Cisco 400-201 Online Practice Questions and Exam Preparation

Cisco 400-201 Online Questions & Answers

• Question 141:

  Which component is a correct G.8032 RPL type/node?

  A. RPL peer node
  B. RPL owner node
  C. RPL uplink node
  D. RPL next-peer node
  B. RPL owner node

• Question 142:

  Select the three valid LMI extension:

  A. Multicasting
  B. Global addressing
  C. Forward-explicit congestion notification (FECN)
  D. Virtual circuit status messages.
  E. Backward-explicit congestion notification (BECN)
  A. Multicasting
  B. Global addressing
  D. Virtual circuit status messages.

• Question 143:

  SNMPv3 provides which three security features?(Choose three)

  A. DES 56-bit encryption
  B. Encrypted user password
  C. Private community information that is exchanged out-of-band
  D. Device hostname that is authenticated via AES algorithm
  E. Message integrity
  F. Authentication that is based on MD5 or SHA algorithms
  A. DES 56-bit encryption
  E. Message integrity
  F. Authentication that is based on MD5 or SHA algorithms

• Question 144:

  Refer to the exhibit.

  

  An ISP network runs L3VPN MPLS over the IP core to deliver internet service for the customer as a central service through a dedicated VRF.

  Which route target plan delivers the internet service to customers while preserving customer VRF privacy?

  A. vrf definition CUST-1 route-target export 100:2 route-target import 100:2 ! vrf definition CUST-2 route-target export 100:1 route-target import 100:1 ! vrf definition INTERNET route-target export 100:1 route-target import 100:2
  B. vrf definition CUST-1 route-target export 100:3 route-target import 100:3 ! vrf definition CUST-2 route-target export 100:3 route-target import 100:3 ! vrf definition INTERNET route-target export 100:1 route-target import 100:2
  C. vrf definition CUST-1 route-target export 100:3 ! vrf definition CUST-2 route-target export 100:3 ! vrf definition INTERNET route-target import 100:1 route-target import 100:2
  D. vrf definition CUST-1 route-target import 100:3 ! vrf definition CUST-2 route-target import 100:3 ! vrf definition INTERNET route-target import 100:1 route-target import 100:2
  D. vrf definition CUST-1 route-target import 100:3 ! vrf definition CUST-2 route-target import 100:3 ! vrf definition INTERNET route-target import 100:1 route-target import 100:2

• Question 145:

  Which three SNMP features are supported only on SNMP version 3? (Choose three.)

  A. 64-bit counter
  B. authentication
  C. privacy (encryption)
  D. textual convention
  E. GET BULK operation
  F. inform operation
  G. authorization and access controls
  B. authentication
  C. privacy (encryption)
  G. authorization and access controls

• Question 146:

  Two router that run LotherDP have multiple links that connect them to each. Which configuration ensure that the label bindings are not flushed from the LIB if one of the links fails?

  A. The MPLS LDP sync command under router process configuration mode
  B. The mpls ldp autoconfig command
  C. The mpls ip command on an MPLS TE tunnel
  D. The mpls ldp discovery targeted-hello accept command
  A. The MPLS LDP sync command under router process configuration mode

• Question 147:

  Which version of IGMP is required for source specific multicast implementations?

  A. IGMP version 2
  B. Cisco group management protocol
  C. IGMP version 3
  D. IGMP version 1
  C. IGMP version 3

• Question 148:

  Refer to the exhibit.

  

  Which two statements are true? ( Choose two)

  A. This router has the ip multicast longest-match command applied
  B. This router is forwarding the multicast traffic to the Ethernet 0/0 interface
  C. This router runs multicast with default multicast commands
  D. This router cannot have MP-BGP safi 2 address-family configured
  E. This router uses route 10.1.1.0/24 toward the source to fulfill the multicast RPF requirements
  A. This router has the ip multicast longest-match command applied
  E. This router uses route 10.1.1.0/24 toward the source to fulfill the multicast RPF requirements

• Question 149:

  Packed Cell Relay encapsulation with AToM includes which of the following? (Choose four.)

  A. Tunnel label
  B. VC-label
  C. 5-byte ATM header
  D. Payload
  E. 4 byte ATM header
  F. Support for 30 packed cells.
  A. Tunnel label
  B. VC-label
  D. Payload
  E. 4 byte ATM header

• Question 150:

  A service provider requires that the PE-CE link must be optimized by only compressing the TCP header regards to Business traffic policy neither voice traffic nor other traffic policies must be compressed. Which solution meets these requirements?

  A. header compression using IPHC profiles
  B. enhanced RTP header compression
  C. class-based TCP header compression
  D. RTP header compression over satellite links
  A. header compression using IPHC profiles