Cisco 300-460 Online Practice Questions and Exam Preparation

Cisco 300-460 Online Questions & Answers

• Question 71:

  Refer to the exhibit.

  

  A cloud engineer is replicating a FlexPod design. The current design has a Cisco UCS B- Series Chassis with six Cisco B200 M2 blades that connect to a NetApp FAS800 storage array. VSAN 10 is configured on the Cisco Nexus 5000 Series Switch to handle all storage traffic. VMs on the Cisco B200 M2 blades can read and write to NAS on the NetApp FAS8000. The engineer wants to connect a second Cisco UCS B-Series Chassis with four Cisco B200 M4 blades to the NetApp array. The engineer has configured four Fibre Channel uplink ports from the Cisco UCS 6248 UP Fabric Interconnect to the Cisco Nexus Fibre Channel ports fc1/23 and fc 1/24. However, the Fibre Channel ports on the Cisco UCS 6248 fail to initialize after the engineer enables the port.

  Which reason for the problem is most likely true?

  A. The SFP type is 10 Gigabit Ethernet instead of 4 Gigabit Ethernet.
  B. The port negotiation speed is set to 8 Gbps.
  C. The switch port mode on the Cisco Fabric Extender Fibre Channel port is set to NP.
  D. The Fibre channel port is set to uplink instead of Fibre Channel storage port.
  E. The VSAN under port properties is incorrect.
  C. The switch port mode on the Cisco Fabric Extender Fibre Channel port is set to NP.

• Question 72:

  An engineer must create Cisco UCS service profiles for a new B-Series ESXi deployment. Which two configuration steps must be performed to isolate live migration traffic within a single Cisco UCS Fabric Interconnect? (Choose two.)

  A. Install Cisco Nexus 1000V.
  B. Enable fabric failover.
  C. Create a single vNIC for the vSwitch.
  D. Disable fabric failover.
  E. Create one vNIC per fabric for the vSwitch.
  F. Install VM-FEX.
  B. Enable fabric failover.
  F. Install VM-FEX.

• Question 73:

  Which two pieces of information are needed when adding an NFS mount point in Cisco UCS Director? (Choose two.)

  A. the IP address of the NFS server where you plan to store the OS images for Bare Metal Agent to use
  B. the locate and organization where the NFS server is located
  C. the IP address of the IP share storage system
  D. the location of the NFS server where the OS images are stored
  E. the IP address of the main UCS server
  A. the IP address of the NFS server where you plan to store the OS images for Bare Metal Agent to use
  D. the location of the NFS server where the OS images are stored

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/bma- install-config/52/b_ucsd_bma_install_config_guide_5_2/b_ucsd_bma_install_config_guide_5_2_chapter_ 0110.html#task_FB4A6403CF4F4650B31A8C2C6FF4E69F

• Question 74:

  A Cisco UCS Director administrator is charging the boot . Which option lists the steps that accomplish this task?

  A. On the menu bar, choose Physical > Storage. In the left pane, expand the pod and then click the Cisco UCS Manager account In the right pane, click the Organizations tab Click the organization in which you want to modify a policy and then click View details Click the Manage Boot Order tab. Choose the boot policy that you want to clone and click Manage Boot Order
  B. On the menu bar, choose Physical > Compute. In the left pane, expand the pod and then click the Cisco UCS Manager account In the right pane, click the Organizations tab Click the organization in which you want to modify a policy and then click View details Click the Manage Boot Order tab. Choose the boot policy that you want to clone and click Manage Boot Order
  C. On the menu bar, choose Physical > Storage. In the left pane, expand the pod and then click the Cisco UCS Manager account In the right pane, click the Organizations tab Click the organization in which you want to modify a policy and then click View details Click the Boot Policies tab. Choose the boot policy that you want to clone and click Manage Boot Devices Order
  D. On the menu bar, choose Physical > Compute. In the left pane, expand the pod and then click the Cisco UCS Manager account In the right pane, click the Organizations tab Click the organization in which you want to modify a policy and then click View details Click the Boot Policies tab. Choose the boot policy that you want to clone and click Manage Boot Devices Order
  D. On the menu bar, choose Physical > Compute. In the left pane, expand the pod and then click the Cisco UCS Manager account In the right pane, click the Organizations tab Click the organization in which you want to modify a policy and then click View details Click the Boot Policies tab. Choose the boot policy that you want to clone and click Manage Boot Devices Order

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/ucs- central-mgmtguide/41/b_Cisco_UCS_Director_UCSCentral_Mgmt_Guide_41/b_Cisco_UCS_Director_UCSCent ral_Mgmt_Guide_41_chapter_0111.html#concept_2313A9F59CD94237819D14A3CA608D FD

• Question 75:

  An engineer wants to verify the VXLAN configuration on a Cisco Nexus 1000V Series Switch. Which NX-OS command provides the following partial output?

  Segment ID: 5000 (manual/Active)Group IP: 239.1.1.1NR A. show port-profile usage
  B. show interface switchport
  C. show bridge-domain
  D. show feature | begin Segment

  C. show bridge-domain

  ---

  Reference:

  https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_2_1_s_v_1_5 _1/vxlan/configuration/guide/n1000v_vxlan/n1000v_vxlan_basic.html

• Question 76:

  Which three boot policies can be created for Cisco UCS Manager in Cisco UCS Director? (Choose three.)

  A. VLAN boot
  B. UEFI secure boot
  C. iSCSI boot
  D. NFS boot
  E. SAN boot
  F. FCOE boot
  A. VLAN boot
  C. iSCSI boot
  E. SAN boot

  ---

  Reference: Various boot options are: SAN Boot LAN Boot Local Disk Boot Virtual Media Boot iSCSI Boot

• Question 77:

  A Cisco USCM administrator is creating a boot policy. Which option lists the steps needed to accomplish this task?

  A. In the Navigation pane, click the Servers tab. On the Servers tab, expand Servers > Policies. Right-click Boot Policies and select Create Boot Policy.
  B. In the Navigation pane, click the Equipment tab. Expand Equipment > Rack-Mounts >Servers > Boot Policies. Right-click Boot Orders and select Create Boot Policy.
  C. In the Navigation pane, click the Servers tab. On the Servers tab, expand Servers > Policies. Click Boot Order and the Modify Boot Policy wizard displays. Click Modify Boot Policy.
  D. In the Navigation pane, click the Servers tab. On the Servers tab, expand Servers > Policies. Click Boot Security. Click Modify Boot Policy.
  A. In the Navigation pane, click the Servers tab. On the Servers tab, expand Servers > Policies. Right-click Boot Policies and select Create Boot Policy.

• Question 78:

  With which three types of zoning can a Cisco UCS domain be configured? (Choose three.)

  A. cloud-based Fibre Channel zoning
  B. Cisco UCS local Fibre Channel zoning
  C. hybrid-based Fibre Channel zoning
  D. switch-based Fibre Channel zoning
  E. no zoning
  F. vBlock-based Fibre Channel zoning
  B. Cisco UCS local Fibre Channel zoning
  D. switch-based Fibre Channel zoning
  E. no zoning

  ---

  Reference:

  http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configuration_Guide_2_2/b_UCSM_GUI_Configuration_Guide_2_2_chapt er_011011.pdf

• Question 79:

  Which two statements about virtual networks in a Cisco-powered private cloud are true? (Choose two.)

  A. After the last VM is shutdown, the associated virtual network is gone for garbage collection.
  B. The last vNIC can be deleted issuing the command no interface virtual.
  C. Virtual networks are abstractions whose state is stored in the orchestration layer.
  D. N1KV supports dynamic routing on virtual networks.
  E. Issue the show module command in virtual supervisor module to view virtual network mapping with VM.
  D. N1KV supports dynamic routing on virtual networks.
  E. Issue the show module command in virtual supervisor module to view virtual network mapping with VM.

• Question 80:

  An engineer is troubleshooting a new hypervisor install in which the management VMK is inaccessible from the user subnet. Which CLI command issued within the upstream Cisco Nexus 5672 switch verifies its gateway interface can resolve the address mapping of the VMK?

  A. show cdp neighbor
  B. show ip arp
  C. show ip route
  D. show bgp route.
  A. show cdp neighbor