Cisco 350-801 Online Practice Questions and Exam Preparation

Cisco 350-801 Online Questions & Answers

• Question 521:

  Which version is used to provide encryption for SNMP management traffic in collaboration deployments?

  A. SNMPv1
  B. SNMPv3
  C. SNMPv2
  D. SNMPv2c
  B. SNMPv3

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/snmp/configuration/xe-16/snmp-xe-16-book/nm-snmp-encrypt-snmp-support.html

• Question 522:

  Which protocol is used between Cisco Jabber clients for instant messaging and presence?

  A. Jabber
  B. P2P
  C. SIP/SIMPLE
  D. XMPP
  D. XMPP

  ---

  Explanation

  An XMPP connection handles the presence information exchange and instant messaging operations for XMPP-based clients.

  References:

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_00.html

• Question 523:

  Refer to the exhibit.

  

  There is a call flow between Phone A and Phone B. Phone B (holder) places Phone A (holdee) on hold.

  Which MRGL and Audio Source are played to Phone A?

  A. MRGL A and Audio Source 4
  B. MRGL B and Audio Source 2
  C. MRGL B and Audio Source 4
  D. MRGL A and Audio Source 2
  D. MRGL A and Audio Source 2

  ---

  Explanation

  In simplest terms, the holder's configuration determines which audio file to play, and the holdee's configuration determines which resource or server will play that file. As illustrated by the example in Figure 18-1, if phones A and B are on a call and phone B (holder) places phone A (holdee) on hold, phone A will hear the MoH audio source configured for phone B (Audio-source2). However, phone A will receive this MoH audio stream from the MRGL (resource or server) configured for phone A (MRGL A).

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/8x/moh.html#wp1092723

• Question 524:

  Which service must be enabled when LDAP on cisco UCM is used?

  A. Cisco AXL Web Service
  B. Cisco CallManager SNMP Service
  C. Cisco DirSync
  D. Cisco Bulk provisioning Service
  C. Cisco DirSync

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/im_presence/configAdminGuide/10_5_1/CUP0_BK_CE43108E_00_config-admin-guide-imp-105/CUP0_BK_CE43108E_00_config-admin-guide-imp-105_chapter_01000.html

• Question 525:

  An administrator needs to stop the leading 9 from outbound calls on an IOS Voice Gateway and ensure that the system handles 911 emergency calls.

  Which configuration is needed to accomplish this task?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  B. Option B

• Question 526:

  Which Cisco UCM feature allows a user to connect a new supported phone, dial an IVR, and associate the device to that user?

  A. Bulk provisioning
  B. Self-provisioning
  C. Local route group
  D. Forced authorization code
  B. Self-provisioning

  ---

  Explanation

  Self-provisioning is correct because it is the endpoint deployment method in which the user plugs in the phone and completes device association through the provisioning workflow. Bulk provisioning is an administrator-driven mass deployment method, while local route group and forced authorization code are call-routing features.

• Question 527:

  Which Cisco lM and Presence service handles failover and state changes in the cluster?

  A. XCP Sync Agent
  B. Cisco Server Recovery Manager
  C. Cisco XCP Connection Manager
  D. XCP router
  B. Cisco Server Recovery Manager

• Question 528:

  Which DSCP PHB classification must be used to configure QoS for voice on a high-speed network?

  A. EF
  B. CS4
  C. AF43
  D. 43
  A. EF

• Question 529:

  How are network devices monitored in a collaboration network?

  A. The Cisco Discovery Protocol table is shared among devices.
  B. Ping Sweep reports "unmanaged' state devices.
  C. System logs are collected in a Cisco Prime Collaboration Server.
  D. Simple Network Managed Protocol is enabled on each device to poll specific values periodically.
  D. Simple Network Managed Protocol is enabled on each device to poll specific values periodically.

  ---

  Explanation

  The Simple Network Management Protocol (SNMP)is an application-layer protocol that uses a call-and-response system to check the status of many types of devices, from switches to printers. SNMP can be used to monitor system status and configuration.

• Question 530:

  An administrator must implement a new Cisco Unity Connection cluster integrated with LDAP for users and SIP with Cisco UCM.

  Assuming a phone system and LDAP directory has been configured, how must the administrator add a new user mailbox with message waiting indication functionality to this setup?

  A. Import the new user from LDAP, configure the mailbox, and configure a SIP trunk for MWI functionality.
  B. Import the new user from LDAP, configure the mailbox, and set up MWI on and off DNs in Cisco UCM.
  C. Sync the new user from Cisco UCM using AXL setup, and set up MWI on and off DNs in Cisco UCM.
  D. Manually configure the new user with required parameters, and set up MWI on and off DNs in Cisco UCM.
  A. Import the new user from LDAP, configure the mailbox, and configure a SIP trunk for MWI functionality.