Cisco 300-460 Online Practice Questions and Exam Preparation

Cisco 300-460 Online Questions & Answers

• Question 1:

  Which port-channel type is the best when deploying a Cisco Nexus 1000V with Cisco UCS B-Series Blades?

  A. channel-group mode on sub-group cdp
  B. channel-group auto mode on mac-pinning
  C. channel-group auto mode active
  D. channel-group mode on mac-pinning
  B. channel-group auto mode on mac-pinning

  ---

  Reference: http://www.cisco.com/c/en/us/products/collateral/switches/nexus-1000v-switch- vmware-vsphere/white_paper_c11-558242.html

• Question 2:

  A cloud architect is creating a solution to allow virtual machines to be provisioned into a DMZ. Security requirements specify that all traffic between DMZ and internal networks must pass through the firewall. As long as this requirement is met, DMZ zone and internal zone resources must be pooled to reduce costs. Which action is the most likely to meet these requirements?

  A. Ensure that DMZ virtual machines reside on a dedicated DMZ compute cluster that is separate from compute clusters that are used for non-DMZ virtual machines.
  B. Ensure that DMZ virtual port groups are separate from non-DMZ virtual port groups.
  C. Ensure that any Fibre Channel traffic for DMZ virtual machines utilizes a dedicated VSAN that is separate from non-DMZ virtual machines.
  D. Ensure that iSCSI traffic for DMZ virtual machines is on separate networks from iSCSI traffic for internal virtual machines.
  E. Ensure that DMZ virtual machine traffic uses dedicated physical NICs.
  A. Ensure that DMZ virtual machines reside on a dedicated DMZ compute cluster that is separate from compute clusters that are used for non-DMZ virtual machines.

• Question 3:

  Which three options does the Cisco UCS Manager boot policy determine? (Choose three.)

  A. initiator port range
  B. selection of the boot device
  C. location from which the server boots
  D. initiator and target ports
  E. global boot device priority
  F. order in which boot devices are invoked
  B. selection of the boot device
  C. location from which the server boots
  F. order in which boot devices are invoked

• Question 4:

  A Cisco UCS Director administrator is viewing the status of his pod on the Virtual > Compute tab. Which three tabs are available under this menu? (Choose three.)

  A. VMs
  B. VM Chargeback
  C. Service Requests
  D. VM Reservations
  E. Resource Pools
  F. vDCs
  A. VMs
  E. Resource Pools
  F. vDCs

• Question 5:

  A Cisco UCS Director administrator is trying to mapping policies. Where can this task be accomplished?

  A. Virtual > Physical Infrastructure Policies
  B. Virtual > Virtual/Hypervisor Policies
  C. Policies > Physical Infrastructure Policies
  D. Policies > Virtual/Hypervisor Policies
  D. Policies > Virtual/Hypervisor Policies

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs- director/vsphere-mgmt-guide/50/b_UCS_Director_VMware_vSphere_Management_Guide_50/b_UCS_Director_VMware_ vSphere_Management_Guide_50_chapter_0100.html#topic_736267F57B684D349EBA0C F77B2E17C6

• Question 6:

  An engineer has designed a new Cisco UCS Director workflow to create a new Fibre Channel LUN and present it to ESXi hosts. After execution of the workflow, the LUN is not visible to the ESXi hosts. Which two actions must be taken to begin to troubleshoot the failed workflow? (Choose two.)

  A. Look for information within vCenter Server under the Events tab for vCenter Server.
  B. Look at the information that is produced in the rollback script that is associated with the failed workflow.
  C. Look for information within vCenter Server under the Events tab for the applicable ESXi server.
  D. Look for information within Cisco UCS Director under the Log tab of the Service Request Details window.
  E. Look for information within Cisco UCS Director under the Input/Output tab of the Service Request Details window.
  A. Look for information within vCenter Server under the Events tab for vCenter Server.
  D. Look for information within Cisco UCS Director under the Log tab of the Service Request Details window.

• Question 7:

  A private cloud engineer is adding a production FlexPod into a new Cisco UCS Director deployment. Which two operational domains contain Cisco components within this data center pod? (Choose two.)

  A. storage
  B. compute
  C. virtual
  D. network
  E. service delivery
  B. compute
  D. network

• Question 8:

  Which option describes the difference between in-band and out-of-band IP management pool in Cisco UCS?

  A. An out-of-band network is the only method to connect with the Cisco IMC blade.
  B. An in-band network policy requires twice the IP address space of an out-of-band policy.
  C. An out-of-band network is reachable over the Fabric Interconnect server interfaces, and in-band network is reachable over uplink interfaces.
  D. An out-of-band network is reachable over the Fabric Interconnect mgmt0 interfaces, and in-band network is reachable over uplink interfaces.
  D. An out-of-band network is reachable over the Fabric Interconnect mgmt0 interfaces, and in-band network is reachable over uplink interfaces.

• Question 9:

  After implementing VXLAN VTEPs in a VMware NSX deployment, an engineer discovers that the VXLAN tunnel does not appear to function across the physical network. A pair of Cisco Nexus 5596UP Switches onnet the virtual network to the physical network. To permit the VXLAN tunnel to operate correctly, which action must the engineer take?

  A. Upgrade Cisco Nexus to version 7.0 code.
  B. Establish a dynamic routing protocol between the vSphere virtual router and the Cisco Nexus switches.
  C. Remove storm control mechanisms that are blocking the establishment of the VXLAN tunnel.
  D. Configure jumbo frame support on the Cisco Nexus switches.
  E. Build a GRE tunnel to correctly encapsulate VXLAN between the networks.
  B. Establish a dynamic routing protocol between the vSphere virtual router and the Cisco Nexus switches.

• Question 10:

  A Cisco USC Director administrator is viewing the workflow input and output status of a service request. Which option lists the steps that accomplish this task?

  A. On the menu bar, choose Organizations > My Approvals. Choose a user group. Click the Service Request tab. Choose a service request. Click View Details, and choose the Log tab.
  B. On the menu bar, choose Organizations > Virtual Resources. Click the Service Requests tab. Choose the service request. Click View Details, and choose the Input/Output tab.
  C. On the menu bar, choose Organizations > Service Requests. Click the Service Requests tab. Choose the service request. Click View Details, and choose the Input/Output tab.
  D. On the menu bar, choose Organizations > Service Requests. Choose a user group. Click the Service Request tab. Choose a service request. Click View Details, and choose the Log tab.
  D. On the menu bar, choose Organizations > Service Requests. Choose a user group. Click the Service Request tab. Choose a service request. Click View Details, and choose the Log tab.

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/cloud-systems-management/intercloud- fabric/2-12/userguide/icf/b_Cisco_Intercloud_Fabric_User_Guide_Release_2_1_2/b_Cisco_Interclou d_Fabric_User_Guide_Release_2_0_chapter_01000.html