Microsoft 70-412 Online Practice Questions and Exam Preparation

Microsoft 70-412 Online Questions & Answers

• Question 281:

  Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the Hyper-V server role and the Failover Clustering feature installed.

  

  You need to replicate virtual machines from Cluster1 to Cluster2.

  Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)

  A. From Hyper-V Manager on a node in Cluster2, create three virtual machines.
  B. From Cluster2, add and configure the Hyper-V Replica Broker role.
  C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
  D. From Cluster1, add and configure the Hyper-V Replica Broker role.
  E. From Hyper-V Manager on a node in Cluster2 modify the Hyper-V settings.
  C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
  D. From Cluster1, add and configure the Hyper-V Replica Broker role.
  E. From Hyper-V Manager on a node in Cluster2 modify the Hyper-V settings.

  ---

  D. You must configure the Hyper-V Replica Broker for cluster1.

  E. We must configure configure the Replica server to receive replication from primary servers:

  In Hyper-V Manager, click Hyper-V Settings in the Actions pane.

  In the Hyper-V Settings dialog, click Replication Configuration.

  In the Details pane, select Enable this computer as a Replica server.

  C. Enable virtual machine replication.

  Once the hosting server is configured for Replica, you can enable replication for each virtual machine that you want to be replicated.

  Reference: Deploy Hyper-V Replica https://technet.microsoft.com/en-us/library/jj134207.aspx

• Question 282:

  Note: This question is part of series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.

  Information and details provided in a question apply only to that question.

  Your network contains one Active Directory forest named contoso.com.

  The forest contains two child domains and six domain controllers.

  The domain controllers are configured as shown in the following table.

  

  You need to replicate users who haven't authenticated against any domain controllers for the last 7 days. What should you use?

  A. Set-ADSite
  B. Set-ADReplicationSite
  C. Set-ADDomain
  D. Set-ADReplicationSiteLink
  E. Set-ADGroup
  F. Set-ADForest
  G. Netdom
  C. Set-ADDomain

  ---

  https://technet.microsoft.com/en-us/library/ee617212.aspx

• Question 283:

  You have an enterprise certification authority (CA) named CA1.

  You have a certificate template named UserAutoEnroll that is based on the User certificate template. Domain users are configured to autoenroll for UserAutoEnroll.

  A user named User1 has an email address defined in Active Directory.

  A user named User2 does not have an email address defined in Active Directory.

  You discover that User1 was issued a certificate based on UserAutoEnroll template automatically.

  A request by user2 for a certificate based on the UserAutoEnroll template fails.

  You need to ensure that all users can autoenroll for certificated based on the UserAutoEnroll template.

  Which setting should you configure from the properties on the UserAutoEnroll certificate template?

  A. Issuance Requirements
  B. Request Handling
  C. Cryptography
  D. Subject Name
  D. Subject Name

  ---

  Template properties - Subject Name tab

  E-mail name. If the E-mail name field is populated in the Active Directory user object, that e-mail name will be used for user accounts. The e-mail name is required for user certificates. If the e-mail name is not populated for a userin AD DS,

  the certificate request by that user will fail.

  References:

  https://technet.microsoft.com/en-us/library/Cc725621(v=WS.10).aspx

• Question 284:

  Your network contains an Active Directory domain named contoso.com. The domain contains three servers named Server1, Server2, and Server3 that run Windows Server 2012 R2. All three servers have the Hyper-V server role installed and

  the Failover Clustering feature installed.

  Server1 and Server2 are nodes in a failover cluster named Cluster1. Several highly available virtual machines run on Cluster1. Cluster1 has the Hyper-V Replica Broker role installed. The Hyper-V Replica Broker currently runs on Server1.

  Server3 currently has no virtual machines.

  You need to configure Cluster1 to be a replica server for Server3 and Server3 to be a replica server for Cluster1.

  Which two tools should you use? (Each correct answer presents part of the solution. Choose two.)

  A. The Hyper-V Manager console connected to Server3
  B. The Failover Cluster Manager console connected to Server3
  C. The Hyper-V Manager console connected to Server1.
  D. The Failover Cluster Manager console connected to Cluster1
  E. The Hyper-V Manager console connected to Server2
  A. The Hyper-V Manager console connected to Server3
  D. The Failover Cluster Manager console connected to Cluster1

  ---

  A. To configure the Replica server [on a server that is not part of a cluster which in this case is Server3]

  1.

  In Hyper-V Manager, click Hyper-V Settings in the Actions pane.

  2.

  In the Hyper-V Settings dialog, click Replication Configuration.

  3.

  In the Details pane, select Enable this computer as a Replica server. Etc.

  D. To configure a Replica server that is part of a failover cluster.

  1.

  In Server Manager, open Failover Cluster Manager.

  2.

  In the left pane, connect to the cluster, and while the cluster name is highlighted, click Roles in the Navigate category of the Details pane.

  3.

  Right-click the role and choose Replication Settings.

  4.

  In the Details pane, select Enable this cluster as a Replica server.

  Reference: Deploy Hyper-V Replica , Step 2: Enable Replication http://technet.microsoft.com/en-us/library/jj134240.aspx

• Question 285:

  You have a server named Server1 that runs Windows Server 2012 R2.

  You modify the properties of a system driver and you restart Server1.

  You discover that Server1 continuously restarts without starting Windows Server 2012 R2.

  You need to start Windows Server 2012 R2 on Server1 in the least amount of time. The solution must minimize the amount of data loss.

  Which Advanced Boot Option should you select?

  A. Repair Your Computer
  B. Last Known Good Configuration (advanced)
  C. Disable Driver Signature Enforcement
  D. Disable automatic restart on system failure
  B. Last Known Good Configuration (advanced)

  ---

  Try using Last Known Good Configuration if you can't start Windows, but it started correctly the last time you turned on the computer. Reference: Using Last Known Good Configuration

• Question 286:

  Your company recently deployed a new Active Directory forest named contoso.com. The forest contains two Active Directory sites named Site1 and Site2. The first domain controller in the forest runs Windows Server 2012 R2.

  You need to force the replication of the SYSVOL folder from Site1 to Site2.

  Which tool should you use?

  A. Active Directory Sites and Services
  B. DFS Management
  C. Repadmin
  D. Dfsrdiag
  D. Dfsrdiag

  ---

  In Windows Server 2012 R2, Windows Server 2008 R2, or Windows Server 2008, you can force replication immediately by using DFS Management, as described in Edit Replication Schedules. You can also force replication by using the Dfsrdiag SyncNow command. You can force polling by using the Dfsrdiag PollAD command.

  Reference: DFS Replication: Frequently Asked Questions (FAQ) http://technet.microsoft.com/en-us/library/cc773238(v=ws.10).aspx#BKMK_072

• Question 287:

  Your network contains an Active Directory domain named contoso.com. The domain contains two member servers named Server1 and Server2. All servers run Windows Server 2012 R2.

  Server1 and Server2 have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Guster1. Cluster1 contains a file server role named FS1 and a generic service role named SVC1. Server1 is

  the preferred node for FS1. Server 2 is the preferred node for SVC1.

  You plan to run a disk maintenance tool on the physical disk used by FS1.

  You need to ensure that running the disk maintenance tool does not cause a failover to occur.

  What should you do before you run the tool?

  A. Run Suspend-ClusterResource.
  B. Run Suspend-ClusterNode.
  C. Run cluster.exe and specify the pause parameter.
  D. Run cluster.exe and specify the offline parameter.
  D. Run cluster.exe and specify the offline parameter.

• Question 288:

  HOTSPOT

  Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The network has the physical sites and TCP/IP subnets configured as shown in the following table.

  

  You have a web application named App1 that is hosted on six separate Web servers. DNS has the host names and IP addresses registered as shown in the following table.

  

  You discover that when users connect to appl.contoso.com, they are connected frequently to a server that is not on their local subnet.

  You need to ensure that when the users connect to appl.contoso.com, they connect to a server on their local subnet. The connections must be distributed across the servers that host appl.contoso.com on their subnet.

  Which two settings should you configure? To answer, select the appropriate two settings in the answer area.

  Hot Area:

  

  

  ---

  DNS Round Robin is a mechanism for choosing an IP address from the list returned by a DNS server so that all clients won't get the same IP address every time. Netmask ordering is a mechanism for further optimizing which IP address is used by attempting to determine the closest result.

  Reference: DNS Round Robin and Destination IP address selection

• Question 289:

  HOTSPOT

  Your company has a primary data center and a disaster recovery data center.

  The network contains an Active Directory domain named contoso.com. The domain contains a server named that runs Windows Server 2012 R2. Server1 is located in the primary data center.

  Server1 has an enterprise root certification authority (CA) for contoso.com.

  You deploy another server named Server2 to the disaster recovery data center.

  You plan to configure Server2 as a secondary certificate revocation list (CRL) distribution point.

  You need to configure Server2 as a CRL distribution point (CDP).

  Which tab should you use to configure the required CDP entry? To answer, select the appropriate tab in the answer area.

  Hot Area:

  

  

  ---

  To configure the CDP and AIA extensions on CA1

  In Server Manager, click Tools and then click Certification Authority.

  In the Certification Authority console tree, right-click corp-CA1-CA, and then click Properties.

  Click the Extensions tab. Ensure that Select extension is set to CRL Distribution Point (CDP), and in the Specify locations from which users can obtain a certificate revocation list (CRL).

  Etc.

  Reference: Configure the CDP and AIA Extensions on CA1

  http://technet.microsoft.com/zh-cn/library/jj125369.aspx

• Question 290:

  Your network contains an Active Directory domain named contoso.com. All domain controllers run Windows Server 2012 R2. The domain contains two domain controllers.

  The domain controllers are configured as shown in the following table.

  

  The Branch site contains a perimeter network.

  For security reasons, client computers in the perimeter network can communicate with client computers in the Branch site only.

  You plan to deploy a new RODC to the perimeter network in the Branch site.

  You need to ensure that the new RODC will be able to replicate from DC10.

  What should you do first on DC10?

  A. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.
  B. Run dcpromo and specify the /createdcaccount parameter
  C. Run the Active Directory Domain Services Configuration Wizard
  D. Create an Active Directory subnet.
  A. Run the Add-ADDSReadOnlyDomainControllerAccount cmdlet.

  ---

  Add-ADDSReadOnlyDomainControllerAccount

  Creates a read-only domain controller (RODC) account that can be used to install an RODC in Active Directory.

  Note:

  Once you have added the RODC account, you can add an RODC to a server computer by using the Install-ADDSDomainController cmdlet with the -ReadOnly Replica switch parameter.

  Example

  Adds a new read-only domain controller (RODC) account to the corp.contoso.com domain using the North America site asthe source site for the replication source domain controller.

  C:\PS>Add-ADDSReadOnlyDomainControllerAccount -DomainControllerAccountName RODC1 -DomainName corp.contoso.com -SiteName NorthAmerica