Microsoft 70-642 Online Practice Questions and Exam Preparation

Microsoft 70-642 Online Questions & Answers

• Question 191:

  Your network contains two Active Directory forests named contoso.com and fabrikam.com. Fabrikam.com contains a server named Server1 that has the Print and Document Services server role installed.

  Server1 contains 50 shared printers.

  You join Server1 to the contoso.com domain.

  You need to ensure that all of the shared printers on Server1 are listed in the contoso.com forest. Which tool should you use? (Each correct answer presents a complete solution. Choose two.)

  A. Printui.exe
  B. Print Management
  C. Pmmngr.vbs
  D. Pubprn.vbs
  E. Setprinter.exe
  B. Print Management
  D. Pubprn.vbs

  ---

  To migrate print servers by using Print Management

  Open Print Management.

  In left pane, click Print Servers, right-click the print server that contains the printer queues that you want to export, and then click Export printers to a file. This starts the Printer Migration Wizard.

  On the Select the file location page, specify the location to save the printer settings, and then click Next to save the printers. Right-click the destination computer on which you want to import the printers, and then click Import printers from a

  file. This launches the Printer Migration Wizard. On the Select the file location page, specify the location of the printer settings file, and then click Next.

  On the Select import options page, specify the following import options:

  Import mode. Specifies what to do if a specific print queue already exists on the destination computer. List in the directory. Specifies whether to publish the imported print queues in the Active Directory Domain Services.

  Convert LPR Ports to Standard Port Monitors. Specifies whether to convert Line Printer Remote (LPR) printer ports in the printer settings file to the faster Standard Port Monitor when importing printers.

  Click Next to import the printers.

  Pubprn.vbs - Publishes a printer to the Active Directory Domain Services. http://technet.microsoft.com/en-us/library/cc753116(v=ws.10).aspx To migrate print servers by using a command prompt

  To open a Command Prompt window, click Start, click All Programs, click Accessories, right- click Command Prompt, and then click Run as administrator.

  Type:

  CD %WINDIR%\System32\Spool\Tools Printbrm -s \\ -b -f .printerExport Type:

  Printbrm -s \\ -r -f .printerExport http://technet.microsoft.com/en-us/library/cc722360.aspx

• Question 192:

  Your network contains a server named Server1. Server1 has the DHCP server role installed and contains multiple scopes.

  You restore the DHCP database and discover that the active IP address leases are not displayed. You need to ensure that all IP address leases are displayed.

  What should you do?

  A. Reconcile all of the scopes.
  B. Run jetpack.exe dhcp.mdb temp.mdb.
  C. Restart the DHCP Server service.
  D. Authorize Server1.
  C. Restart the DHCP Server service.

  ---

  Recovery: Restoring DHCP Database from Backup:

  If the DHCP server database becomes corrupted or is lost, simple recovery is possible by replacing the server database file (Dhcp.mdb), located in the % SystemRoot %\System32\Dhcp folder, with a backup copy of the same file. You can

  then perform a simple file copy to overwrite the current corrupted database with a backup copy of the same file.

  If DHCP Manager has been used previously to enable backup, you can obtain the backup copy of the server database file located in the % SystemRoot % \System32\Dhcp\Backup folder. As an option, you can also choose to restore the

  Dhcp.mdb file from a tape backup or other backup media. Before restoring the database file from backup, the DHCP service must first be stopped. Once you have copied the backup file to the % SystemRoot %\System32 \Dhcp folder from

  your preferred backup source, you can restart the DHCP service.

  To stop the DHCP server service, type the following at a command prompt: net stop dhcpserver Once the DHCP service has been stopped, the following procedure can be used to safely restore a backup copy of the database from either

  backup media or the DHCP service backup folder. First, move the files from your existing DHCP folder to a different folder location, such as \Olddhcp. Be careful to keep the DHCP folder structure intact. For example, type the following set of

  commands at a command prompt to perform this step:

  md c:\Olddhcp move % SystemRoot % \system32\DHCP\*.* C:\Olddhcp Next, remove the corrupted server database file. This can also be done at the command prompt:

  del % SystemRoot % \system32\DHCP\Dhcp.mdb

  You can then copy the backup database file into the DHCP service folder. The path to be used when performing the actual copy operation varies (as shown in Table 4.15), depending on the specific server version of Windows running on the

  computer where the DHCP database file is being restored.

  http://technet.microsoft.com/en-us/library/cc958954.aspx

• Question 193:

  Your network contains an Active Directory domain.

  Your company is implementing Network Access Protection (NAP). You need to define which network resources non-compliant client computers can access.

  What should you configure?

  A. the Windows Authentication authentication provider
  B. remediation server groups
  C. the RADIUS Accounting accounting provider
  D. system health validators (SHVs)
  E. IKEv2 client connections
  F. the Windows Accounting accounting provider
  G. the RADIUS Authentication authentication provider
  H. Group Policy preferences
  I. health policies
  J. connection request policies
  B. remediation server groups

  ---

  Remediation server groups - Are used to specify servers that are available to noncompliant NAP clients for the purpose of remediating their health state to comply with health requirements. The type of remediation servers that are required depend on your health requirements and network access methods. After you create a remediation server group, you must add this group to a network policy for noncompliant computers. http://technet.microsoft.com/en-us/library/dd125372(v=ws.10).aspx

• Question 194:

  You install Microsoft Network Monitor 3.4 on a server.

  You start Network Monitor and you capture data overnight.

  The next morning, you discover that the server responds very slowly. You open Task Manager as shown in the exhibit. (Click the Exhibit button.)

  

  You need to reduce the amount of system resources consumed on the server when Network Monitor captures network data. What should you do?

  A. Use Netmon and enable pmode for the network adapter.
  B. Use Netmon with conversations enabled.
  C. Use Nmcap and enable pmode for the network adapter.
  D. Use Nmcap with conversations disabled.
  D. Use Nmcap with conversations disabled.

• Question 195:

  Your network has an internal network and a perimeter network. A firewall named Firewall1 separates the perimeter network and the Internet.

  You deploy a server named Server1 to the perimeter network.

  You configure Server1 as a PPTP VPN server.

  You need to ensure that users from the Internet can establish VPN connections to Server1. The solution must minimize the number of open ports on Firewall1. What should you open on the firewall? (Each correct answer presents part of the

  solution.

  Choose three.)

  A. UDP 1723
  B. UDP 4500
  C. TCP 500
  D. TCP 4500
  E. UDP 500
  F. Protocol 50
  G. TCP 1723
  H. Protocol 47
  A. UDP 1723
  G. TCP 1723
  H. Protocol 47

  ---

  Ref: http://www.speedguide.net/port.php?port=1723

• Question 196:

  Your network contains a domain controller named DC1.

  DC1 hosts a zone named fabhkam.com. The properties of the zone are shown in the exhibit.

  (Click the Exhibit button.)

  

  You need to ensure that only secure dynamic updates are accepted for the fabrikam.com zone.

  What should you do first?

  A. Configure the zone to be stored in Active Directory.
  B. Change the zone to a secondary zone.
  C. Pause the zone.
  D. Modify the NTFS permissions of the zone file.
  A. Configure the zone to be stored in Active Directory.

• Question 197:

  Your network contains two servers named Server1 and Server2 that run Windows Server 2008 R2. The network contains an client named Computer1 that runs Windows7.

  All communication between Server1 and Server2 is encrypted by using IPSec. Communication between the server and the client does not require IPSec encryption.

  You need to ensure that you can connect to Server1 by using the IP Security Monitor on Computer1.

  What should you do?

  A. Apply an IP Security policy to Computer1.
  B. Create a connection security rule on Computer1.
  C. Add a value to the PolicyAgent registry key on Server1.
  D. Modify the Advanced Audit Policy Configuration on Server1.
  C. Add a value to the PolicyAgent registry key on Server1.

  ---

  -Valid for Windows 7 and Vista client-

  On the computer (2008) you want to remotely manage or monitor, click Start, click Run, type regedit, and then click OK.

  Locate and then click the following registry subkey:

  HKEY_LOCAL_MACHINE \ SYSTEM \ CurrentControlSet \ Services \ PolicyAgent On the Edit menu, select New, and then click DWORD Value.

  Write EnableRemoteMgmt and then press ENTER.

  Click the right mouse button on the entry EnableRemoteMgmt and then click Modify.

  In the Value data box, type 1, and then click OK.

  Exit Registry Editor.

  Start the RemoteRegistry. To do this, type net start RemoteRegistry at a command prompt, and then press ENTER. Start the PolicyAgent. To do this, type net start policyagent at the command prompt, and then press ENTER. Make sure the

  user who will administer or supervise the team has administrator privileges on the computer. In the Advanced Security section of Windows Firewall, enable service management rules remotely.

• Question 198:

  Your network contains an Active Directory domain. The domain contains two servers named Server1 and Server2. All servers run Windows Server 2008 R2 and have Windows Firewall turned on.

  You need to ensure that you can use Event Viewer on Server2 to access the Application log on Server1.

  What should you do?

  A. On Server2, create a new event subscription.
  B. On Server2, modify the outbound firewall rules.
  C. On Server1, modify the inbound firewall rules.
  D. On Server1, modify the settings on the Application log.
  C. On Server1, modify the inbound firewall rules.

• Question 199:

  Your network contains an Active Directory domain.

  The network contains a standalone server that runs Windows Server 2008 R2. The server has a static IP address.

  You need to configure the server as a DHCP Relay Agent.

  What should you do first?

  A. Install the Health Registration Authority (HRA) role service on the server.
  B. Configure the server to use a dynamic IP address.
  C. Install the Routing and Remote Access service (RRAS) role service on the server.
  D. Join the server to the domain.
  C. Install the Routing and Remote Access service (RRAS) role service on the server.

• Question 200:

  Your network contains a server named Server1 that runs Windows Server 2008 R2 Service Pack 1 (SP1). Server1 has the File Services server role installed.

  On Server1, you create a folder named HomeDrive.

  All users have a home folder that has the same name as their user account. Each home folder is stored in the HomeDrive folder. You need to configure file storage rules for Server1 to meet the following requirements:

  Files that are not accessed for 180 days must be deleted.

  All users except for User5 must be prevented from saving audio files and/or video files. Only User3, User4, and Users must have a limit of 5,000 MB of disk space in their home folder.

  What should you do? (Each correct answer presents part of the solution. Choose three.)

  A. Create a file screen and apply the screen to the HomeDrive folder.
  B. Create a file screening exception and apply the exception to the HomeDrive folder.
  C. Create a quota template and assign a quota derived from the quota template to the HomeDrive folder.
  D. Create a quota template and assign a quota derived from the quota template to the User3, User4, and Users folders.
  E. Create a file management task and apply the task to the HomeDrive folder.
  B. Create a file screening exception and apply the exception to the HomeDrive folder.
  D. Create a quota template and assign a quota derived from the quota template to the User3, User4, and Users folders.
  E. Create a file management task and apply the task to the HomeDrive folder.

  ---

  Ref: http://technet.microsoft.com/en-us/library/cc725711.aspx http://technet.microsoft.com/en-us/library/cc730822.aspx http://technet.microsoft.com/en-us/library/dd759227.aspx