Cisco 500-007 Online Practice Questions and Exam Preparation

Cisco 500-007 Online Questions & Answers

• Question 1:

  Which two of these can be found by navigating to TCS Diagnostic > Server Overview in the Cisco TCS web interface? (Choose two.)

  A. option key information
  B. recording port activity status
  C. Cisco VCS registration status
  D. which Cisco TMS is managing the TCS
  A. option key information
  B. recording port activity status

• Question 2:

  What are two ways that a conference participant can be disconnected from a conference? (Choose two.)

  A. by using the MCU 5300 web interface
  B. will be automatically disconnected at the end of the allotted time
  C. by the auto attendant
  D. will be disconnected when the conference exceeds its maximum capacity
  A. by using the MCU 5300 web interface
  B. will be automatically disconnected at the end of the allotted time

• Question 3:

  Which command is used to set the IP configuration for a Cisco TelePresence MCU 5300?

  A. status IP address netmask default GW
  B. xconfigure IP address netmask default GW
  C. static A IP address netmask default GW
  D. set IP address netmask default GW DNS server address
  C. static A IP address netmask default GW

• Question 4:

  Which statement is true regarding passwords on a Cisco TelePresence MX, EX, C Series, or SX20 device?

  A. The device ships from factory with the admin account enabled, with no password.
  B. The device ships from factory with the admin account enabled, with a default password of CISCO.
  C. The device ships from factory with the admin account enabled, with a default password of TANDBERG.
  D. The device ships from factory with the root account enabled, with no password.
  A. The device ships from factory with the admin account enabled, with no password.

• Question 5:

  Which two statements about the Cisco TCS are correct? (Choose two.)

  A. It contains an internal gatekeeper.
  B. It allows creators to edit videos.
  C. It runs on the Windows operating system.
  D. It runs on the Linux operating system.
  B. It allows creators to edit videos.
  C. It runs on the Windows operating system.

• Question 6:

  Which type of account needs to be set up to create a Cisco TelePresence soft client (such as Cisco Jabber or Movi) user if you are using the Cisco TelePresence VCS Expressway Starter Pack?

  A. a local FindMe account on the Cisco VCS
  B. a local admin account on the Cisco VCS
  C. an LDAP user account on Active Directory
  D. an LDAP FindMe account on Active Directory
  A. a local FindMe account on the Cisco VCS

• Question 7:

  What are the two methods for pairing an 8-inch Cisco TelePresence Touch panel to a Codec C90? (Choose two.)

  A. Plug the cable that is attached to the Touch panel directly into the back of the Codec C90.
  B. Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90.
  C. Plug the provided Ethernet cable from the Touch panel power supply into the LAN and pair over the network.
  D. Use the built-in wireless on the Touch panel to pair over the network.
  B. Plug the provided Ethernet cable from the Touch panel power supply into the second Ethernet port on the Codec C90.
  C. Plug the provided Ethernet cable from the Touch panel power supply into the LAN and pair over the network.

• Question 8:

  You have configured your Cisco TelePresence Codec C90 but discover unwanted noise during use. What best practice will help avoid this problem?

  A. Connect only one device at a time to an input and avoid daisy-chaining.
  B. Recycle the power on your system after adding each additional input.
  C. If you are not using an input, turn it off.
  D. Daisy-chain additional devices using a serial cable to provide separate power supplies.
  C. If you are not using an input, turn it off.

• Question 9:

  How do you upgrade the software of an existing installation with a Cisco TelePresence MCU 5300?

  A. Download the new software, navigate to Maintenance > Upgrade Software, and upload the software.
  B. Use FTP to access the MCU, browse to the /etc/software/upgrade directory, put the new load in, and reboot the MCU.
  C. Navigate to Settings > Upgrade, then follow instructions under Main Software Image.
  D. Use an SFTP client to log in to the MCU, and place the software in the /etc/software/upgrade directory.
  C. Navigate to Settings > Upgrade, then follow instructions under Main Software Image.

• Question 10:

  What is one way that a conference participant's screen layout be changed without affecting other participants?

  A. via the participant settings in the MCU 5300 web interface
  B. via the conference settings in the MCU 5300 web interface
  C. by the nominated chair endpoint using FECC
  D. by moving the participant into a different meeting using the MCU 5300 web interface
  A. via the participant settings in the MCU 5300 web interface