Cisco 300-420 Online Practice Questions and Exam Preparation

Cisco 300-420 Online Questions & Answers

• Question 291:

  Which feature minimizes TLOC connections and reduces strain on the vSmart controller in an SD-WAN architecture?

  A. control-direction
  B. affinity
  C. color
  D. control-connections
  B. affinity

• Question 292:

  An engineer working for a service provider with an employee ID: 4604:68:004 prepared several designs for a traditional campus network. The design must allow the deployment of the same VLAN to any switch at the access layer and must support:

  1.fast convergence

  2.high availability

  3.resilience

  Which design must be selected?

  

  

  A. Option A
  B. Option B
  C. Option C
  D. Option D
  D. Option D

• Question 293:

  Which feature minimizes HOC connections and reduces strain on the vSmart controller m an SO-WAN architecture?

  A. control-connections
  B. corrtroWirection
  C. color
  D. affinity
  D. affinity

• Question 294:

  What should you do If you are looking at a strategic win with a customer and the customer wants to examine Cisco ISE for longer than a few weeks?

  A. Set them up with an account on a Cisco UCS server that hosts ISE
  B. Set them up with a dCloud account
  C. Provide them with a downloadable POV kit
  D. Point them to our dCloud demo library
  E. Give them some of our flash files that can be played on any browser
  F. Give them our ISE YouTube videos
  C. Provide them with a downloadable POV kit

• Question 295:

  What is a benefit of using VRRPv3 as compared to VRRPv2?

  A. VRRPv3 supports IPv4 and IPv6
  B. VRRPv3 supports authentication
  C. VRRPv3 supports preemption
  D. VRRPv3 supports stateful switchover
  A. VRRPv3 supports IPv4 and IPv6

• Question 296:

  Refer to the exhibit.

  

  A customer needs to apply QoS to the network management traffic passing through the GigabitEthernet0/2 interface. All eight queuing classes are in use, so the new requirement must be integrated into the existing policy. Which solution must the customer choose?

  A. Mark traffic to DSCP CS5 and assign it to the SIGNALLING class. Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the SIGNALLING class.
  B. Mark the traffic to DSCP CS4 and assign it to the SIGNALLING class. Then, prioritize traffic within the class.
  C. Mark the traffic to DSCP CS6 and assign it to the ROUTING class Then, prioritize traffic within the class.
  D. Mark the traffic to DSCP CS2 and assign it to the ROUTING class Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the ROUTING class
  D. Mark the traffic to DSCP CS2 and assign it to the ROUTING class Then, baseline existing queue sizes to determine if additional bandwidth can be provisioned to the ROUTING class

• Question 297:

  Which two primary categories are displayed on the overall health page of the assurance component in the Cisco DNA Center? (Choose two.)

  A. Client
  B. Wired
  C. Access-Distribution
  D. Core
  E. Network
  F. Server
  A. Client
  E. Network

  ---

  Exam C

• Question 298:

  Refer to the exhibit.

  

  A network engineer is designing an OSPF solution to connect a company's remote to a newly provisioned MPLS VPN backbone. Some of the branches have a direct dark fiber connection between each other. The engineer wants to ensure that the dark fibers are used only when the MPLS core is unavailable. Which solution must the engineer choose?

  A. Stub area
  B. Sham link
  C. Virtual link
  D. NSSA
  B. Sham link

• Question 299:

  An engineer is designing a multicast network for a company specializing in VoD content. Receivers are across the Internet, and for performance reasons, the multicast framework must be close to the receivers within each AS. For high availability, if the sources in one AS are no longer available, the receivers of that AS must be able to receive the VoD content from the sources in another AS. Which feature must the design include?

  A. SSM
  B. anycast RP
  C. bidirectional PIM
  D. MSDP
  B. anycast RP

• Question 300:

  DRAG DROP

  Drag and drop the descriptions from the left onto the corresponding VPN types on the right.

  Select and Place: