transport server object properties.

• Question 260:

  

  Your network contains an Exchange Server 2010 Mailbox server. The server has one mailbox database. A user named User1 reports that several mails have been lost from his mailbox. You need to recover User1's email messages. The solution must not delete any other email messages in the mailbox database.

  What should you do?

  A. Create a database availability group (DAG), restore a backup of the mailbox database file, and then run the Restore-Mailbox cmdlet.
  B. Create a new Mailbox Recovery Database, restore a backup of the database file, and then run the Export-Mailbox cmdlet.
  C. Create a database availability group (DAG), restore a backup of the mailbox database file, and then run the New-MailboxExportRequest cmdlet.
  D. Create a new Mailbox Recovery Database, restore a backup of the database file, and then run the New-MailboxExportRequest cmdlet.
  D. Create a new Mailbox Recovery Database, restore a backup of the database file, and then run the New-MailboxExportRequest cmdlet.