Cisco 350-801 Online Practice Questions and Exam Preparation

Cisco 350-801 Online Questions & Answers

• Question 501:

  An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android).

  How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

  A. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.
  B. Deploy jabber-config-user.xml on iOS and Android devices.
  C. Upload the jabber-config.enc file to TFTP
  D. Create a user profile in Jabber Policies.
  A. Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.

• Question 502:

  What are two functions of a dial-plan? (Choose two.)

  A. call recording
  B. endpoint features
  C. calling privileges
  D. digit manipulation
  E. ring cadence
  C. calling privileges
  D. digit manipulation

  ---

  Explanation

  References:

  https://www.ciscopress.com/articles/article.asp?p=1715059&seqNum=2

• Question 503:

  Refer to the exhibit.

  

  An engineer must modify the existing QoS policy-map statement to implement LLQ for voice traffic.

  Which change must engineer make in the configuration?

  A. bandwidth 170 to percent 170
  B. bandwidth 170 to reserve 170
  C. bandwidth 170 to priority 170
  D. bandwidth 170 to LLQ 170
  C. bandwidth 170 to priority 170

• Question 504:

  Which Unity Connection feature is directly associated with turning a phone message lamp on or off when voicemail state changes?

  A. MWI
  B. SRTP
  C. FAC
  D. LLDP
  A. MWI

  ---

  Explanation

  MWI is correct because Message Waiting Indicator functionality controls the phone lamp or message status notification based on voicemail conditions. SRTP secures media, FAC controls call authorization, and LLDP is a Layer 2 discovery protocol.

• Question 505:

  Which DSCP value and PHB equivalent are the default for audio calls?

  A. 46 and EF
  B. 34 and AF41
  C. 32 and AF41
  D. 32 and CS4
  A. 46 and EF

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/qos_dfsrv/configuration/15-mt/qos-dfsrv-15-mt-book/qos-dfsrv.html

• Question 506:

  Which approach is taken to implement CAC within Cisco UCM in full-mesh topology?

  A. physical location
  B. Audio Codec Preference List
  C. RSVP-enabled locations
  D. device pool
  C. RSVP-enabled locations

  ---

  Explanation

  Cisco Unified Communications Manager also supports Resource Reservation Protocol (RSVP), an additional CAC mechanism that offers additional capabilities for full-mesh network topologies.

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/10_0_1/ccmsys/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100/CUCM_BK_SE5FCFB6_00_cucm-system-guide-100_chapter_01000.html

• Question 507:

  What is a benefit of using DNS in a Cisco collaboration infrastructure?

  A. provides high availability for the collaboration infrastructure
  B. provides certificate-based security
  C. reduces latency for audio and video communications
  D. enables the directory address book in Cisco UCM
  B. provides certificate-based security

• Question 508:

  An administrator is integrating a Cisco Unity Express module to a Cisco UCME system. A test call is placed to the Cisco Unity Express pilot number, but the administrator receives a busy signal. The dial-peer is configured as follows:

  

  How is this issue resolved?

  A. The dial-peer needs to be reconfigured to support the G.711 voice codec.
  B. The dial-peer needs to be reconfigured to support vad.
  C. The destination pattern needs to be changed to match the dialed number of 4100.
  D. The dial-peer needs to be reconfigured to support H 323 instead of SIP.
  A. The dial-peer needs to be reconfigured to support the G.711 voice codec.

  ---

  Explanation

  https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unity-express/62609-tdcmecue.html#anc17

• Question 509:

  The chief officer at a company must reduce collaboration infrastructure costs by onbording all on-permises equipment to the cloud by using CISCO Webex Control Hub. Administrators need the ability to manage upgrades and set up hot desking for on-premises devices.

  Which action must be taken before on boardng devices by using the Control Hub?

  A. Configure tie Control Hub organization ID on the devices
  B. Acquire a license for each device.
  C. Allow HTTP traffic from each device to Control Hub.
  D. Upgrade all the devices to software version CE9.15 or later
  D. Upgrade all the devices to software version CE9.15 or later

  ---

  Explanation

  This is a prerequisite for using the Device Connector tool, which allows you to onboard and register several devices simultaneously to the Webex Control Hub. The Device Connector tool creates a workspace, an activation code, and activates all of your devices in one go. This way you don't need to be physically present in the same room to activate the devices. The other options are not required before onboarding devices by using the Control Hub: Configuring the Control Hub organization ID on the devices is not necessary, as the Device Connector tool will send the device information to your Webex organization and generate activation codes for them. Acquiring a license for each device is not necessary, as you can assign licenses to users and devices after they are registered to the Webex Control Hub. Allowing HTTP traffic from each device to Control Hub is not necessary, as HTTPS connectivity is required for the Device Connector tool to communicate with the devices.

• Question 510:

  What is the element of Cisco Collaboration infrastructure that allows Jabber clients outside of the network to register in Cisco Unified Communications Manager and use its resources?

  A. Cisco IM and Presence node
  B. Cisco Unified Border Element
  C. Cisco Expressway
  D. Cisco Prime Collaboration Provisioning server
  C. Cisco Expressway

  ---

  Explanation

  "Cisco Unified Communications Mobile and Remote Access (MRA) is part of the Cisco Collaboration Edge Architecture. It allows endpoints such as Cisco Jabber to have their registration, call control, provisioning, messaging and presence services provided by Cisco Unified Communications Manager (Unified CM) when the endpoint is outside the enterprise network. The Expressway provides secure firewall traversal and line-side support for Unified CM registrations. ..."