Cisco 500-171 Online Practice Questions and Exam Preparation

Cisco 500-171 Online Questions & Answers

• Question 31:

  Which two are true about Fabric Interconnect L1 and L2 ports in cluster mode? (Choose two)

  A. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
  B. Ports are primarily used for management traffic, but can be used for data traffic as well
  C. Fabric Interconnect ports L1 and L2 are 10 Gb links
  D. Ports can only run as a port channel
  E. Ports can only run as individual links
  F. Ports can run as a port channel or as individual links
  A. Fabric Interconnects connected via L1/L2 have to be the same model except during the upgrade
  D. Ports can only run as a port channel

• Question 32:

  There are 2 chassis tied to a pair of Fabric Interconnects. First chassis, chassis-1, has 1 link between single IOM and Fabric Module. Second chassis, chassis-4, has 4 links between single IOM and Fabric Module. Chassis discovery policy is set for 2 links. Which statement is true?

  A. Both chassis will be added to UCS Domain utilizing all links. No additional steps needed.
  B. Both chassis will be added to UCS Domain utilizing all links only after performing chassis acknowledgment.
  C. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating and no additional steps needed.
  D. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.
  D. Chassis-1 will not be added to UCS Domain. Chassis-4 will be added to UCS domain with all 4 links operating after chassis acknowledgement.

• Question 33:

  Which two are characteristics of a Fibre Channel SAN data LIF? (Choose two.)

  A. It can be associated with a Fibre Channel port.
  B. It can be associated with a WWPN.
  C. It can be associated with an Ethernet port or VLAN interface.
  D. It can be associated with an interface group (ifgrp).
  E. It can be associated with an IP address.
  F. It is associated with the administrative Vserver.
  G. It is associated with the management LIF.
  A. It can be associated with a Fibre Channel port.
  B. It can be associated with a WWPN.

• Question 34:

  When creating a virtual machine in VMware vSphere 5.x, which type of virtual disk should be provisioned if you would like to fully pre-allocate storage with the highest chance of being contiguous?

  A. Thick Provision Lazy Zeroed
  B. Thin Provision
  C. Full Provision
  D. Thick Provision Eager Zeroed
  D. Thick Provision Eager Zeroed

• Question 35:

  Which three are characteristics of a NAS data LIF? (Choose three.)

  A. It can be associated with a Fibre Channel port.
  B. It can be associated with a WWPN
  C. It can be associated with an Ethernet port or VLAN interface.
  D. It can be associated with an interface group (ifgrp).
  E. It can be associated with an IP address.
  F. It is associated with the administrative Vserver.
  G. It is associated with the management LIF.
  C. It can be associated with an Ethernet port or VLAN interface.
  D. It can be associated with an interface group (ifgrp).
  E. It can be associated with an IP address.

• Question 36:

  What management solution can provision all three components of a FlexPod (NetApp storage, Cisco UCS compute and Cisco Nexus network)?

  A. Cisco UCS Central
  B. Cisco FlexPod Manager
  C. NetApp OnCommand Insight
  D. Cisco UCS Director
  E. NetApp FlexPod Manager
  D. Cisco UCS Director

• Question 37:

  Where are log files located on a NetApp node?

  A. /mroot/etc/crash/
  B. /log/core/
  C. /letc/log/crash
  D. /etc/mlog/
  E. /mroot/etc/log/mlog/
  E. /mroot/etc/log/mlog/

• Question 38:

  With Clustered Data ONTAP, which three protocols are supported for host boot in a UCS stateless computing environment in the FlexPod configuration? (Choose three.)

  A. CIFS
  B. FC
  C. FCIP
  D. FCoE
  E. iFCP
  F. iSCSI
  G. NFS
  B. FC
  D. FCoE
  F. iSCSI

• Question 39:

  Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)

  A. cluster LIF
  B. data LIF of protocol CIFS
  C. data LIF of protocol FCoE
  D. data LIF of protocol iSCSI
  E. data LIF of protocol NFS
  F. intercluster LIF
  G. node management LIF
  B. data LIF of protocol CIFS
  E. data LIF of protocol NFS

• Question 40:

  Which policy detail should be set if you want a server to be exempt from all power capping?

  A. Create a Power Control Policy and set Power Capping to No Cap
  B. Create a Power Control Policy select cap and set the priority to 1
  C. Create a Power Group with the appropriate chassis and set the Group Budget Power Cap (W) to 0.
  D. The UCS Power Cap feature should not be utilized in a FlexPod environment.
  A. Create a Power Control Policy and set Power Capping to No Cap