Cisco 300-375 Online Practice Questions and Exam Preparation

Cisco 300-375 Online Questions & Answers

• Question 11:

  Refer to the exhibit.

  

  You are configuring a controller that runs Cisco IOS XE by using the CLI. Which three configuration options are used for 802.11w Protected Management Frames? (Choose three.)

  A. mandatory
  B. association-comeback
  C. SA teardown protection
  D. saquery-retry-time
  E. enable
  F. comeback-time
  A. mandatory
  B. association-comeback
  D. saquery-retry-time

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/technotes/5700/software/release/ios_xe_33/11rkw_DeploymentGuide/b_802point11rkw_deployment_guide_cisco_ios_xe_release33/ b_802point11rkw_deployment_guide_cisco_ios_xe_release33_chapter_0100.pdf

• Question 12:

  DRAG DROP

  Drag and drop the fast roaming behavior on the left to the description on the right.

  Select and Place:

  

  

• Question 13:

  Which attribute on the Cisco WLC v7.0 does RADIUS IETF attribute "Tunnel-Private-Group ID" assign? A. A. ACL

  A. DSCP
  B. QoS
  C. VLAN
  D. Answer: D
  D. Answer: D

• Question 14:

  Which configuration step is necessary to enable Visitor Connect on an SSID?

  A. A preauthentication ACL must be defined.
  B. A passive client must be enabled.
  C. The SSID must use MAC filtering.
  D. Local client prifiling must be enabled.
  C. The SSID must use MAC filtering.

• Question 15:

  An engineer must ensure that the new wireless LAN deployment can support seamless roaming between

  access points using a standard based on an amendment to the 802.11 protocol. Which protocol must the engineer select?

  A. 802.11e
  B. 802.11r
  C. 802.11ac
  D. 802.11i
  B. 802.11r

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-1/Enterprise-Mobility-8-1-Design-Guide/Enterprise_Mobility_8-1_Deployment_Guide/Chapter-11.pdf

• Question 16:

  Which client roam is considered the fastest in a wireless deployment using Cisco IOS XE mobility controllers and mobility agents?

  A. Roam within stack members
  B. Inter-SPG roam
  C. Interdomain roam
  D. Intermobility roam
  E. Intra-SPG roam
  E. Intra-SPG roam

  ---

  Inter-SPG, Intra-subdomain roamingThe client roaming between mobility agents in different SPGs within the same subdomain. https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3850/software/release/3se/system_m anagement/configuration_guide/b_sm_3se_3850_cg/b_sm_3se_3850_cg_chapter_0111.pdf

• Question 17:

  An engineer is implementing SNMP v3 on a wireless LAN controller and wants to use the combination of authentication and privacy protocols with the highest security available. Which protocols must be configured?

  A. CBC-DES with HMAC-MD5
  B. CFB-AES-128 with HMAC-MD5
  C. CBC-DES with HMAC-SHA
  D. CBF-AES-128 with HMAC-SHA
  C. CBC-DES with HMAC-SHA

• Question 18:

  A customer wants to access points in the CEO's office to have different usernames and passwords for administrative support than the other access points deployed throughout the facility.

  Which feature can be enabled on the WLC and access points to achieve this criteria?

  A. 802.1x supplicant credentials
  B. HTTPS access
  C. local management users
  D. override global credentials
  C. local management users

  ---

  You can configure administrator usernames and passwords to prevent unauthorized users from reconfiguring the switch and viewing configuration information. This section provides instructions for initial configuration and for password

  recovery.

  You can also set administrator usernames and passwords to manage and configure one or more access points that are associated with the switch.

  https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst3650/software/release/16- 1/configuration_guide/b_161_consolidated_3650_cg/b_161_consolidated_3650_cg_chapter_01010 111.pdf

• Question 19:

  Which two wireless actions are needed for protecting data and access for PCI Compliance? (Choose two.)

  A. Enforce wireless Layer 2 encryption policies.
  B. Perform scanning for rogue access points.
  C. Enforce wireless usage policies.
  D. Use a minimum of SHA-1 hashing.
  E. Maintain a packet filter firewall.
  A. Enforce wireless Layer 2 encryption policies.
  E. Maintain a packet filter firewall.

  ---

  Reference: https://www.cisco.com/c/dam/en/us/solutions/collateral/enterprise-networks/pci-compliance/at_a_glance_c45-639503.pdf

• Question 20:

  During the EAP process and specifically related to the logon session, which encrypted key is sent from the RADIUS server to the access point?

  A. WPA key
  B. encryption key
  C. session key
  D. shared-secret key
  C. session key

  ---

  During the logon session, the RADIUS server encrypts and sends the WEP key, called a session key, over the wired LAN to the access point. The access point encrypts its broadcast key with the session key and sends the encrypted broadcast key to the client, which uses the session key to decrypt it. The client and access point activate WEP and use the session and broadcast WEP keys for all communications during the remainder of the session.

  Reference: http://www.cisco.com/c/en/us/td/docs/routers/access/1800/wireless/configuration/guide/awg/s37radi.html