Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 81:

  An administrator is setting up analog phones that connect to a Cisco VG310. Which type of gateway or trunk on Cisco Unified Communication Manager for the Cisco VG310 must the administrator set up to allow the phones to have the call pickup feature?

  A. H.323 gateway
  B. SCCP gateway
  C. H.225 trunk
  D. MGCP gateway
  E. SIP trunk
  B. SCCP gateway

• Question 82:

  An engineer is troubleshooting a dial path etc" and it gives a config snapshot.

  There are three fields populated with "CCNPCOLAB", "Add Suffix" and "@Cisco.com"

  Mode : .....

  Pattern type : Regex

  Pattern string : @cisco.com

  Pattern Behaviour :.......

  Replace string : ccnpcollab

  Target : .....

  State : Disabled

  A. Can not route call
  B. Sent to Cisco.com
  C. sent as CCNPCOLAB
  D. Sent as [email protected]
  C. sent as CCNPCOLAB

• Question 83:

  Refer to the exhibit.

  

  The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit.

  What should the AAR group prefix be?

  A. 9
  B. 91
  C. none
  D. +
  E. +1
  C. none

• Question 84:

  While troubleshooting a connectivity issue between Cisco Unified Communications Manager, Expressway-C, and Expressway-E, an engineer sees this output in the Expressway-E logs:

  Event="Authentication Failed" Service="SIP" Src-ip="10.50.2.1" Src-port="25723" Detail="Incorrect authentication credential for user" Protocol "TLS" Method="OPTIONS" Level="1"

  What is the cause of this issue?

  A. The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Zone username/password.
  B. The Expressway-C Traversal Client username/password do not match the Expressway-E Traversal Server username/password.
  C. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal Zone username/password.
  D. The Expressway-C Traversal Zone username/password do not match the Expressway-E Traversal Client username/password.
  E. The Expressway-C Traversal Server username/password do not match the Expressway-E Traversal Client username/password.
  B. The Expressway-C Traversal Client username/password do not match the Expressway-E Traversal Server username/password.

• Question 85:

  Which configuration for setting the IP DSCP value in the ToS byte to 5 and Expedited Forwarding is correct?

  A. policy-map policy1 class class1 set ip dscp 5 class class2 set ip dscp ef
  B. policy-map policy1 class class1 set ip dscp 3 class class2 set ip dscp ef
  C. policy-map policy1 class class1 set ip dscp ef class class2 set ip dscp 5
  D. policy-map policy1 class class1 set ip dscp 5 class class2 set ip dscp CS3
  A. policy-map policy1 class class1 set ip dscp 5 class class2 set ip dscp ef

• Question 86:

  Which statement about the function of a gatekeeper is true?

  A. A gatekeeper improves call routing between servers within a single Cisco Unified Communications Manager cluster.
  B. A gatekeeper can replace the dial plan of a Cisco Unified Communications Manager cluster.
  C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters.
  D. Gatekeepers can be implemented to deploy RSVP-based CAC.
  C. A gatekeeper can simplify the dial plan between many different Cisco Unified Communications Manager clusters.

• Question 87:

  What is required to effectively use the Cisco CTL client to activate security in an IP telephony network?

  A. H.323 gateway
  B. Security Tokens
  C. IPSEC
  D. Secure SRST
  B. Security Tokens

• Question 88:

  Which two configuration items must you verify when a Cisco Unified IP Phone fails to register to the secondary Call Manager server? (Choose two.)

  A. Date/Time Group Configuration
  B. Cisco Unified CM Group Configuration
  C. Application Server Configuration
  D. Device Pool Configuration
  E. SRST Reference Configuration
  B. Cisco Unified CM Group Configuration
  E. SRST Reference Configuration

• Question 89:

  Which process can localize a global E.164 with + prefix calling numbers for inbound calls to an IP phone so that users see the calling number in a local format?

  A. Calling number localization is done using translation patterns.
  B. Calling number localization is done using route patterns.
  C. Calling number localization is done by configuring a calling party transformation CSS at the phone.
  D. Calling number localization is done by configuring a calling party transformation CSS at the gateway.
  E. Calling number localization is done by configuring the phone directory number in a localized format.
  C. Calling number localization is done by configuring a calling party transformation CSS at the phone.

• Question 90:

  Which action configures CAC utilizing only Cisco Unified Communications Manager software?

  A. Configure Cisco Unified Communications Manager regions.
  B. Configure Cisco Unified Communications Manager locations.
  C. Configure Cisco Unified Communications Manager RSVP-enabled locations.
  D. Configure Cisco Unified Communications Manager MTPs.
  B. Configure Cisco Unified Communications Manager locations.