300-075 Exam Details

  • Exam Code
    :300-075
  • Exam Name
    :Implementing Cisco IP Telephony and Video
  • Certification
    :Cisco Certifications
  • Vendor
    :Cisco
  • Total Questions
    :522 Q&As
  • Last Updated
    :Dec 10, 2021

Cisco 300-075 Online Questions & Answers

  • Question 101:

    Refer to the exhibit.

    The exhibit shows a SAF Forwarder configuration attached to a Cisco Unified Communications Manager.

    Which minimum configuration for a Cisco Unified Communications Manager Express SAF Forwarder is needed to establish a SAF neighbor relationship with this SAF Forwarder?

    A. router eigrp SAF i service-family ipv4 autonomous-system 1 ! topology base exitsf-topology exitservice-family voice service saf profile trunkroute 1 session protocol sip interface Loopback1 transport tcp port 5060 !
    B. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exitsf-topology exitservice-family ! voice service saf profile trunk-route 1 session protocol sip interface Loopback1 transport tcp port 5060 ! profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx ! profile callcontrol 1 dnservice trunk-route 1 dn-block 1 dn-block 2 ! channel 1 vrouter SAF asystem 1 subscribe callcontrol wildcarded publish callcontrol 1 !
    C. router eigrp SAF ! service-family ipv4 autonomous-system 1 ! topology base exit-sf-topology exit-service-family !
    D. None of above configurations contain sufficient information.

  • Question 102:

    Refer to the exhibit.

    The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. Assuming the PSTN does not accept globalized numbers with + prefix.

    What should the Called Party Transformation Pattern at the U.S. gateway be configured as?

    A. \+.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: +
    B. \+1.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: None
    C. \+408.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: 1
    D. \+1408.! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: None
    E. \+1.408! with the following Called Party Transformation: Discard Digits PreDot Prefix Digits Outgoing Calls: None

  • Question 103:

    Refer to the exhibit.

    An engineer has configured SAF in a Cisco Unified Communications Manager. The initial configuration has SAF1 registered as the primary. Which statement about what happens if SAF1 becomes unreachable and then the connection to SAF1 is restored is true?

    A. SAF2 is elected as the primary SAF, and SAF3 is elected as the backup. SAF1 becomes the third SAF when the connection is restored.
    B. SAF2 is elected as the primary SAF, and SAF1 is elected as the backup. SAF1 becomes the primary again when the connection is restored.
    C. SAF2 is elected as the primary SAF, and SAF3 is elected as the backup. SAF2 stays primary when the connection is restored.
    D. SAF2 and SAF3 are both elected as primary, and SAF1 is elected as the backup.

  • Question 104:

    Refer to the exhibit.

    HQ_MRGL is assigned to the HQ IP phones. BR_MRGL is assigned to the BR IP phones. The remote site BR IP phones support only the G.711 codec. Where should the transcoder reside?

    A. The transcoder should reside at the HQ site and assigned to HQ_MRG.
    B. The transcoder should reside at the BR site and assigned to BR_MRG.
    C. The transcoder should be assigned to its own MRG, which should then be assigned to the default device pool.
    D. A transcoder is not needed. The HQ phones will automatically change over to the G.711 codec.

  • Question 105:

    An engineer is deploying a new Cisco VCS Expressway for a company and has configured the IP address and the system name. After logging into the Cisco VCS Expressway admin page, the engineer sees this output. Which option must be configured to complete the Cisco VCS Expressway system configuration?

    A. Cisco Unified Communications Manager IP address
    B. LDAP server
    C. DHCP server
    D. DNS server

  • Question 106:

    Refer to the exhibit.

    How does the Cisco Unified Communications Manager advertise dn-block 1?

    A. 4XXX and the ToDID will 0:
    B. 4XXX and the ToDID will 0:1972555
    C. 4XXX
    D. 4XXX and the ToDID will 0:+ 1972555
    E. 19725554XXX

  • Question 107:

    Which Cisco IOS command is used to verify that the Cisco Unified Communications Manager Express has registered with the SAF Forwarder?

    A. show eigrp service-family ipv4 clients
    B. show eigrp address-family ipv4 clients
    C. show voice saf dndb all
    D. show saf registration
    E. show ip saf registration

  • Question 108:

    An engineer must configure a new Audio Codec Preference list for a new site in their network. Which type of list does this configuration establish?

    A. ordered list of preferred Audio Codecs used in Locations
    B. ordered list of preferred Audio Codecs used in Device Mobility Groups
    C. ordered list of preferred Audio Codecs used in Device Pools
    D. ordered list of preferred Audio Codecs used in Regions

  • Question 109:

    An administrator is visiting a remote site that has on-net calls with headquarters and one voice gateway for PSTN calls. When using RTMT to monitor the bandwidth utilization of the remote site, the administrator notices the OutOfResources counter for the site in LBM has been increasing slowly in last two weeks, but no call failure reports have been sent from this site. Which description about this issue is true?

    A. The bandwidth settings of the site are fulfilling on-net call volume.
    B. AAR is routing some of the calls.
    C. The location-based CAC does not work properly.
    D. The LBM service is malfunctioning.

  • Question 110:

    How many Cisco Unified Mobility destinations can be configured per user?

    A. 1
    B. 10
    C. 4
    D. 6

Tips on How to Prepare for the Exams

Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Cisco exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 300-075 exam preparations and Cisco certification application, do not hesitate to visit our Vcedump.com to find your solutions here.