Cisco 300-460 Online Practice Questions and Exam Preparation

Cisco 300-460 Online Questions & Answers

• Question 41:

  Where does performance tuning of high CPU utilization take place in Cisco UCS?

  A. high performance policy
  B. energy performance mode policy
  C. compute policy
  D. BIOS policy
  D. BIOS policy

• Question 42:

  Refer to the exhibit.

  

  Which three commands complete the configuration for this Cisco Nexus 1000V port profile that is assigned to a vmkernel used for L3 VSM control plane? (Choose three.)

  A. service-policy type qos output vmk-control
  B. vmware port-group
  C. system vlan 119
  D. capability 13control
  E. swithchport mode trunk
  F. mtu 9000
  G. swithchport 12control
  B. vmware port-group
  C. system vlan 119
  D. capability 13control

• Question 43:

  An engineer needs to install a hypervisor on a Cisco UCS B-Series Blade Server. The operating system must remain local to the server and must be resilient. Which two hardware components are required to accomplish this? (Choose two.)

  A. onboard flash memory
  B. SD card
  C. external USB
  D. internal USB
  E. Local disk
  A. onboard flash memory
  E. Local disk

• Question 44:

  An engineer is creating WWPN pools to use for vHBAs. Which WWPN must the engineer use?

  A. 20:00:20:25:B5:XX:XX:XX
  B. 20:XX:XX:25:B5:00:00:00
  C. 10:00:00:25:B5:XX:XX:XX
  D. 20:00:00:25:B5:XX:XX:XX
  D. 20:00:00:25:B5:XX:XX:XX

  ---

  Reference:

  https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/1-3- 1/b_UCSM_GUI_Configuration_Guide_1_3_1/UCSM_GUI_Configuration_Guide_1_3_1_c hapter22.pdf

• Question 45:

  An engineer is configuring two new Cisco UCS domains that are connected to the same network and SAN infrastructure. What must the engineer do to configure MAC pools and WWPN pools?

  A. Configure UCS 1 pool addresses and extend the pools to UCS 2.
  B. Configure different pool addresses for each Cisco UCS domain.
  C. Configure shared pool addresses for each Cisco UCS domain.
  D. Configure the same pool addresses for each Cisco UCS domain.
  C. Configure shared pool addresses for each Cisco UCS domain.

• Question 46:

  An engineer must ensure that all VXLAN and VTEP processes are kept on purpose-built hardware to ensure that all overlay functions are as fast as possible. In which solution is all VXLAN and VTEP decision making moved to the hardware, versus potentially slower software control?

  A. Layer 3
  B. ACI
  C. NSX
  D. Layer 2
  A. Layer 3

• Question 47:

  In which topology should Cisco UCS vNIC Fabric Failover be enabled?

  A. on every vNIC on every service profile
  B. only on vNICs assigned to hypervisors
  C. only on vNICs assigned to bare metal operating systems
  D. only on vNICs when an operating system level teaming driver is unavailable
  D. only on vNICs when an operating system level teaming driver is unavailable

• Question 48:

  An administrator is troubleshooting a virtual switch that does not show up when it is added to the host using the port-profile management snap-in. Which action is the next step?

  A. Enable SR-IOV for the virtual switch inside Hyper-V
  B. Add drivers for the virtual switch
  C. Reboot the server
  D. Enable VMbus for the parent partition and the virtual machine
  C. Reboot the server

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/vm_fex/hyperv/gui/config_ guide/2-1/b_GUI_Hyper-V_VM-FEX_UCSM_Configuration_Guide/b_GUI_Hyper-V_VMFEX_UCSM_Configuration_Guide_chapter_0101.html#task_FD3156BC3C7F48FBB F728E8A824E81CA

• Question 49:

  An engineer needs to install Windows Server 2012 R2 on a Cisco UCS B-Series Blade Server from an operating system image in Cisco UCS Director using PXE boot. Which agent must the engineer use?

  A. Cisco UCS Director Bare Metal Agent
  B. Cisco ISO Agent
  C. Windows Boot Agent
  D. Cisco UCS Boot Agent
  A. Cisco UCS Director Bare Metal Agent

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-director/bma- install-config/5-2/b_ucsd_bma_install_config_guide_5_2/b_ucsd_bma_install_config_guide_5_2_appendix _01000.pdf

• Question 50:

  Two companies want to integrate their storage infrastructure. Both companies use a single Cisco MDS 9513 Multilayer Director, but they use Fibre Channel storage arrays from different vendors. Physical connectivity between the two Cisco MDS 9513s is already in place. No common VSAN IDs exist between the two companies. Which option is most likely to achieve the goal?

  A. Configure NPV.
  B. Configure static FCIDs.
  C. Change the storage arrays to the same vendor.
  D. Enable FC-NAT.
  E. Configure IVR.
  A. Configure NPV.