Cisco 500-007 Online Practice Questions and Exam Preparation

Cisco 500-007 Online Questions & Answers

• Question 21:

  How should you configure the IP address and default gateway on a Cisco TelePresence MCU 5300 Series device during setup?

  A. Connect an Ethernet cable to the second Ethernet port of the MCU, and point your web browser to 192.168.2.2.
  B. Console into the serial port in the front panel, and use the static command.
  C. Use the arrows next to the LCD in the front to change the IP address, subnet mask, and default gateway.
  D. Change it from the Cisco VCS.
  B. Console into the serial port in the front panel, and use the static command.

• Question 22:

  If an auto attendant has a numeric ID of 543 and the Cisco TelePresence MCU has a prefix of 62 and a domain of cisco.demo, which two of these will be registered on the Cisco TelePresence VCS, assuming that SIP and H.323 registration have been selected? (Choose two.)

  A. 62543
  B. [email protected]
  C. 543
  D. [email protected]
  E. [email protected]
  A. 62543
  B. [email protected]

• Question 23:

  Which statement is true when H.323 and SIP interworking is set to on in the Cisco TelePresence VCS?

  A. The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the endpoints is locally registered.
  B. The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway only if one of the endpoints is locally registered.
  C. The Cisco TelePresence VCS will not act as a SIP-to-H.323 gateway.
  D. The Cisco TelePresence VCS will permit all traffic from any H.323 or SIP endpoint that is registered locally.
  A. The Cisco TelePresence VCS will act as a SIP-to-H.323 gateway regardless of whether one of the endpoints is locally registered.

• Question 24:

  Refer to the exhibit. Exhibit:

  

  Which two letters represent input connections on the Cisco TelePresence Codec C90? (Choose two.)

  A. A
  B. B
  C. C
  D. D
  E. E
  A. A
  D. D

• Question 25:

  Where would you enter release and option keys into the Cisco TelePresence Management Suite?

  A. in Configuration > General Settings
  B. on the portal page
  C. through the release key generator in a terminal session on the server
  D. on the Cisco TelePresence Manager Suite server maintenance page
  A. in Configuration > General Settings

• Question 26:

  How does an administrator move an endpoint efficiently from one conference to another on a Cisco TelePresence MCU?

  A. From the Move Participants screen, right-click the participant and select the new conference from the drop-down list.
  B. From the Move Participants screen, drag and drop a participant from one conference to another.
  C. From the Conference menu, select the participant, and then select the new conference
  D. From the web interface, disconnect the participant, and then reconnect manually to the new conference.
  B. From the Move Participants screen, drag and drop a participant from one conference to another.

• Question 27:

  If the zones in a VCS firewall traversal solution are established, what else is needed before connections can be established in both directions?

  A. A call policy must be established
  B. VCS search rules must be created for each zone.
  C. The VCS control and the VCS expressway must be neighbored.
  D. Transforms must be created in the VCS traversal server zone.
  B. VCS search rules must be created for each zone.

• Question 28:

  Which of these options shows the methods that are available to configure a Cisco VCS appliance at initial installation?

  A. CLI over serial port, web interface, keyboard and monitor
  B. CLI over serial port, web interface, LCD panel
  C. CLI over serial port, web interface, boot disk
  D. using the Cisco Prime Collaboration Manager, after running 'system discovery' to discover the newly added Cisco VCS
  B. CLI over serial port, web interface, LCD panel

• Question 29:

  In the SIP configuration, which two items need to match in the Cisco TelePresence VCS configuration and the endpoint configuration? (Choose two.)

  A. service prefix
  B. Cisco VCS IP address
  C. DNS server
  D. SIP domain
  B. Cisco VCS IP address
  D. SIP domain

• Question 30:

  What is the maximum port capacity of the 5320 MCU?

  A. 5 HD+ or 10 HD or 20 SD or 24 nHD
  B. 1 HD+ or 2 HD or 4 SD or 8 nHD
  C. 10 HD+ or 20 HD or 40 SD or 48 nHD
  D. 20 HD+ or 40 HD or 80 SD or 96 nHD
  C. 10 HD+ or 20 HD or 40 SD or 48 nHD