Cisco 350-801 Online Practice Questions and Exam Preparation

Cisco 350-801 Online Questions & Answers

• Question 391:

  A customer asked to integrate Unity Connection with Cisco UCM using SIP protocol.

  Which two features must be enabled on SIP security profiles? (Choose two)

  A. Accept presence subscription
  B. Enable application level authorization.
  C. Allow charging header
  D. Accept replaces header
  E. Accept unsolicited notification
  D. Accept replaces header
  E. Accept unsolicited notification

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/connection/11x/integration/guide/cucm_sip/b_cucintcucmsip/b_cucintcucmsip_chapter_011.html

• Question 392:

  Which certificate standard is explicitly identified in the exam topics for collaboration security troubleshooting?

  A. x.509
  B. PEM
  C. DER
  D. PKCS#7
  A. x.509

  ---

  Explanation

  x.509 is correct because the exam topics specifically call out x.509 certificates under collaboration security troubleshooting. The other terms refer to file formats or packaging methods rather than the named certificate standard in the blueprint.

• Question 393:

  An engineer with troubleshoots poor voice quality on multiple calls. After looking at packet captures, the engineer notices high levels of jitter.

  Which two areas does the engineer check to prevent jitter? (Choose two.)

  A. The network meets bandwidth requirements.
  B. MTP is enabled on the SIP trunk to Cisco Unified Border Element.
  C. Cisco UBE manages voice traffic, not data traffic.
  D. All devices use wired connections instead of wireless connections.
  E. Voice packets are classified and marked.
  A. The network meets bandwidth requirements.
  E. Voice packets are classified and marked.

  ---

  Explanation

  References:

  https://www.cisco.com/c/en/us/support/docs/voice/voice-quality/20371-troubleshoot-qos-voice.html

• Question 394:

  An engineer is configuring a PRI card on a Cisco ISR 4300 Series Router. When the engineer configures the voice PRI on the router, this error is received: "T1 0/1/0: No DSP resources to configure voice feature".

  Which action must the engineer take to resolve the issue if a PVDM card was installed in the motherboard?

  A. Install the NIM card on a different slot.
  B. Replace the memory slot in the motherboard.
  C. Replace the flashcard, restart the router, and try it again.
  D. Install the PVDM directly to the NIM card.
  D. Install the PVDM directly to the NIM card.

• Question 395:

  An engineer must enable onboarding of on-premises devices by using activation to a Cisco UCM server.

  The engineer activated the CISCO Device Activation Service and set the default registration method to use the codes.

  Which action completes the configuration?

  A. Set Enable Activation Code enterprise parameter to True-
  B. Manually provision new phones that have an activation code requirement
  C. Create a Bulk Administration Tool provisioning template.
  D. Generate 16-digit codes by using the Bilk Administration Tool
  A. Set Enable Activation Code enterprise parameter to True-

  ---

  Explanation

  The engineer must set the Enable Activation Code enterprise parameter to True. This will enable the use of activation codes for onboarding on-premises devices to a Cisco UCM server. The other options are not necessary to complete the configuration.

  Here are the steps to complete the configuration: Log in to the Cisco Unified Communications Manager (CUCM) Administration interface.

  Go to System > Enterprise Parameters.

  Set the Enable Activation Code enterprise parameter to True.

  Click Save.

  The activation code onboarding feature is now enabled. You can use it to onboard new phones to the CUCM server.

• Question 396:

  Users dial a 9 before a 10-digit phone number to make an off-net call. All 11 digits are sent to the Cisco Unified Border Element before going out to the PSTN.

  The PSTN provider accepts only 10 digits.

  Which configuration is needed on the Cisco Unified Border Element for calls to be successful?

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  A. Option A

• Question 397:

  An engineer configures Cisco Unified Communications Manager to prevent toll fraud.

  At which two points does the engineer block the pattern in Cisco Unified CM to complete this task? (Choose two.)

  A. route pattern
  B. route group
  C. translation pattern
  D. partition
  E. CSS
  A. route pattern
  C. translation pattern

• Question 398:

  An employee of company ABC just quit. The IT administrator deleted the employee's user ID from the active directory at 10 a m. on March 4th. The nightly sync occurs at 10 p.m daily. The IT administrator wants to troubleshoot and find a way to delete the user ID as soon as possible.

  How is this issue resolved?

  A. Wait until 10 pm on March 4th when the user is automatically removed from Cisco UCM
  B. Wait until 10 pm on March 5th when the user is automatically removed from Cisco UCM.
  C. Wait until 3:15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.
  D. Wait until 3:15 a.m. on March 5th for garbage collection to remove the user from Cisco UCM
  C. Wait until 3:15 a.m. on March 6th for garbage collection to remove the user from Cisco UCM.

  ---

  Explanation

  User must be marked inactive for 24 hours before garbage collection will remove

  References:

  https://community.cisco.com/t5/unified-communications/cucm-active-directory-integretion-question-regarding-the-garbage/td-p/4083543

• Question 399:

  Which DSCP marking is represented as 101110 in an IP header?

  A. EF
  B. CS3
  C. AF41
  D. AF31
  A. EF

• Question 400:

  A collaboration engineer must optimize the dial plan within Cisco UCM. There are multiple remote sites, and each site has its own route patterns and local gateways.

  What should the engineer do on the cisco UCM to optimize the dial plan?

  A. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.
  B. Create a centralized dial plan with a Cisco UCM Session Management Edition cluster or a Cisco gatekeeper.
  C. Implement ILS with GDPR so the dial plan can dynamically replicate across clusters.
  D. Leverage Cisco UCM Express as SRST so the phones can have more features of each remote site
  A. Configure a Standard Local Route Group to use a single route pattern for all calls within the cluster.