Cisco 400-151 Online Practice Questions and Exam Preparation

Cisco 400-151 Online Questions & Answers

• Question 131:

  Which three LSA types are valid for OSPFv2? (Choose three.)

  A. Backbone Summary: an LSA sent by the backbone router to all the OSPF areas.
  B. Default LSA: an LSA generated by the ASBR. These LSAs are used to propagate default route into OSPF.
  C. DR Summary LSA: an LSA sent by the DR router to all the other routers on network.
  D. As Internal LSA: an LSA generated by the ASBR. AS Internal LSAs are flooded only within the autonomous system.
  E. Router LSA: an LSA sent by every router. This LSA includes the state the cost of all links and a list of all OSPFv2 neighbors on the link.
  F. Opaque LSA: an LSA used to extend OSPF.
  G. Network LSA: an LSA sent by the DR. This LSA lists all routers in the multi-access network.
  E. Router LSA: an LSA sent by every router. This LSA includes the state the cost of all links and a list of all OSPFv2 neighbors on the link.
  F. Opaque LSA: an LSA used to extend OSPF.
  G. Network LSA: an LSA sent by the DR. This LSA lists all routers in the multi-access network.

• Question 132:

  

  Refer to the exhibit. Which command on a Cisco UCS provides this output?

  A. show npv status
  B. show npv info
  C. show npv traffic-map
  D. show npv external-interface-usage
  A. show npv status

• Question 133:

  Refer to the exhibit.

  

  Which two statements about this configuration command sequence with regards to the Cisco Nexus 5500 are true? (Choose two.)

  A. It reserves this FCID so only this node can use this FCID when communicating with other Fiber Channel entities.
  B. It configures this node to use FCID 0EFC2A to forward the FDISC to when an endpoint is connected.
  C. It configures this node to use 0EFC2A as the last 3bytes of the FPMA.
  D. It permits this node to form FCoE ISLs only with other nodes configured for the same FC-MAP.
  E. It configures this node to use 0EFC2A as the first 3 bytes of the FPMA.
  B. It configures this node to use FCID 0EFC2A to forward the FDISC to when an endpoint is connected.
  E. It configures this node to use 0EFC2A as the first 3 bytes of the FPMA.

• Question 134:

  Which two statements about the configuration of APIC controllers in the ACI Fabric are true? (Choose two.)

  A. Commissioning an APIC can be done via the APIC UI, but decommissioning an APIC must be done using the CLI.
  B. Cluster controllers added to the APIC must be running the same version of firmware.
  C. An APIC cluster is comprised of multiple controllers that provide monitoring, diagnostic, and configuration capability.
  D. When performing planned changes to the cluster, at least one controller in the cluster must be healthy.
  E. APIC cluster size is set during the initial setup script, and after it is configured it requires a nondisruptive re-initialization of the APIC cluster to change.
  B. Cluster controllers added to the APIC must be running the same version of firmware.
  C. An APIC cluster is comprised of multiple controllers that provide monitoring, diagnostic, and configuration capability.

• Question 135:

  Object configJob contains which of the following information?

  A. passphrase
  B. field lastStepDescr
  C. next object name
  D. admin state
  B. field lastStepDescr

• Question 136:

  What best describes the difference between Automation and Orchestration?

  A. Automation refers to an automatic process for completing a single task and Orchestration refers to assembling and coordinating a set of tasks and conditions.
  B. Automation refers to an automatic process for completing multiple tasks with conditions and Orchestration refers to executing tasks in parallel.
  C. Automation refers to scripting languages (Python, Ansible, etc) and Orchestration refers to commercial products that control configuration deployment.
  D. Automation describes a hands-off configuration process while Orchestration refers to sets of automation tasks that require the network administrator to coordinate.
  A. Automation refers to an automatic process for completing a single task and Orchestration refers to assembling and coordinating a set of tasks and conditions.

• Question 137:

  Which three statements about ASM and SSM are correct? (Choose three.)

  A. By default, the SSM group range for PIM is 232.0.0.0/8 and for PIM6 is FF3x/96.
  B. PIM ASM is not fully supported on a vPC.
  C. In ASM mode, only the last-hop router switches from the shared tree to theSPT.
  D. ASM mode requires that you configure an RP.
  E. If you want to use the default SSM group range, you must configure the SSM group range.
  A. By default, the SSM group range for PIM is 232.0.0.0/8 and for PIM6 is FF3x/96.
  C. In ASM mode, only the last-hop router switches from the shared tree to theSPT.
  D. ASM mode requires that you configure an RP.

• Question 138:

  Refer to the exhibit. This cobra code extract is expected to create a BD object. Assume that fvTenantmo has been populated with the correct tenant object and all module prerequisites have been met. Which statement is true?

  

  A. The BD is bd.
  B. The BD name is kept in the dictionary tenant.
  C. The BD name is name.
  D. The code does not work because you also must import module fvTenantMo.
  B. The BD name is kept in the dictionary tenant.

• Question 139:

  Which email format is supported in Callhome feature in ACI?

  A. xml
  B. json
  C. https
  D. mapi
  A. xml

• Question 140:

  In which default state are all Cisco UCS Fabric Interconnect Ethernet ports configured?

  A. uplink port
  B. unconfigured port
  C. disabled port
  D. trunk port
  E. access port
  B. unconfigured port