Cisco 300-375 Online Practice Questions and Exam Preparation

Cisco 300-375 Online Questions & Answers

• Question 161:

  A wireless engineer must implement a corporate wireless network for a large company with ID 338860948 in the most efficient way possible. The wireless network must support a total of 32 VLANS for 300 employees in different departments. What is the best configuration option in this scenario?

  A. Configure a second WLC to support half of the APs in the deployment.
  B. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.
  C. Configure 16 WLANs to be broadcast on the 2.4-GHz band and 16 WLANs to be broadcast on the 5.0-GHz band.
  D. Configure one single SSID and implement Cisco ISE VLLAN assignment according to different user roles.
  B. Configure different AP groups to support different VLANs, so that all of the WLANs can be broadcast on both radios.

• Question 162:

  Which method does a Cisco switch use to authenticate a Cisco lightweight access point that is acting as 802.1X supplicant?

  A. a username and password
  B. EAP-FAST with anonymous PAC provisioning
  C. a password only
  D. 802.1X
  B. EAP-FAST with anonymous PAC provisioning

• Question 163:

  What is the maximum number of clients that a small branch deployment using a four-member Cisco Catalyst 3850 stack (acting as /A) can support?

  A. 10000
  B. 1000
  C. 500
  D. 2000
  E. 5000
  E. 5000

• Question 164:

  An engineer with ID 338860948 is implementing Cisco Identity-Based Networking on a Cisco AireOS controller. The engineer has two ACLs on the controller. The first ACL, named BASE_ACL, is applied to the corporate_clients interface on the WLC, which is used for all corporate clients. The second ACL, named HR_ACL, is referenced by ISE in the Human Resources group policy.

  Which option is the resulting ACL when a Human Resources user connects?

  A. HR_ACL only
  B. HR_ACL appended with BASE_ACL
  C. BASE_ACL appended with HR_ACL
  D. BASE_ACL only
  A. HR_ACL only

• Question 165:

  A WLAN on the WLC is configured for web authentication as the Layer 3 Security policy with the web-auth type External. Which two elements are required as part of the configuration? (Choose two.)

  A. WLAN being not present in the default AP group
  B. IP address assigned to the virtual interface on the WLC, which is not routable
  C. preauth ACL to allow access to the external web server
  D. HTTPS redirection enabled
  E. web-auth secure web option enabled
  C. preauth ACL to allow access to the external web server
  E. web-auth secure web option enabled

• Question 166:

  An engineer is configuring EAP-FAST on a WLAN. Which three components must be configured? (Choose three.)

  A. WLC
  B. AD server
  C. EAP-TLS client
  D. wireless access point
  E. wireless client utility
  F. RADIUS server
  A. WLC
  D. wireless access point
  F. RADIUS server

• Question 167:

  Which two attacks represent a social engineering attack? (Choose two.)

  A. using AirMagnet Wi-Fi Analyzer to search for hidden SSIDs
  B. calling the IT helpdesk and asking for network information
  C. spoofing the MAC address of an employee device
  D. entering a business and posing as IT support staff
  B. calling the IT helpdesk and asking for network information
  D. entering a business and posing as IT support staff

• Question 168:

  An engineer is trying to determine if an existing configuration deviates from the Cisco defaults while enabling PMF on a WLAN. Which set represents the default timer configuration for PMF?

  A. security pmf association-comeback 1 security pmf mandatory security pmf saquery-retry-time 100
  B. security pmf association-comeback 20 security pmf mandatory security pmf saquery-retry-time
  C. security pmf association-comeback 15 security pmf mandatory security pmf saquery-retry-time
  D. security pmf association-comeback 1 security pmf mandatory security pmf saquery-retry-time 200
  D. security pmf association-comeback 1 security pmf mandatory security pmf saquery-retry-time 200

• Question 169:

  Which EAP method can an AP use to authenticate to the wired network?

  A. EAP-GTC
  B. EAP-MD5
  C. EAP-TLS
  D. EAP-FAST
  C. EAP-TLS

• Question 170:

  802.1X AP supplicant credentials have been enabled and configured on a Cisco WLC v7.0 in both the respective Wireless>AP>Global Configuration location and AP>Credentials tab locations. What describes the 802.1X AP authentication process when connected via Ethernet to a switch?

  A. Only WLC AP global credentials are used.
  B. Only AP credentials are used.
  C. WLC global AP credentials are used first; upon failure, the AP credentials are used.
  D. AP credentials are used first; upon failure, the WLC global credentials are used.
  B. Only AP credentials are used.