Cisco 300-365 Online Practice Questions and Exam Preparation

Cisco 300-365 Online Questions & Answers

• Question 11:

  What is the AQ sensitivity when the EDRRM is set to high?

  A. 60
  B. 35
  C. 40
  D. 50
  A. 60

  ---

  Explanation: The EDRRM AQ threshold value for low sensitivity is 35, medium sensitivity is 50, and high sensitivity is 60.

• Question 12:

  An engineer must reduce the amount of inter-controller roaming at a facility that has deployed N+1 high availability. Which strategy for performing this action is the best?

  A. Ensure all access points on the campus are configured with the same mobility group.
  B. Disable interface groups on the SSID.
  C. Ensure all access points in a geographic location are configured with the same primary WLC.
  D. Enable client load balancing on the SSID.
  C. Ensure all access points in a geographic location are configured with the same primary WLC.

• Question 13:

  Which value is the default Rx SOP threshold on a WLC?

  A. auto
  B. low
  C. medium
  D. high
  A. auto

• Question 14:

  A network administrator has had issues with clients giving out their username and password to other employees to authenticate to the internal wireless SSID. Which 802.1x authentication stops users from being able to share credentials?

  A. EAP-TLS
  B. EAP-MSCHAPv2
  C. LEAP
  D. EAP-FAST
  A. EAP-TLS

• Question 15:

  A wireless engineer must design a wireless mesh network for the courtyard at a local university to support a large number of students. Which description of how the engineer designs the mesh network to provide additional capacity is true?

  A. Configure multiple RAPs to support bridge mode.
  B. Configure multiple RAPs on different channels.
  C. Configure multiple RAPs to support hardware diversity.
  D. Configure multiple RAPs with different antennas.
  C. Configure multiple RAPs to support hardware diversity.

• Question 16:

  A customer is concerned about the number of associations on the guest WLAN and wants to reduce load to ensure there are sufficient resources for the High Density WLAN. Which configuration setting meets this need?

  A. Change the QoS profile of the guest WLAN to Bronze.
  B. Set a low Maximum Allowed Clients on the Guest WLAN.
  C. Configure MFP client protection on the high density WLAN.
  D. Enable DHCP Profiling and restrict guest devices using a policy map.
  B. Set a low Maximum Allowed Clients on the Guest WLAN.

• Question 17:

  After implementing mDNS gateway, a school's network administrator notices that mDNS wireless printers are available over the whole network. Which feature can the admin use to restrict the printer mDNS advertisements to the AP that the printer is joined to and adjacent APs?

  A. mDNS-AP
  B. SSO
  C. LSS
  D. Priority MAC
  A. mDNS-AP

• Question 18:

  An engineer must deploy FlexConnect APs to a site that typically has 300 ms latency to the WLC. Which typical operating mode must the engineer plan on for normal operations?

  A. local authentication, local switching
  B. central authentication, central switching
  C. central authentication, local switching
  D. connected mode
  A. local authentication, local switching

  ---

  References: http://www.cisco.com/c/en/us/td/docs/wireless/controller/7-2/configuration/guide/cg/cg_flexconnect.html

• Question 19:

  What is the maximum number of monitor reports that can be created by using Cisco AVC and Cisco Prime Infrastructure?

  A. 10
  B. 20
  C. 30
  D. 40
  C. 30

• Question 20:

  A network engineer observes a spike in controller CPU overhead and overall network utilization after enabling multicast on a controller with 500 APs. What feature is necessary to correct the issue?

  A. controller IGMP snooping
  B. unicast AP Multicast Mode
  C. broadcast forwarding
  D. multicast AP Multicast Mode
  B. unicast AP Multicast Mode

  ---

  References: http://www.cisco.com/c/en/us/td/docs/wireless/controller/8-0/configuration-guide/b_cg80/b_cg80_chapter_01011.pdf