352-011 Exam Details

  • Exam Code
    :352-011
  • Exam Name
    :Cisco Certified Design Expert Practical
  • Certification
    :Cisco Certifications
  • Vendor
    :Cisco
  • Total Questions
    :249 Q&As
  • Last Updated
    :Jul 11, 2026

Cisco 352-011 Online Questions & Answers

  • Question 41:

    A customer requests that you determine how much of their remote branch traffic into a central data center is related to a call manager that resides in the data center. Which solution do you recommend?

    A. Enable NetFLow on branch routers
    B. Enable netFlow on central data center routers
    C. Perform SNMP polling of central data center routers
    D. Perform SNMP polling of branch routers
    E. Create an ACL on the local call manager switch with logging enabled
    F. Span traffic from the switch port on the call manager to a data analyzer

  • Question 42:

    Which two statements regarding to QoS marking are true? (Choose two)

    A. Shaping is one of the ways that packets can be remarked
    B. Class-based marking occurs after packet classification
    C. 802.1Q/p CoS bits and IP Precedence are both layer 3 marking fields
    D. QoS marking establishes a trust boundary that scheduling tools depend on
    E. MPLS EXP and DSCP are both layer 2 marking fields

  • Question 43:

    You are designing a traffic monitoring and analysis system for a customer. Which traffic monitoring technique would you recommend to place the amount of burden on the network infrastructure?

    A. SPAN monitor ports
    B. passive taps
    C. IP NBAR
    D. NetFlow

  • Question 44:

    There is an MPLS-enabled link constantly flapping on an MPLS VPN network. Given that the network runs OSPF as the IGP protocol, which design mechanism will stabilize the network and avoid constant re-convergence?

    A. IP Event Dampening
    B. OSPF fast hellos
    C. IP SLA
    D. Partial SPF

  • Question 45:

    Refer to the exhibit.

    This layer 2 network is expected to add 150 VLANS over the next year, In addition to the existing 50 VLANs within the network which STP types will support this design requirement the least amount of CPU resource and achieving load balancing?

    A. PVST+
    B. CST
    C. MST
    D. RSTP

  • Question 46:

    Refer to the exhibit.

    You are designing a data center migration from one location to another, which requires all existing VLANs spanned to the new data center to maintain host IP addressing. Two temporary Gigabit Ethernet circuits are available to extend the VLANs at Layer 2 to the location as trunk links between core switches in each location. Which solution provides maximum fault isolation between the two data centers to ensure a Layer Issue in one data center does not affect the other during the migration?

    A. Perform BPDU filtering over the trunk links
    B. Enable STP PortFast on host ports within each data center
    C. Run the dual links as multichassis Etherchannel trunk between core switches within each location
    D. Perform HSRP filtering over the trunk links to maintain active HSRP gateways within each data center for each VLAN

  • Question 47:

    A Company has these requirements for access to their wireless and wired corporate LANs using 802.1x

    Clients devices that corporate assets and have joined the active directory domain are allowed access

    Personal devices must be not allowed access

    Clients and access servers must be mutually authenticated.

    Which solution meets these requirements?

    A. Protected EAP/Microsoft CHAP v2 with user authentication
    B. EAP-TLS with machine authentication
    C. EAP-TLS with user authentication
    D. Protected EAP/Microsoft CHAP v2 with Machine authentication

  • Question 48:

    DRAG DROP

    A small local business recently had an outage after an employee plugged a switch into the corporate network, which caused the traffic pattern in the network to change. You have been tasked to redesign the network so that this does not happen again. From the left side to the right side, drag the PVRST+ features that should be implemented to prevent the corresponding root cause. Not all sources will be used.

    Select and Place:

  • Question 49:

    You are presented with requirements to design a development, testing and production environments. These environment should communicate with each other, yet they should be kept as separate failure domains. Which routing protocol should be configured on the links between the networks to support the design requirements?

    A. OSPF
    B. EIGRP
    C. IS-IS
    D. BGP

  • Question 50:

    How can EIGRP topologies be designed to converge as fast as possible in the event of a point-to-point link failure?

    A. Build neighbor adjacencies in a triangulated fashion
    B. Build neighbor adjacencies in a squared fashion
    C. Limit the query domain by use of distribute lists
    D. Limit the query domain b use of summarization
    E. Limit the query domain by use of default routes

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 352-011 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.