Microsoft 70-412 Online Practice Questions and Exam Preparation

Microsoft 70-412 Online Questions & Answers

• Question 261:

  HOTSPOT

  Your network contains one Active Directory forest named contoso.com.

  The forest contains a single domain.

  The domain contains the domain controllers is configured as shown in the following table.

  

  The forest contains a member server named Server1.

  Server1 has an IP address of 172.16.10.66.

  The forest has the following Active Directory subnet configuration.

  

  Use the drop down menus to select the answer choice that complete each statement.

  Hot Area:

  

  

  ---

  S1 -172.16.10.66/26, /26 = 63 IP address, Site 2 is located in this subnet. You be automatically redirected on DC2 on your IP addressing.

• Question 262:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. All servers run Windows Server 2012 R2. The domain contains two domain controllers. The domain controllers are configured as shown in the following table.

  

  On DC1, you create an Active Directory-integrated zone named Zone1. You verify that Zone1 replicates to DC2.

  You use DNSSEC to sign Zone1.

  You discover that the updates to Zone1 fail to replicate to DC2.

  You need to ensure that Zone1 replicates to DC2.

  What should you configure on DC1?

  To answer, select the appropriate tab in the answer area.

  Hot Area:

  

  

  ---

  We most allow and configure zone transfers.

  To modify zone transfer settings using the Windows interface

  Open DNS Manager.

  Right-click a DNS zone, and then click Properties.

  On the Zone Transfers tab, do one of the following:

  - To disable zone transfers, clear the Allow zone transfers check box.

  - To allow zone transfers, select the Allow zone transfers check box. If you allowed zone transfers, do one of the following:

  - To allow zone transfers to any server, click To any server.

  - To allow zone transfers only to the DNS servers that are listed on the Name Servers tab, click Only to servers listed on the Name Servers tab.

  - To allow zone transfers only to specific DNS servers, click Only to the following servers, and then add the IP address of one or more DNS servers.

  Reference: Modify Zone Transfer Settings

• Question 263:

  You have a server named Server1 that runs Windows Server 2012 R2.

  Each day, Server1 is backed up fully to an external disk.

  On Server1, the disk that contains the operating system fails.

  You replace the failed disk.

  You need to perform a bare-metal recovery of Server1 by using the Windows Recovery Environment (Windows RE).

  What should you use?

  A. The Wbadmin.exe command
  B. The Repair-bde.exe command
  C. The Get-WBBareMetalRecovery cmdlet
  D. The Start-WBVolumeRecovery cmdlet
  A. The Wbadmin.exe command

  ---

  Wbadmin enables you to back up and restore your operating system, volumes, files, folders, and applications from a command prompt.

  Wbadmin start sysrecovery runs a recovery of the full system (at least all the volumes that contain the operating system's state). This subcommand is only available if you are using the Windows Recovery Environment. *Wbadmin start sysrecovery -backupTarget

  Specifies the storage location that contains the backup or backups that you want to recover. This parameter is useful when the storage location is different from where backups of this computer Incorrect Answers:

  B. Accesses encrypted data on a severely damaged hard disk if the drive was encrypted by using BitLocker. Repair-bde can reconstruct critical parts of the drive and salvage recoverable data as long as a valid recovery password or recovery key is used to decrypt the data.

  C. Gets the value that indicates whether the ability to perform bare metal recoveries from backups has been added to the backup policy (WBPolicy object).

  D. Starts a volume recovery operation.

  References: Wbadmin start sysrecovery https://technet.microsoft.com/en-us/library/cc742118.aspx

• Question 264:

  The root domain of the Adatum forest is Adatum.local. The contoso.com domain tree is part of the Adatum forest. Don has an account in the australia.contoso.com domain and is signing on to a computer that is a member of the

  computers.adatum.local domain.

  No additional UPNs have been configured. Which UPN suffix will Don use to sign on to this computer?

  A. @adatum.com
  B. @adatum.local
  C. @computers.adatum.local
  D. @australia.contoso.com
  B. @adatum.local

• Question 265:

  You have five servers that run Windows Server 2012 R2. The servers have the Failover Clustering feature installed. You deploy a new cluster named Cluster1. Cluster1 is configured as shown in the following table.

  

  Site2 is a disaster recovery site.

  Server1, Server2, and Server3 are configured as the preferred owners of the cluster roles. Dynamic quorum management is disabled.

  You plan to perform hardware maintenance on Server3.

  You need to ensure that if the WAN link between Site1 and Site2 fails while you are performing maintenance on Server3, the cluster resource will remain available in Site1.

  What should you do?

  A. Add a file share witness in Site1.
  B. Enable DrainOnShutdown on Cluster1.
  C. Remove the node vote for Server4 and Server5.
  D. Remove the node vote for Server3.
  C. Remove the node vote for Server4 and Server5.

  ---

  Recommended Adjustments to Quorum Voting

  When enabling or disabling a given WSFC (Windows Server Failover Clustering) node's vote, follow these guidelines:

  Exclude secondary site (here site2) nodes (here server4 and server5). In general, do not give votes to WSFC nodes that reside at a secondary disaster recovery site. You do not want nodes in the secondary site to contribute to a decision to

  take the cluster offline when there is nothing wrong with the primary site.

  References: WSFC Quorum Modes and Voting Configuration (SQL Server)

• Question 266:

  Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012.

  Server1 is the enterprise root certification authority (CA) for contoso.com.

  You need to enable CA role separation on Server1.

  Which tool should you use?

  A. The Certutil command
  B. The Authorization Manager console
  C. The Certsrv command
  D. The Certificates snap-in
  A. The Certutil command

  ---

  To enable role separation Open Command Prompt.

  Type:

  certutil -setreg ca\RoleSeparationEnabled 1

  Etc.

  Reference: Enable role separation

• Question 267:

  You have a server named Server1 that runs Windows Server 2012 R2.

  Server1 has a single volume that is encrypted by using BitLocker Drive Encryption (BitLocker).

  BitLocker is configured to save encryption keys to a Trusted Platform Module (TPM). Server1 is configured to perform a daily system image backup.

  The motherboard on Server1 is upgraded.

  After the upgrade, Windows Server 2012 R2 on Server1 fails to start.

  You need to start the operating system on Server1 as soon as possible.

  What should you do?

  A. Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run the BitLocker Recovery Password Viewer tool.
  B. Start Server1 from the installation media. Run startrec.exe.
  C. Start Server1 from the installation media. Perform a system image recovery.
  D. Start Server1 from the installation media. Run bcdboot.exe.
  A. Move the disk to a server that has a model of the old motherboard. Start the server from the installation media. Run the BitLocker Recovery Password Viewer tool.

  ---

  References: https://support.microsoft.com/en-za/help/928202/how-to-use-the-bitlocker-recovery-password-viewer-for-active-directory

• Question 268:

  You are employed as a network administrator at contoso.com.

  Contoso.com has an active directory domain named contoso.com.

  All servers on the contoso.com network have Windows Server 2012 R2 installed.

  Contoso.com has a server named server1, which is configured as a file server.

  You have been instructed to enable a feature that discovers and eradicates duplication within data without compromising its reliability or accuracy.

  Which of the following actions should you take?

  A. You should considerhaving the Data Deduplication feature enabled.
  B. You should consider having the Storage Spaces feature enabled.
  C. You should consider having the Storage Management feature enabled.
  D. You should consider having the folder redirection feature enabled.
  A. You should considerhaving the Data Deduplication feature enabled.

  ---

  A. Data deduplication involves finding and removing duplication within data without compromising its fidelity or integrity Incorrect Answers:

  

  B: Storage Spaces in Windows Server 2012 R2 and Windows 8 enables cost-effective, optimally used, highly available, scalable, and flexible storage solutions for business-critical (virtual or physical) deployments.

  C: Windows Server 2012 R2 enables storage management that is comprehensive and fully scriptable, and administrators can manage it remotely.

  D: older Redirection lets administrators redirect the path of a folder to a new location.

  References: https://technet.microsoft.com/en-us/library/hh831602.aspx https://technet.microsoft.com/en-us/library/hh831739.aspx https://technet.microsoft.com/en-us/library/hh831751.aspx https://technet.microsoft.com/en-us/library/cc732275.aspx http://blogs.technet.com/b/filecab/archive/2012/05/21/introduction-to-data-deduplication-inwindows-server-2012.aspx

• Question 269:

  You work as an administrator at contoso.com.

  Contoso.com network consists of a single domain named contoso.com.

  All servers on the contoso.com network have Windows Server 2012 R2 installed. Contoso.com has a server, named SERVER1, which has the AD DS, DHCP and DNS server roles installed.

  Contoso.com also has a server named SERVER2, which has the DHCP and Remote Access Server Role installed.

  You have configured a server,which has the File and Storage Services Server role installed.to automatically acquire an IP address.

  The server is named Server3.

  You then create a filter on SERVER1.

  Which of the following is a reason for this configuration?

  A. To make sure that SERVER1 issues Server3 an IP address.
  B. To make sure that SERVER1 does not issue SERVER3 an IP address
  C. To make sure that SERVER3 acquires a constant IP address from SERVER2 only.
  D. To make sure that SERVER3 is configured with a static IP address
  B. To make sure that SERVER1 does not issue SERVER3 an IP address

  ---

  Deny Filter would not allow SERVER1 to issue SERVER3 an IP

  

  Incorrect Answers:

  A: MAC Address Filtering allows the ability to Deny a MAC addresses to be issued a IP from the DHCP server

  C: A DHCP Reservation onSERVER2 would be needed for a constant IP

  D: QUESTION: states it is configured to automatically acquire IP

  References: https://technet.microsoft.com/en-us/library/cc779507(v=ws.10).aspx https://technet.microsoft.com/en-us/library/ee941155(v=ws.10).aspx

• Question 270:

  You are configuring secondary links for the connections between the Melbourne and Sydney sites and between the Melbourne and Adelaide sites. The existing Melbourne to Sydney site link is called MEL-SYD-ALPHA and has a site link cost

  of 100. The existing Melbourne to Adelaide site link is called MEL-ADL-ALPHA and has a site link cost of 100.

  You want the secondary site links to be used only when the existing site links are unavailable.

  The new site links are named MEL-SYD-BETA and MEL-ADL-BETA.

  Which of the following steps should you take to accomplish this goal?

  A. Configure the site link cost for the MEL-SYD-BETA with a value of 110.
  B. Configure thesite link cost for the MEL-ADL-BETA with a value of 110.
  C. Configure the site link cost for the MEL-ADL-BETA with a value of 90.
  D. Configure the site link cost for the MEL-SYD-BETA with a value of 90.
  A. Configure the site link cost for the MEL-SYD-BETA with a value of 110.
  B. Configure thesite link cost for the MEL-ADL-BETA with a value of 110.