Microsoft 70-537 Online Practice Questions and Exam Preparation

Microsoft 70-537 Online Questions & Answers

• Question 91:

  NOTE: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and Node4.

  You plan to replace Node2.

  You need to drain the active workloads that run on Node2.

  Solution: From the hardware lifecycle host, you run the Stop-AzsScaleUnitNode cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  The Drain action evacuates all active workloads by distributing them among the remaining nodes in that particular scale unit. To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.

  Incorrect Answers:

  A: The Stop-AzsScaleUnitNode cmdlet turns off the node. It's the same as if you press the power button. It does not send a shutdown signal to the operating system. For planned power off operations, make sure you drain a scale unit node first.

  References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node

• Question 92:

  Your network contains an Active Directory forest named adatum.com.

  You deploy an Azure Stack integrated system.

  You implement federation between adatum.com and Azure Stack.

  You need to ensure that a user named [email protected] can manage Azure Stack from the Azure Stack administrator portal.

  Which cmdlet should you run?

  A. Set-ServiceAdminOwner
  B. Set-AzsUserSubscription
  C. New-CloudAdminUser
  D. Set-CloudAdminPassword
  A. Set-ServiceAdminOwner

  ---

  References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-integrate-identity

• Question 93:

  NOTE: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have an Azure Stack integrated system that contains four nodes named Node1, Node2, Node3 and Node4.

  You plan to replace Node2.

  You need to drain the active workloads that run on Node2.

  Solution: From the hardware lifecycle host, you run the Disable-AzsScaleUnitNode cmdlet.

  Does this meet the goal?

  A. Yes
  B. No
  A. Yes

  ---

  The Drain action evacuates all active workloads by distributing them among the remaining nodes in that particular scale unit. To run the drain action through PowerShell, use the Disable-AzsScaleUnitNode cmdlet.

  References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-replace-node

• Question 94:

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is

  exactly the same in each question in this series.

  Start of repeated scenario.

  Your company has a network that contains an Active Directory forest named fabrikam.com. The forest is synchronized to a Microsoft Azure Active Directory (Azure AD) tenant and has an Azure subscription.

  The company also has an Azure AD tenant named contoso.com. Contoso.com has an Azure subscription. Contoso.com includes foreign principals.

  The network contains the computers configured as shown in the following table.

  

  Fabrikam.com contains a user named User1.

  For operating system deployment, the company uses a custom operating system image of Windows Server 2016 Datacenter named Image1.

  You have an Azure Stack integrated system that is accessed by using the following endpoints:

  1.

  https://portal.fabrikam.com

  2.

  https://adminportal.fabrikam.com

  3.

  https://management.fabrikam.com

  4.

  Privileged endpoint: 192.168.100.100

  5.

  Hardware lifecycle host: 192.168.101.101

  6.

  https://adminmanagement.fabrikam.com

  You onboard contoso.com as a guest directory tenant on the Azure Stack integrated system.

  You implement in the following Azure Stack providers:

  1.

  SQL Server

  2.

  App Service

  End of repeated scenario.

  You need to ensure that the foreign principals for contoso.com can access Azure Stack services.

  Which URL should the foreign principals use to sign in to Azure Stack?

  A. https://portal.fabrikam.com
  B. https://adfs.fabrikam.com/contoso.com
  C. https://portal.fabrikam.com/contoso.com
  D. https://adminportal.fabrikam.com/contoso.com
  C. https://portal.fabrikam.com/contoso.com

• Question 95:

  DRAG DROP

  An Azure Stack Development Kit deployment is used by a developer at your company.

  After the developer makes several modifications, the deployment becomes unresponsive.

  You need to redeploy the development kit to the same physical host.

  Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

  Select and Place:

  

  

  ---

  References: https://docs.microsoft.com/en-us/azure/azure-stack/asdk/asdk-redeploy https://docs.microsoft.com/en-us/azure/azure-stack/asdk/asdk-deploy-powershell

• Question 96:

  DRAG DROP

  Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.

  Start of repeated scenario.

  Your network contains an Active Directory forest named contoso.com

  You deploy an Azure Stack integrated system named Prod to a production environment. You also deploy an Azure Stack integrated system named Dev to a development environment. The developers who access Dev change frequently.

  The Azure Stack integrated systems and the contoso.com forest are federated.

  The on-premises network contains a Hyper-V host that hosts a Red Hat Enterprise Linux virtual machine named Linux1. Linux1 has the following characteristics:

  1. A 2-TB disk

  2. Generation 1

  3. 10 virtual cores

  4. 128 GB of RAM

  5. A disk named LinuxVhd.vhdx

  You plan to deploy infrastructure as a service (IaaS) to Dev for developer projects. The Marketplace on Dev is configured and ready to publish items. Dev contains one plan named Dev_Plan1 and one offer named Dev_Offer1.

  Prod contains two plans and two offers. One of the offers is named Offer1.

  All the IaaS and platform as a service (PaaS) tenant data must be backed up to an external location. The solution must ensure that the data can be restored if the datacenter that hosts Prod becomes unavailable.

  End of repeated scenario.

  You need to prepare a custom image based on Linux1 that will be deployed to Prod. The solution must prevent any changes to the current disk of Linux1.

  Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

  NOTE: More than one order of answer choices is correct. You will receive credit for any of the correct orders you select.

  Select and Place:

  

  

  ---

  Azure Stack does not support the VHDX format. Azure supports only fixed VHD. You can use Hyper-V Manager to convert the disk to VHD format, or you can use the convert-vhd cmdlet.

  The maximum size that's allowed for the VHD is 1,023 GB.

  References:

  https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-redhat-create-upload-vhd

• Question 97:

  You have an Azure Stack integrated system that has the following deployment details:

  1.

  Region: East

  2.

  Naming prefix: azs

  3.

  External domain name: cloud.fabrikam.com

  Which URL should you direct tenants to use based on the deployment details?

  A. https://adminportal.cloud.fabrikam.com
  B. https://portal.east.cloud.fabrikam.com
  C. https://portal.azs.cloud.fabrikam.com
  D. https://adminportal.azs.cloud.fabrikam.com
  E. https://portal.cloud.fabrikam.com
  F. https://adminportal.east.cloud.fabrikam.com
  B. https://portal.east.cloud.fabrikam.com

  ---

  References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-integrate-dns#

• Question 98:

  NOTE: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution,

  while others might not have a correct solution.

  After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.

  You have an Azure Stack integrated system that runs in a connected environment.

  You need to recommend an interval for installing Microsoft software update packages to Azure Stack. The solution must ensure that you can receive Microsoft support.

  Solution: You recommend that Microsoft software updates be installed every six months.

  Does this meet the goal?

  A. Yes
  B. No
  B. No

  ---

  For your Azure Stack deployment to remain in support, it must run the most recently released update version or run either of the two preceding update versions.

  Microsoft will release update packages for Azure Stack integrated systems on a regular cadence that will typically fall on the fourth Tuesday of every month.

  Thus to remain in support you must be running one of the last three update versions and, as an update version is released every month, you need to install updates at least every three months.

  References:

  https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-servicing-policy

  https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-updates

• Question 99:

  You have an Azure Stack integrated system in the perimeter network.

  You need to ensure that users in the Internet can access Azure Stack Storage blobs.

  Which TCP ports should you open on the firewall?

  A. 20 and 21
  B. 137 only
  C. 80 and 443
  D. 445 and 5445
  C. 80 and 443

  ---

  Storage Blob requires port 80 for http and port 443 for https.

  References: https://docs.microsoft.com/en-us/azure/azure-stack/azure-stack-integrate-endpoints