Microsoft 70-662 Online Practice Questions and Exam Preparation

Microsoft 70-662 Online Questions & Answers

• Question 171:

  You have an Exchange 2010 organization. The organization contains a distribution group named Group1. You need to ensure that a user named User1 can add and remove members from Group1. You must prevent User1 from modifying all other groups. What should you do first?

  A. Add User1 to Group1's Managed by list.
  B. Assign User1 as a group moderator for Group1.
  C. Assign the Distributions Groups management role to User1.
  D. Assign the MyDistributionGroups management role to User1.
  A. Add User1 to Group1's Managed by list.

  ---

  

• Question 172:

  You have an Exchange Server 2003 organization.

  You install a new Exchange Server 2010 server in the organization. You need to ensure that you can modify the default email address policy by using the Exchange Management Console (EMC).

  What should you do?

  A. Run the SetEmailAddressPolicy cmdlet
  B. Run the UpdateEmailAddressPolicy cmdlet.
  C. From the Exchange System Manager, modify the properties of the default recipient policy.
  D. From the EMC, select the Email Address Policies tab, rightclick Default Policy, and then click Apply.
  A. Run the SetEmailAddressPolicy cmdlet

• Question 173:

  Your network contains an Exchange Server 2007 Mailbox server named Server1 and an Exchange Server 2010 Mailbox server named Server2. You need to move a mailbox from Server1 to Server2.

  What should you do?

  A. From Server1, run Move-Mailbox.
  B. From Server2, run Move-Mailbox.
  C. From Server1, run New-MoveRequest.
  D. From Server2, run New-MoveRequest.
  D. From Server2, run New-MoveRequest.

• Question 174:

  You have a Exchange 2003 environment. You add a Exchange server 2010 to your system. How do you make sure the new server handles the e-mail address policy?

  A. Use Set-EmailAddressPolicy cmdlet
  B. Use Update-EmailAddressPolicy cmdlet
  C. Use New-EmailAddressPolicy cmdlet
  D. Use Remove-EmailAddressPolicy cmdlet
  A. Use Set-EmailAddressPolicy cmdlet

• Question 175:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  The organization contains two Mailbox servers named Server1 and Server2. Both servers are members of a database availability group (DAG) named DAG1.

  Server1 and Server2 have a copy of a mailbox database named DB1.

  You need to remove the copy of DB1 from Server1.

  What should you do?

  A. From the Exchange Management Console, right-click the database copy and select Remove.
  B. From the Exchange Management Shell, run Remove-MailboxDatabase -Identity DB1\Server1.
  C. From the Exchange Management Console, right-click DAG1 and select Manage Database Availability Group Membership. Remove Server1 from the list and click Manage.
  D. From the Exchange Management Shell, run Clean-MailboxDatabase -Identity DB1.
  A. From the Exchange Management Console, right-click the database copy and select Remove.

  ---

  Use the EAC to remove a mailbox database copy

  1.

  In the console tree, navigate to Organization Configuration > Mailbox.

  2.

  In the result pane, on the Database Management tab, select the mailbox database whose copy you want to remove.

  3.

  In the work pane, on the Database Copies tab, right-click the database copy that you want to remove, and then click Remove.

  4.

  Click Yes to remove the database copy.

  incorrect: not B:

  * Use the Shell to remove a mailbox database copy This example removes a copy of the mailbox database DB1 from the Mailbox server MBX1. Remove- MailboxDatabaseCopy -Identity DB1\MBX1 -Confirm:$False

• Question 176:

  You have an Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed. The organization contains a database availability group (DAG) named DAG1. DAG1 contains three Mailbox servers including a server named Server1. Server1 fails. You restore Server1. You need to ensure that Server1 can replicate mailbox databases from DAG1. What should you do first?

  A. Modify the GUID for Server1.
  B. Remove the object for Server1 from DAG1.
  C. Remove the default mailbox database from Server1.
  D. Disable log truncation for the mailbox databases in DAG1.
  B. Remove the object for Server1 from DAG1.

  ---

  Remove-DatabaseAvailabilityGroupServer -Identity DAG1 -MailboxServer MBX1 ConfigurationOnly

  High level steps to recover Server1:

  1) Remove the failed server's configuration from the DAG by using the Remove- DatabaseAvailabilityGroupServer cmdlet. Because the DAG member being removed was offline and could not be brought online, you must add the

  ConfigurationOnly parameter to the above command.

  2) Reset the server's computer account in Active Directory.

  3) Open a Command Prompt window. Using the original Setup media, run the following command: Setup /

  m:RecoverServer

  4) When the Setup recovery process is complete, add the recovered server to the DAG by using the Add- DatabaseAvailabilityGroupServer cmdlet.

  5) After the server has been added back to the DAG, you can reconfigure mailbox database copies by using the Add-MailboxDatabaseCopy cmdlet.

  Reference:

  http://technet.microsoft.com/en-us/library/dd638206.aspx

• Question 177:

  Your network contains an Active Directory domain named contoso.com. The domain contains an Exchange Server 2010 Service Pack 1 (SP1) organization. You need to ensure that all the members of a mail-enabled group named Sales can modify the contents of a mail-enabled public folder named Folder1. What should you do?

  A. From Active Directory Users and Computers, add the Sales group to the Public Folder management role group.
  B. From the Exchange Management Shell, run the Add-PublicFolderClientPermission cmdlet.
  C. From the Exchange Management Shell, run the Set-MailPublicFolder cmdlet.
  D. From Active Directory Users and Computers, modify the permissions of the Sales group.
  A. From Active Directory Users and Computers, add the Sales group to the Public Folder management role group.

• Question 178:

  You have an Exchange Server 2010 Service Pack 1 organization that contains 20 mailbox databases.

  You configure each database to retain all deleted items for 30 days.

  You need to ensure that all items that pass the retention period are permanently deleted daily between 02:00 and 06:00.

  Which cmdlet should you use?

  A. Set-MailboxDatabase
  B. Set-MailboxServer
  C. Set-OrganizationConfig
  D. Set-RetentionPolicy
  A. Set-MailboxDatabase

• Question 179:

  You work as the enterprise exchange administrator at ABC.com. The ABC.com network consists of a domain named ABC.com.

  The ABC.com network has two mailbox servers named ABC-EX01 and ABC-EX02. ABC- EX01 is running Exchange Server 2007 and ABC-EX02 is running Exchange Server 2010. What actions must you take to shift a mailbox on ABC-EX01

  to ABC-EX02?

  A. You must use msiexec.exe from ABC-EX01.
  B. You must use the New-MoveRequest cmdlet from ABC-EX02.
  C. You must use wecutil qc from ABC-EX02.
  D. You must use wuauclt.exe /detectnow from ABC-EX02.
  B. You must use the New-MoveRequest cmdlet from ABC-EX02.

• Question 180:

  You have a hosted Exchange organization. All servers in the organization have Exchange Server 2010 Service Pack 1 (SP1) installed.

  You need to group a set of users for administrative delegation.

  What should you create?

  A. a managed folder mailbox policy
  B. a new distribution group
  C. a new management role
  D. a new role assignment policy
  D. a new role assignment policy

  ---

  When you change role assignments, the changes you make will probably be between role groups and role assignment policies. By adding, removing, or modifying role assignments to or from these role assignees, you can control what

  permissions are given to your administrators and users, in effect turning on and off management of related features. Regular role assignments enable the role assignee to access the management role entries made available by the associated

  management role. If multiple management roles are assigned to a role assignee, the management role entries from each management role are aggregated and applied. This means that if a role assignee is assigned the Transport Rules and

  Journaling roles, the roles are combined, and all the associated management role entries are given to the role assignee. If the role assignee is a role group or role assignment policy, the permissions provided by the roles are then given to the

  users assigned to the role group or role assignment policy. The management role assignment policy is a special object in Exchange 2010. Users are associated with the role assignment policy when their mailboxes are created or if you

  change the role assignment policy on a mailbox. This is also what you assign end-user management roles to. The combination of all the roles on a role assignment policy defines everything that the user can manage on his or her mailbox or

  distribution groups.

  Reference:

  http://technet.microsoft.com/en-us/library/dd638100.aspx http://technet.microsoft.com/en-us/library/ dd335131.aspx