An architect is designing a new vSphere environment to meet the following requirements:
The environment must support 5,000 virtual machines.
The environment will be built initially using 350 hosts.
Which vCenter Server appliance deployment size should the architect specify for the design?
A. LargeWhich requirement would be classified as a functional requirement within the design documentation?
A. The system must perform virtual machine backups through an API.A new real-time financial service application is being developed by the engineering team at a financial firm and will be released as a public Software-as-a-Service (SaaS) offering. The solutions architect has designed and deployed a new vSphere environment and the supporting network infrastructure for hosting all public services. ESXi hosts are configured to use Precision Time Protocol (PTP) and a local stratum-1 network time server. Application provisioning and scaling will be managed by VMware vRealize Automation and can be run on Microsoft Windows or multiple distributions of Linux.
Which three recommendations should the architect include in the design to ensure that the service maintain timekeeping within an accuracy of one second? (Choose three.)
A. Use Microsoft Windows Server as the guest operating system.During a requirements gathering workshop, the customer provides the following information:
Each host has 2 × 10 GbE NIC EtherChannel is not currently configured No changes can be made to the physical network Network throughput must be prioritized for defined critical services
Which two recommendations should the architect make with regard to virtual networking? (Choose two.)
A. Use Route Based on Physical NIC Load.A VMware Service Provider is tasked with delivering a solution for continuous availability for a subset of Tier 1 virtual machines (VMs) and vApps running in their vSAN environment. The VMs make up a mission-critical application and there
can be no data loss in the event of an outage at their primary data center. In the event of a regional outage, they have established a 10-minute recovery point objective (RPO). Failover/failback to the third site must be automated.
They have the following in place:
Two local data centers (primary and secondary) connected with 100 Gb dedicated fiber
-2ms round-trip time (RTT) latency between the sites A third data center located on another power grid
-70ms latency between the primary and secondary data centers Matching storage arrays at all locations
Which two solutions could be used to meet the requirements? (Choose two.)
A. Site Recovery ManagerAn architect is tasked with designing a new VMware software-defined data center (SDDC) using VMware vSAN. The architect uses a storage assessment tool to determine the storage requirements for the new vSAN cluster. The new SDDC
is going to be deployed into the existing data center and must be connected to a shared core network switch.
The architect decides to use vSAN ReadyNodes with the following configuration:
Two disk groups with:
-Write Intensive NVMe 800 GB drive for cache
-Four 3.84 TB Mixed Use NVMe for capacity Four 10 GbE ports
Which element represents a risk that should be included in this design?
A. The number of 10 GbE capable ports in the vSAN ReadyNodeAn architect is designing a VMware solution for a customer to meet the following requirements:
The solution must use investments in existing storage array that supports both block and file storage.
The solution must support the ability to migrate workloads between hosts within a cluster.
The solution must support resource management priorities.
The solution must support the ability to connect virtual machines directly to LUNs.
The solution should use existing 32G fabric infrastructure.
There is no budget for additional physical hardware.
Which design decision should the architect make to meet these requirements?
A. The ESXi hosts will leverage Fibre Channel (FC).Which requirement would be classified as a functional requirement within the application design documentation?
A. The application must be hosted with redundancy levels of N+1 or better.Following a recent acquisition, the architect learns that both companies use vSphere on-premise and will need to combine the data centers into one. The acquired company's licenses will not be renewed for cost-savings related to the acquisition. All consumed vSphere licenses must have active support to support line-of-business operations. The merged environment must maintain 25% spare capacity. The architect has a small budget remaining unallocated for hardware.
The architect has calculated that the current vSphere environment can absorb the acquired company's virtual machines but the cluster will run at 90% memory utilization and at 50% CPU utilization.
Which design decision can the architect make to incorporate the new company's virtual machines into the combined vSphere environment?
A. Migrate the acquired company's virtual machines into the vSphere environment as it will currently fit.An architect is considering placement of virtual machines within an existing VMware software-defined data center (SDDC).
During the discovery phase, the following information is documented:
Cluster One Six ESXi hosts vSphere HA with host failures cluster tolerates = 1 Proactive HA is enabled and set to automated Fully Automated vSphere DRS Transparent Page Sharing (TPS) is enabled
Cluster Two Eight ESXi hosts vSphere HA with host failures cluster tolerates = 1 Proactive HA is disabled Partially Automated vSphere DRS Transparent Page Sharing (TPS) is disabled
Cluster Three Three ESXi hosts vSphere HA with admission control is disabled Proactive HA is not supported Transparent Page Sharing (TPS) is disabled
Virtual Machine Resource Profile 1 Memory sharing techniques should not be used Virtual machines should be automatically restarted in the event of host failure if resources are available Automated initial virtual machine placement
Virtual Machine Resource Profile 2 Memory sharing techniques can be used Virtual machines should be protected from any host hardware failures Automated initial virtual machine placement
Which two recommendations should the architect make for placement of the virtual machines to meet resource profile requirements? (Choose two.)
A. All virtual machines matching Virtual Machine Resource Profile 2 should be placed on Cluster One.Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only VMware exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 3V0-21.21 exam preparations and VMware certification application, do not hesitate to visit our Vcedump.com to find your solutions here.