Cisco 640-916 Online Practice Questions and Exam Preparation

Cisco 640-916 Online Questions & Answers

• Question 11:

  In a Cisco Nexus 7009 switch with three N7K-F248XP-25E modules, what is the minimum number of Fabric-2 modules needed to support full utilization of all the installed ports?

  A. 2
  B. 3
  C. 4
  D. 5
  E. 6
  D. 5

• Question 12:

  An engineer is deploying a Cisco Nexus 1000v into VMWare vSphere using the OVA file. The engineer deployed the VSM virtual machine in vCenter and completed the initial setup script of the VSM. Which two additional configuration steps are needed to implement the 1000V? (Choose two.)

  A. Configure an SVS connection to vCenter in the console of the 1000V.
  B. Add hosts to the distributed virtual switch in vCenter.
  C. Add hosts to the distributed virtual switch in the console of the 1000V.
  D. Add the 1000v as a virtual distributed switch in vCenter.
  E. Configure an SVS connection to vCenter using the vCenter wizard.
  A. Configure an SVS connection to vCenter in the console of the 1000V.
  B. Add hosts to the distributed virtual switch in vCenter.

• Question 13:

  Which configuration elements that are selected during initial setup are unique to Cisco MDS 9000 series Fibre Channel switches? (Choose two.)

  A. Time and Date
  B. Management IP address
  C. Default Zoneset distribution
  D. Enforce password complexity
  E. Default switchport mode F
  C. Default Zoneset distribution
  E. Default switchport mode F

• Question 14:

  What are two purposes of VIFs in Data Center Unified Fabric? (Choose two.)

  A. VIF can be used to virtually present NICs to the operating system
  B. VIF is created when interconnecting Catalyst switches to Nexus switches
  C. FEX modules can be connected to Nexus parent switches through VIF
  D. VIF can be used to directly attach virtual machines with a Unified Computing System
  E. VIF creates multiple switch instances inside a VDC
  A. VIF can be used to virtually present NICs to the operating system
  D. VIF can be used to directly attach virtual machines with a Unified Computing System

• Question 15:

  Which item best describes the STP requirements for Cisco FabricPath?

  A. RPVST must be configured on every Cisco FabricPath VLAN.
  B. RPVST must be configured on every Cisco FabricPath Border interface.
  C. MST must be configured on every Cisco FabricPath VLAN.
  D. MST must be configured on every Cisco FPBI.
  E. STP is required only to resolve border link failures.
  F. STP is not required on Cisco FabricPath interfaces.
  F. STP is not required on Cisco FabricPath interfaces.

• Question 16:

  What option automatically performs an inventory and deep discovery of any subsequently attached equipment, without requiring manual intervention?

  A. UCS Manager
  B. UCS Server
  C. CDP Manager
  D. Enterprise Manager
  A. UCS Manager

• Question 17:

  What is the purpose of the Destination VIF field in the VNTag header?

  A. identify the physical satellite port on a Cisco Nexus 2000 Series fabric extender
  B. identify the virtual satellite port on a Cisco Nexus 2000 Series fabric extender
  C. identify the physical satellite port on a Cisco Nexus 7000 Series Switch
  D. identify the fabric port on a Cisco Nexus 2000 Series fabric extender
  A. identify the physical satellite port on a Cisco Nexus 2000 Series fabric extender

• Question 18:

  Which two are benefits of Cisco Unified Fabric? (Choose two.)

  A. native AES-256 encryption of data in flight
  B. consolidation of LAN and SAN over a common transport
  C. zone port distribution
  D. reduced cabling
  E. SNMPv3 strong authentication
  B. consolidation of LAN and SAN over a common transport
  D. reduced cabling

• Question 19:

  Which three are components of the Cisco Unified Computing System 2104 I/O Module? (Choose three.)

  A. multiplexer
  B. chassis management console
  C. chassis management switch
  D. finite state machine
  E. chassis management controller
  A. multiplexer
  C. chassis management switch
  E. chassis management controller

• Question 20:

  What is the purpose of Fibre Channel over Ethernet?

  A. FCoE maps Fibre Channel onto Layer 2 Ethernet, Converging IP, and storage networks.
  B. FCoE encapsulates native Fiber Channel traffic inside iSCSI packets.
  C. FCoE encapsulates native Fiber Channel traffic inside GRE tunnels.
  D. Data Center Bridging uses FCoE to transport IP traffic over native Fiber Channel.
  E. FCoE encapsulates Native Fiber Channel inside IP packets.
  A. FCoE maps Fibre Channel onto Layer 2 Ethernet, Converging IP, and storage networks.