Nokia 4A0-108 Online Practice Questions and Exam Preparation

Nokia 4A0-108 Online Questions & Answers

• Question 241:

  What is the signaling protocol used by a multicast receiver?

  A. IGMP
  B. PIM
  C. PIM or IGMP
  D. PIM and IGMP are both used by a multicast receiver
  E. BSM
  A. IGMP

• Question 242:

  Which of the following statements is true regarding BSR and RP?

  A. The same router cannot be configured as a BSR candidate and as a static RP
  B. The same router cannot be a candidate-RP and a BSR-candidate at the same time
  C. There is only one active RP in a multicast routing domain at anytime
  D. There is only one elected BSR in a multicast routing domain at anytime
  D. There is only one elected BSR in a multicast routing domain at anytime

• Question 243:

  What will be the immediate action of the last hop router on receipt of an IGMP version 2 leave message?

  A. It will send a PIM (*, G) prune to the RP
  B. It will send a PIM (S, G) prune to the source
  C. It will send a PIM (*, G) prune to the RP and a PIM (S, G) prune to the source
  D. It will issue an IGMP Group Specific Query
  E. It will issue an IGMP General Query
  D. It will issue an IGMP Group Specific Query

• Question 244:

  How many responses are received when a router sends an IGMP version 2 query to a specific multicast group with 6 active receivers on the local broadcast domain?

  A. 1
  B. 2
  C. 6
  D. 7
  A. 1

• Question 245:

  Refer to the exhibit.

  

  According to the PIM configuration on SR-3, can the receiver in the diagram receive multicast traffic from the source for group FF70:340:2001::1000? Assume all the other configurations are correct.

  A. Yes. The configuration of PIM is correct and the receiver should get traffic from the source
  B. No. The configuration of PIM is no problem, but the scope of the group address used to send traffic is wrong
  C. No. As the "rpf6-table" command is missing
  D. No. As the embedded-rp group-range is wrong
  B. No. The configuration of PIM is no problem, but the scope of the group address used to send traffic is wrong

• Question 246:

  What is the destination address of the MLDv2 report message?

  A. FF02::1
  B. FF02::2
  C. FF02::16
  D. The specific multicast group address that the host is interested in.
  C. FF02::16

• Question 247:

  Which of the following best describes how S-PMSI construction is initiated in Draft Rosen?

  A. The ingress PE sends an MDT Join TLV in the I-PMSI for a group address from the configured range.
  B. The egress PE sends an MDT Join TLV in the I-PMSI for a group address from the configured range.
  C. The ingress PE sends a PIM Join in the I-PMSI for a group address from the configured range.
  D. The egress PE sends a PIM Join in the I-PMSI for a group address from the configured range.
  A. The ingress PE sends an MDT Join TLV in the I-PMSI for a group address from the configured range.