F5 303 Online Practice Questions and Exam Preparation

F5 303 Online Questions & Answers

• Question 11:

  A BIG-IP Administrator makes a configuration change to the BIG-IP device. Which file logs the message regarding the configuration change?

  A. /var/log/messages
  B. /var/log/audit
  C. /var/log/user.log
  D. /var/log/secure
  B. /var/log/audit

• Question 12:

  A device group is made up of four members: LTM-A, LTM-B, LTM-C, and LTM-D. An LTM Specialist makes a configuration change on LTM-B. Later, a different LTM Specialist notices a "changes pending" message on all devices. When logged into LTM-D, the LTM Specialist attempts to config-sync to the device group. The sync operation fails.

  Why is the LTM Specialist on LTM-D unable to synchronize the configuration to the group?

  A. The changes made on LTM-B are invalid.
  B. LTM-D has the lowest commit-id of the group.
  C. NTP is NOT configured on the devices in the group.
  D. LTM-B is the device eligible to initiate a config-sync.
  D. LTM-B is the device eligible to initiate a config-sync.

• Question 13:

  A webserver is being overloaded with HTTPS traffic. To decrease the load on the server, the LTM Specialist and the Server. Administrator decide to perform SSL offloading on the LTM device. The configuration of the virtual server is as follows:

  

  Which change must be made to the configuration to perform SSL offloading?

  A. Remove the clientssl and http profiles
  B. Remove the clients profile
  C. Remove the clientssl and serverssl profiles
  D. Remove the severssl profile
  D. Remove the severssl profile

• Question 14:

  Refer to the exhibit.

  

  The LTM devices LTM3 and LTM2 have four Traffic Groups defined with approximately the sar of failover objects defined in each group.

  1.Traffic Groups A and C have Default Device set to LTM1

  2.Traffic Groups Band D have Default Device set to LTM2.

  3.Traffic Groups B and C do NOT have Auto Failback enabled.

  4.Traffic Groups A and D have Auto Failback enabled with a timeout value of 60 seconds.

  Both LTM devices are healthy and able to pass traffic for any Traffic Group. LTM1 loses connectivity on interface 1.4. The LTM Specialists notified 60 seconds after the interface goes down.

  What is the state of the Traffic Groups on each LTM device?

  A. LTM1: Traffic Group C LTM2: Traffic Groups A, B, and 0
  B. C, and D
  C. LTM1: Traffic Groups A, B, C, and D LTM2: No Traffic Groups
  D. LTM1: Traffic Groups B and C LTM2: Traffic Groups A and 0
  B. C, and D

• Question 15:

  An LTM Specialist needs to configures virtual server that uses PVA or OPVA Which virtual server type should be used?

  A. Stateless
  B. Performance (HTTP)
  C. Standard
  D. Performance (Layer 4)
  D. Performance (Layer 4)

• Question 16:

  in which Application Visibility and Reporting (AYR) profile must the SMTP profile be defined to configure notifications via email?

  A. App analytics profile
  B. virtual server profile
  C. customanalytics profile
  D. default analytics profile
  C. customanalytics profile

• Question 17:

  An LTM device is serving an FTP virtual server that has three pool members. The FTP pool members are monitored via TCP port 21. Customers are reporting that they are able to log in, but are sometimes unable to upload files to the server. Which monitor should the LTM Specialist configure to verify that the servers can handle file uploads?

  A. FTP
  B. Inband
  C. External
  D. Scripted
  E. Real Server
  C. External

• Question 18:

  Which command line interface command will check if the BIG-IP platform contains a packet velocity ASIC (PVA)?

  A. bigpipe platform show | grep -i pva
  B. tmsh show /sys hardware pva status
  C. tmsh show /sys hardware | grep -i pva
  D. tmsh show /ltm hardware | grep -i pva
  C. tmsh show /sys hardware | grep -i pva

• Question 19:

  Refer to the exhibit.

  

  Users are able to access the application when connecting directly to the web server but are unsuccessful when connecting to the virtual server. Return traffic bypasses the LTM device using Layer 2 nPath routing. Which configuration change resolves this problem?

  A. Enable a SNAT pool on the LTM device.
  B. Disable address translation on the LTM device.
  C. Configure a route on the web server to the client subnet.
  D. Configure the virtual server to listen on port 80 on the LTM device.
  E. Configure the VIP address on the loopback interface of the web server.
  E. Configure the VIP address on the loopback interface of the web server.

• Question 20:

  What should the 816-IP Administrator provide when opening a new ticket with F5 Support?

  A. bigip.license file
  B. QKViewfile
  C. Device root password
  D. SSL private keys
  B. QKViewfile