Cisco 300-160 Online Practice Questions and Exam Preparation

Cisco 300-160 Online Questions & Answers

• Question 241:

  

  Which two items represent features of VM-FEX with Cisco Nexus 5500? (Choose two)

  A. Software packet switching
  B. Hardware packet switching
  C. 802.1 Q
  D. VN-Tag (802.1 Qbh)
  E. Feature rich
  F. Higher performance
  B. Hardware packet switching
  D. VN-Tag (802.1 Qbh)

• Question 242:

  Which statement accurately describes Ethernet switching mode on a Cisco UCS Fabric Interconnect?

  A. VTP is enabled on the Fabric Interconnect
  B. PVST+ runs on the Fabric Interconnect.
  C. The uplink ports are placed in a Rapid PVST+ edge trunk state
  D. The vNiCs can be configured for failover
  B. PVST+ runs on the Fabric Interconnect.

• Question 243:

  In order to provide a specific UCS B-Series blade access to a dedicated uplink on a Fabric interconnect with multiple uplinks connected, which item must to be configured?

  A. vNIC placement policy
  B. IOM Port Group
  C. Static Pinning Policy
  D. LAN Pin Group
  D. LAN Pin Group

• Question 244:

  You are designing the network topology for a data center that must have a maximum delay of 1.6 microseconds within the data center. Which two options are possible switching platforms for the data center? (Choose two.)

  A. Cisco Nexus 4000 Series
  B. Cisco Nexus 7000 Series
  C. Cisco Catalyst 3580 Series
  D. Cisco Nexus 3000 Series
  E. Cisco Catalyst 6500 Series
  A. Cisco Nexus 4000 Series
  B. Cisco Nexus 7000 Series

• Question 245:

  Your customer is designing a new data center and would like the aggregation layer to be able to route and have Layer 3 capability. What Cisco platform will meet this requirement?

  A. Cisco Nexus 1000v--no advantages to this model
  B. Cisco Nexus 5596 without Layer 3 daughter card
  C. Cisco MDS 9506 chassis with supervisor engine
  D. Cisco Nexus 7010 switch with Enterprise Services Package
  D. Cisco Nexus 7010 switch with Enterprise Services Package

• Question 246:

  Which two items represent data center virtualization technologies? (Choose two.)

  A. ECMP
  B. GLBP
  C. LUN
  D. VSAN
  E. L2 firewall
  C. LUN
  D. VSAN

• Question 247:

  You plan to use vPC+ in a FabricPath topology. What are two characteristics of a vPC+ switch ID? (Choose two.)

  A. must he set to 255
  B. must be set manually
  C. can be reused in the FabricPath topology
  D. must be the same on each vPC+ peer
  E. must be different on each vPC+ peer
  C. can be reused in the FabricPath topology
  D. must be the same on each vPC+ peer

• Question 248:

  Which three actions can be performed in a data center access layer based on a unified fabric? (Choose three.)

  A. QoS traffic classification
  B. QoS traffic queuing
  C. routing summarization
  D. IGMP snooping
  E. routing redistribution
  F. traffic compression
  A. QoS traffic classification
  B. QoS traffic queuing
  D. IGMP snooping

• Question 249:

  Given the requirements, which Cisco Nexus product is Cisco recommended?

  A rich feature set that makes it well suited to top-of-rack, middle-of-row, or end-of-row access-layer applications.

  Data center racks with standards-based 1 and 10 Gigabit Ethernet and FCoE features, and virtual machine awareness features that allow IT departments to consolidate networks.

  A combination of high port density, lossless Ethernet, wire-speed performance, and extremely low latency that makes the switch family well suited to meet the growing demand for 10 Gigabit Ethernet.

  A. 1000v
  B. 1010
  C. 2000
  D. 3000
  E. 4000
  F. 5500
  F. 5500

• Question 250:

  Which Cisco ACE Service Module deployment topology allows direct access to the servers for administration but requires either SNAT or PBR for load-balanced HTTP traffic returning from the server?

  A. Transparent
  B. One-Arm
  C. Routed
  D. Inline
  E. Asymmetric Server Normalization
  B. One-Arm