Cisco 300-160 Online Practice Questions and Exam Preparation

Cisco 300-160 Online Questions & Answers

• Question 181:

  Which statement accurately describe the allocation of IP pool for out of Band management of cisco?

  A. A maximum of eight OOB IP address can be configure to access the CIMC on the server
  B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port
  C. A maximum of Sixteen OOB IP address can be configure to access the CIMC on the server
  D. The management IP address used to access CIMC on a server can be out of band address the inter connect via the Management port
  B. The management IP address used to access CIMC on a server can be out of band address the inter connect via the fabric uplink port

• Question 182:

  Which type of 40 Gigabit Ethernet optics should be used for interconnect when the number of multimode fiber strands used should be kept as low as possible?

  A. 40GBASE-SR4
  B. 40GBASE-LR4-Lite
  C. 40GBASE-SR-BiDi
  D. 40GBASE-CR4
  C. 40GBASE-SR-BiDi

• Question 183:

  Which statement accurately describes VSAN-based QoS when the same flow is present in two class maps that are associated to a policy map?

  A. The highest QoS value is used.
  B. The lowest QoS value is used.
  C. The QoS value of the class map that is attached first takes effect.
  D. The QoS value of the class map that is attached last takes effect.
  C. The QoS value of the class map that is attached first takes effect.

• Question 184:

  

  

  Give the above configuration example answer the following question. What is the number of Core Processors installed?

  A. 1
  B. 2
  C. 4
  D. 6
  B. 2

• Question 185:

  if you are connecting a Cisco UCS Fabric Interconnect in it's default mode to a SAN, what is the operating mode?

  A. trunk
  B. NPIV mode
  C. switching
  D. NPV mode
  D. NPV mode

• Question 186:

  Which two STP port types are available in Cisco NX-OS? (Choose two.)

  A. normal
  B. edge
  C. blocked
  D. root
  E. point-to-point
  A. normal
  B. edge

• Question 187:

  Which item is a component of Cisco DCNM?

  A. Cisco DCNM for SAN and Cisco DCNM for LAN
  B. Cisco DCNM for Cisco UCS Manager
  C. Cisco DCNM for B- and C-Series servers
  D. Cisco DCNM FabricPath license
  A. Cisco DCNM for SAN and Cisco DCNM for LAN

• Question 188:

  Which three parameters must be defined when you create a server profile in Cisco UCS? (Choose three.)

  A. UUID
  B. the vNIC and vHBA identity values
  C. the boot order
  D. the type of operating system
  E. the iSCSI qualified name
  F. the bandwidth
  A. UUID
  B. the vNIC and vHBA identity values
  C. the boot order

• Question 189:

  Which two technologies can be used to minimize routing on the DC Core layer from being compromised? (Choose two.)

  A. policy-based routing
  B. route peer authentication
  C. route filtering
  D. route summarization
  E. routeredistribution
  C. route filtering
  D. route summarization

• Question 190:

  Which statement accurately describes the configuration requirements for disjoint Layer 2 networks on Cisco UCS?

  A. The Cisco UCS fabric Interconnect must be in switch mode.
  B. The VLAN IDs must overlap in both Layer 2 domains.
  C. All of the uplinks most be in one port channel to keep all of the ports active.
  D. The Cisco UCS Fabric Interconnect must be in end-host motto.
  D. The Cisco UCS Fabric Interconnect must be in end-host motto.