Cisco 300-160 Online Practice Questions and Exam Preparation

Cisco 300-160 Online Questions & Answers

• Question 401:

  Your customer has asked you to recommend a data center storage design that includes Multihop FCoE for 400 database servers running on Cisco UCS C460M2 Rack Servers with Cisco UCS VIC 1225. Which of these server connectivity options is Cisco recommended for scalability and cost-effectiveness?

  A. Server > Cisco Nexus 5548UP > Cisco Nexus 7018 > CISCO MDS 9500
  B. Server > Cisco Nexus 3548 > Cisco Nexus 7018 > CISCO MDS 9500
  C. Server > Cisco Nexus 2232PP > Cisco Nexus 7018 > CISCO MDS 9500
  D. Server > Cisco Nexus 4001i > Cisco Nexus 7018 > CISCO MDS 9500
  C. Server > Cisco Nexus 2232PP > Cisco Nexus 7018 > CISCO MDS 9500

• Question 402:

  Which two statements about OTV are true? (Choose two.)

  A. OTV join interfaces must be physical interfaces.
  B. OTV supports authentication of hello messages and control plane PDUs.
  C. Multicast support in the transport network is a strict requirement to establish OTV adjacencies.
  D. All OTV overlay interfaces must use the same join interface.
  E. OTV forwards and processes spanning-tree BPDUs between sites to ensure a loop-free topology.
  F. OTV propagates MAC address reachability information via the underlying IS-IS control-plane.
  B. OTV supports authentication of hello messages and control plane PDUs.
  F. OTV propagates MAC address reachability information via the underlying IS-IS control-plane.

• Question 403:

  Which option accurately describes the OSPF Graceful Restart feature in Cisco NX-OS?

  A. keeps the control plane state active during an OSPF process restart
  B. shuts down the OSPF process gracefully to replace the router
  C. prevents the OSPF process from restarting when the process crashes
  D. allows a router to remain in the data forwarding path during an OSPF process restart
  D. allows a router to remain in the data forwarding path during an OSPF process restart

• Question 404:

  Which statement about FCoE is true?

  A. FCoE is not supported on any Nexus 2000 Series Fabric Extenders.
  B. Not a single FCoE VLAN can map to multiple VSANs.
  C. Inter-switch FCoE links can be configured to carry multiple VSANs.
  D. FCoE does not support NPV/NPIV mode.
  C. Inter-switch FCoE links can be configured to carry multiple VSANs.

• Question 405:

  

  Which item represents a hardware requirement on the Cisco Nexus 7000 to terminate FCoE hosts? (Choose one.)

  A. F1 Series 10Gb Ethernet module
  B. M2 Series 10Gb Ethernet module
  C. X1 Series 10Gb Unified Fabric module
  D. C2 Series 10Gb Service module
  A. F1 Series 10Gb Ethernet module

• Question 406:

  Which two options are requirements to implement the Route Health Injection feature in a data center? (Choose two.)

  A. a Layer 2 connection between the service chassis and the aggregation switch
  B. firewall services enabled on a Cisco Catalyst 6500 Series Switch
  C. a routing protocol configured between the service chassis and the aggregation switch
  D. integrated services enabled on a Cisco Nexus 5000 Series Switch
  E. integrated services enabled on a Cisco Catalyst 6500 Series Switch
  A. a Layer 2 connection between the service chassis and the aggregation switch
  E. integrated services enabled on a Cisco Catalyst 6500 Series Switch

• Question 407:

  Which two options represent an access layer solution to virtual machine network virtualization that the network team manages just like other devices in the data center? (Choose two.)

  A. Cisco Nexus 1010
  B. VSM
  C. VEM
  D. host vPC
  E. MPIO
  A. Cisco Nexus 1010
  C. VEM

• Question 408:

  

  Which three items represent features of VM-FEX with Cisco Nexus 1000V? (Choose three)

  A. Software packet switching
  B. Hardware packet switching
  C. 802.1 Q
  D. VN-Tag (802.1 Qbh)
  E. Feature rich
  F. High performance
  B. Hardware packet switching
  E. Feature rich
  F. High performance

• Question 409:

  Which item uses TCP as a block I/O transport?

  A. NFS v4
  B. HyperTransport
  C. AoE
  D. FCoE
  E. CIFS
  F. iSCSI
  F. iSCSI

• Question 410:

  Which option must be enabled to allow line-rate forwarding on a Fibre Channel port?

  A. F port
  B. TEport
  C. dedicated mode
  D. shared mode
  E. E port
  C. dedicated mode