Cisco 300-375 Online Practice Questions and Exam Preparation

Cisco 300-375 Online Questions & Answers

• Question 101:

  An engineer must provide a graphical trending report of the total number of wireless clients on the network. Which report provides the required data?

  A. Client Summary
  B. Posture Status Count
  C. Client Traffic Stream Metrics
  D. Mobility Client Summary
  D. Mobility Client Summary

  ---

  Explanation: Mobility Client Summary - This trending report displays the total number of active clients in your wireless network. Reference: http://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/2-0/user/guide/prime_infra_ug/reps.html#pgfId-1059688

• Question 102:

  Which three commands are part of the requirements on a Cisco Catalyst 3850 Series Switch with Cisco IOS XE to create a RADIUS authentication server group? (Choose three.)

  A. authentication dot1x default local
  B. aaa session-idcommon
  C. dot1x system-auth-control
  D. aaa new-model
  E. local-auth wcm_eap_prof
  F. security dot1x
  G. dot1x config-auth-control
  B. aaa session-idcommon
  C. dot1x system-auth-control
  D. aaa new-model

  ---

  Reference: http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/sec_usr_rad/configuration/xe-3se/3850/sec-usr-rad-xe-3se-3850-book/sec-rad-mult-udp-ports.html

• Question 103:

  Which two elements must be configured on the switch for SPT to successfully detect and shut down an interface? (Choose two.)

  A. SNMP v1
  B. SSH
  C. SNMP write community string
  D. CDP
  E. SNMP v3
  C. SNMP write community string
  E. SNMP v3

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/net_mgmt/prime/infrastructure/3-2/admin/guide/bk_CiscoPrimeInfastructure_3_2_AdminGuide/bk_CiscoPrimeInfastructure_3_2_AdminGuide_chapter_01001.html

• Question 104:

  Which customizable security report on Cisco Prime Infrastructure would show rogue APs detected since a point in time?

  A. New Rogue APs
  B. Network Summary
  C. Rogue APs
  D. Rogue AP Count Summary
  C. Rogue APs

• Question 105:

  Which three authentication methods correctly describe digital certificate requirements when using EAP-TLS authentication? (Choose three.)

  A. The client does not need the corresponding private key.
  B. The EAP-TLS is sent in cleartext when the root certificate is not installed
  C. The subject name in the certificate must correspond to the user account name.
  D. EAP-TLS requires a root certificate but not a user certificate.
  E. The certificate must be installed when the requested user is logged in to the machine.
  F. The certificate has to be X.509 Version 3.
  D. EAP-TLS requires a root certificate but not a user certificate.
  E. The certificate must be installed when the requested user is logged in to the machine.
  F. The certificate has to be X.509 Version 3.

  ---

  Reference: https://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a008009256b.shtml

  The certificate has to be X.509 Version 3 EAP-TLS Machine Authentication requires both Active Directory and an Enterprise root CA. In order to acquire a certificate for EAP-TLS machine authentication, For a client (using Windows XP professional, for example) to authenticate using EAP-TLS, the client must obtain a personal client certificate. This certificate must meet several requirements: Figure 5-1. Client Certificate and the Enhanced Key Usage Field. The certificate has to be installed when the requested user is logged https://www.cisco.com/en/US/tech/tk722/tk809/technologies_white_paper09186a008009256b.shtml

• Question 106:

  Which protocol helps to find a rogue access point within the WLAN?

  A. RDLP
  B. PI
  C. MSE
  D. CCX
  A. RDLP

• Question 107:

  

  Refer to the exhibit. Which level message does the WLC send to the syslog server?

  A. syslog level errors and less severity messages
  B. syslog level error messages
  C. all syslog levels messages
  D. syslog level errors and greater severity messages
  D. syslog level errors and greater severity messages

• Question 108:

  DRAG DROP

  Drag the EAP Authentication type on the left to the accurate description provided on the right.

  Select and Place:

  

  

• Question 109:

  Which user role can access CMX Visitor Connect?

  A. Connect
  B. Power User
  C. Guest User
  D. Super Administrator
  D. Super Administrator

  ---

  Reference: https://www.cisco.com/c/en/us/td/docs/wireless/mse/7-6/CMX_Dashboard/Guide/Cisco_CMX_Dashboard_Config_Guide/CMX_Dashboard_Visitor_Connect.pdf

• Question 110:

  Which CLI command do you use on Cisco IOS XE Software to put the AP named Floor1_AP1 back in the default AP group?

  A. ap Floor1_AP1 ap-groupname default-group
  B. ap name Floor1_AP1 apgroup default-group
  C. ap name Floor1_AP1 ap-groupname default-group
  D. ap name Floor1_AP1 ap-groupname default
  C. ap name Floor1_AP1 ap-groupname default-group

  ---

  

  Reference: http://www.cisco.com/en/US/docs/switches/lan/catalyst3850/software/release/3.2_0_se/multibook/configuration_guide/b_multibook_config_guide_wireless_3850_chapter_0110.html