Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 271:

  You have an Exchange Server 2010 Service Pack1 organization. The organization contains a Hub Transport server named Server1 and an Edge Transport sever named Server2. All servers are configured to use an internal DNS server

  named DNS1 for host resolution. You configure an Edge Subscription from Server1 to Server2.

  You need to modify the delayed acknowledgment (ACK) setting of Server2.

  What should you do?

  A. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
  B. From the Exchange Management Console (EMC), create a transport rule.
  C. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
  D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
  E. From the Exchange Management Console (EMC), disable the IP Block List feature.
  F. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
  G. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
  H. From the Exchange Management Console (EMC), modify the properties of the remote domain.
  D. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.

  ---

  Reference: http://technet.microsoft.com/en-us/library/hh529935.aspx

• Question 272:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization. The organization contains a Hub Transport server named Server1 and an Edge Transport server named Server2.

  All servers are configured to use an internal DNS server named DNS1 for host name resolution. You configure an Edge Subscription from Server1 to Server2. You need to modify the delayed acknowledgment (ACK) settings of Server2.

  What should you do?

  A. From the Exchange Management Console (EMC), disable the IP Block List feature.
  B. From the Exchange Management Console (EMC), modify the properties of the accepted domain.
  C. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.
  D. From the Exchange Management Shell, run the Set-TransportConfig cmdlet.
  E. From the Exchange Management Shell, run the Set-TransportServer cmdlet.
  F. From the Exchange Management Console (EMC), modify the properties of the remote domain.
  G. From the Exchange Management Console (EMC), create a transport rule.
  H. From the Exchange Management Shell, run the Set-TransportAgent cmdlet.
  C. From the Exchange Management Shell, run the Set-ReceiveConnector cmdlet.

  ---

  http://technet.microsoft.com/en-us/library/hh529935.aspx

• Question 273:

  You have an Exchange Server 2010 Service Pack 1 (SP1) server that hosts a public folder database named PUBLIC. You need to move the transaction log files of PUBLIC.

  Which cmdlet should you run?

  A. Set-PublicFolderDatabase
  B. Set-MailPublicFolder
  C. Move-DatabasePath
  D. Move-StorageGroupPath
  C. Move-DatabasePath

  ---

  Move-DatabasePath -Identity PUBLIC -LogFolderPath L:\NewFolder

• Question 274:

  You have an Exchange Server 2010 Service Pack 1 (SP1) organization.

  The organization contains two mailbox-enabled users named User1 and User2. You need to ensure that User1 can send email messages as User2.

  Which cmdlet should you use?

  A. Add-ADPermission
  B. Set-Group
  C. Set-MailboxFolderPermissions
  D. Set-Mailbox
  E. New-ManagementRoleAssignment
  F. New-ManagementScope
  G. New-TransportRule
  H. New-MailContact
  I. Set-MailUser
  J. Set-ManagementRoleAssignment
  A. Add-ADPermission

  ---

  Add-ADPermission e.g. Add-ADPermission user2 -User "Domain\User1" -Extendedrights "Send As"

  Reference:

  http://technet.microsoft.com/en-us/library/bb124403.aspx http://technet.microsoft.com/en-us/library/ bb676368.aspx

• Question 275:

  

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  The network contains two Active Directory sites named Site1 and Site2. Each site contains two Client Access servers. All mailbox databases in the organization are replicated to Mailbox servers in both sites.

  All users connect to their mailbox by using Microsoft Office Outlook 2003. You create a Client Access server array named array1.contoso.com in Site1, and then configure all users to connect to array1.contoso.com.

  You verify that all users can connect successfully to array1.contoso.com.

  One month later, all of the servers in Site1 fail.

  You need to ensure that all users can connect to a Client Access server in Site2 by using array1.contoso.com.

  What should you do?

  A. Modify the host (A) record for autodiscover.contoso.com to point to the IP address of a Client Access server in Site2.
  B. Create a Client Access server array named array2.contoso.com in Site2. Rename array2.contoso.com as array1.contoso.com.
  C. Create a Client Access server array named array2.contoso.com in Site1. Remove all of the Client Access servers from array1.contoso.com.
  D. Modify the host (A) record for array1.contoso.com to point to the IP address of a Client Access server in Site2.
  D. Modify the host (A) record for array1.contoso.com to point to the IP address of a Client Access server in Site2.

• Question 276:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  You need to ensure that you can restore a mailbox deleted from a mailbox database if the mailbox was deleted up to six months earlier. The solution must not require a database backup.

  What should you do?

  A. From the properties of the mailbox database, modify the maintenance schedule.
  B. From the properties of a Mailbox server, modify the System Settings.
  C. From the properties of the mailbox, enable single item recovery.
  D. From the Exchange Management Shell, run the New-MailboxSearch cmdlet.
  E. Create a managed custom folder and managed content settings.
  F. From the properties of the mailbox, enable retention hold.
  G. From the properties of the mailbox, enable litigation hold.
  H. From the Exchange Management Shell, run the Export-Mailbox cmdlet.
  I. From the properties of the mailbox database, select the This database can be overwritten by a restore check box.
  J. Create a retention policy and a retention tag.
  K

  ---

  Conflicting answers on this one, for me its straight forward, deletion settings on the Limits tab for mailbox databases.

  

• Question 277:

  You need to modify the internal URL of the Exchange ActiueSync virtual directory.

  Which node should you select from the Exchange Management Console (EMC) to make the modification? To answer, select the appropriate node in the answer area.

  Hot Area:

  

  

• Question 278:

  You work for the ABC Corporation. You are planning to install Exchange 2010 in all domains of the ABC.com forest. The forest structure is shown in the diagram below:

  

  What command should you run to prepare the domains in the ABC.com forest for Exchange 2010?

  A. Setup /PrepareAD /on:ABC.com.
  B. Setup /PrepareDomain:ABC.com.
  C. Setup /pad.
  D. Setup /ps.
  C. Setup /pad.

• Question 279:

  Your network contains an Active Directory domain named contoso.com. The domain contains an Exchange Server 2010 Service Pack 1 organization.

  The domain contains an organizational unit (OU) named Sales.

  You need to configure Outlook Web App to meet the following requirements:

  1. Allow only members of the Sales OU to change their password by using the Exchange Control Panel (ECP).

  2. Prevent all other users from changing their password by using the ECP.

  What should you do? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  1. Create a New Outlook Web App mailbox policy named Accounting.

  2. From the Exchange Management Shell, run Get-mailbox | where-object {$_.distinguishedname -like '*ou=accounting,dc=contoso,dc=com'} | Set-CasMailbox-OWAMailboxPolicy:Accounting.

  3. Modify the Segmentation settings of the default Outlook Web App mailbox policy.

  Reference: http://technet.microsoft.com/en-us/library/dd335142.aspx http://technet.microsoft.com/en-us/library/dd335191.aspx

• Question 280:

  You deploy a new Exchange Server 2010 organization. You send a test message to an external recipient and immediately receive the following nondelivery report (NDR):

  "Delivery has failed to these recipients or groups: [email protected] ([email protected]). The recipient's e-mail system isn't accepting messages now. Please try resending this message later or contact the recipient directly."

  You verify that you can successfully send an e-mail message to [email protected] from an external e- mail system.

  You need to ensure that you can send e-mails to external recipients from within the Exchange organization.

  What should you create?

  A. a Send connector
  B. an accepted domain
  C. an MX record
  D. an SMTP site link
  A. a Send connector

  ---

  Reference: http://technet.microsoft.com/en-us/library/bb232045.aspx