Cisco 350-050 Online Practice Questions and Exam Preparation

Cisco 350-050 Online Questions & Answers

• Question 111:

  What does RLDP do?

  A. allows APs to detect rogues
  B. allows the Cisco MSE or location appliance to calculate the location of rogues
  C. allows APs to determine whether undetected rogue APs or clients are in the area
  D. makes APs stop servicing clients and tries to associate to the unsecured AP, to send special UDP packet to the Cisco WLC
  E. makes APs try to break the security of rogue APs, to allow better containment
  D. makes APs stop servicing clients and tries to associate to the unsecured AP, to send special UDP packet to the Cisco WLC

• Question 112:

  You are on the U.S. East Coast (EST time zone, UTC-5) and configure NTP on your Cisco WLC. The Cisco WLC web GUI shows the correct time and date, but your APs are off by 5 hours. Which statement is true?

  A. This behavior is normal because the APs show UTC time.
  B. You need to configure the time zone on the APs.
  C. You need to configure the NTP server on the APs.
  D. You need to enable time-zone synchronization between the APs and Cisco WLC.
  E. APs support only an SNTP server, not an NTP server.
  A. This behavior is normal because the APs show UTC time.

• Question 113:

  Refer to the exhibit.

  

  The help desk informs you that some users cannot receive multicast video. Upon troubleshooting, you determine that the users who are unable to receive the multicast video are all connected at 9 Mbps. Users that are connected at a data rate of 12 Mbps or higher are able to receive the multicast video. Which data rate can you modify to fix the problem?

  A. Change 6 Mbps to Supported.
  B. Change 6 Mbps to Mandatory.
  C. Change 9 Mbps to Supported.
  D. Change 9 Mbps to Disabled.
  D. Change 9 Mbps to Disabled.

• Question 114:

  DRAG DROP

  Select and Place:

  

  

• Question 115:

  When viewed from the side (in the H-plane), which two of the below statements describe the radiation pattern of a patch and a Yagi antenna? (Choose two.)

  A. the patch patterns are egg-shaped.
  B. the patch patterns are conical.
  C. the patch patterns are doughnut-shaped.
  D. the Yagi patterns are conical.
  E. the Yagi patterns are egg-shaped.
  F. the Yagi patterns are doughnut-shaped.
  A. the patch patterns are egg-shaped.
  D. the Yagi patterns are conical.

• Question 116:

  What is the function of the distance command on an autonomous 802.11 bridge?

  A. to adjust the data rate of the packet transmission
  B. to adjust the bridge timeout values to account for the time that is required for radio signals to travel from bridge to bridge
  C. to give the person reading the configuration an idea of how far apart the bridge links are
  D. to increase the time that is needed for authentication
  B. to adjust the bridge timeout values to account for the time that is required for radio signals to travel from bridge to bridge

• Question 117:

  What is the benefit of using a CA-signed certificate over a self-signed certificate?

  A. You can generate a certificate with a longer validity period.
  B. Fewer steps need to be generated.
  C. More authentication types are supported.
  D. You can avoid impersonation attacks.
  E. You can use bigger keys.
  D. You can avoid impersonation attacks.

• Question 118:

  When configuring authentication for a WLAN through a RADIUS server, which statement is correct when per-WLAN RADIUS source support is enabled?

  A. You must specify a RADIUS server in the WLAN settings; otherwise, authentications will fail.
  B. If the RADIUS server is on one of the WLC dynamic interface networks, RADIUS traffic from the controller will be sourced from that dynamic interface.
  C. If AAA override is enabled, the WLAN settings will override any RADIUS attribute received by the RADIUS server.
  D. Wireless clients need to trust the WLC certificate in case of EAP-TLS authentications.
  B. If the RADIUS server is on one of the WLC dynamic interface networks, RADIUS traffic from the controller will be sourced from that dynamic interface.

• Question 119:

  DRAG DROP

  Select and Place:

  

  

• Question 120:

  Your company is using wireless voice clients that have a unicast push-to-talk-function. DTIM is set to 10. Users report that the audio is choppy. Which action should you take to try to resolve this issue?

  A. Lower the DTIM to 2.
  B. Lower the DTIM to 1.
  C. Disable power saving on the wireless device.
  D. Enable power saving on the wireless device.
  E. Raise the DTIM to 15.
  C. Disable power saving on the wireless device.