Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 421:

  Drag and drop the Cisco Unified Communications Manager default DSCP values from the left onto the correct traffic types on the right.

  Select and Place:

  

  

• Question 422:

  What is a prerequisite of AAR deployment?

  A. You must have a single distributed call processing deployment.
  B. Calls must be manually rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.
  C. Calls must be automatically rerouted through the PSTN or other networks when Cisco Unified Communications Manager blocks a call due to insufficient location bandwidth.
  D. Clustering must be implemented over the WAN.
  E. You must have a centralized call processing deployment.
  E. You must have a centralized call processing deployment.

• Question 423:

  When Cisco Extension Mobility is implemented, how is the audio source for the MOH selected?

  A. The audio source that is configured at the user device profile is selected.
  B. The audio source that is configured at the home phone of the user is selected.
  C. The audio source that is configured at the physical phone used for the Cisco Extension Mobility login is selected.
  D. The audio source that is configured in the IP Voice Media Streaming parameters is selected.
  A. The audio source that is configured at the user device profile is selected.

• Question 424:

  Which two types of trunks can support Cisco Unified Communications Manager? (Choose two.)

  A. switch port trunks
  B. PIMG trunks
  C. SIP trunks
  D. H.225 trunks
  E. CO trunks
  F. POTS trunks
  C. SIP trunks
  D. H.225 trunks

• Question 425:

  An update of the configuration using the Cisco CTL client not needed when _______.

  A. a Cisco Unified CallManager has been removed
  B. an LSC of the IP phone is upgraded
  C. a security token is added to the system
  D. an IP address of the Cisco TFTP server has been changed
  B. an LSC of the IP phone is upgraded

• Question 426:

  Refer to the exhibit.

  

  Multicast MOH needs to be run from flash at the remote site. Which Cisco IOS configuration at the SRST router is correct?

  A. ! call-manager-fallback ip source-address 10.1.5.102 port 2000 max-ephones 2 max-dn 8 dual-line moh music-on-hold au multicast moh 239.1.1.1 port 16384
  B. ! call-manager-fallback ip source-address 10.1.5.102 port 2000 max-ephones 2 max-dn 8 dual-line moh music-on-hold au multicast moh 239.1.1.1 port 163t
  C. call-manager-fallback ip source-address 10.1.120.1 port 2000 max-ephones 2 max-dn 8 moh music-onhold.au multicast moh 239.1.1.1 port 32767
  D. ! call-manager-fallback ip source-address 10.1.5.102 port 2000 max-ephones 2 max-dn 8 dual-line moh music-on-hold an multicast moh 239.1.1.1 port 32767
  A. ! call-manager-fallback ip source-address 10.1.5.102 port 2000 max-ephones 2 max-dn 8 dual-line moh music-on-hold au multicast moh 239.1.1.1 port 16384

• Question 427:

  Cisco Unified border element is configured to support RSVP-based CAC. When is the RSVP path and reservation message sent and received?

  A. Immediately after the call setup message is received and the reservation message is received after H.245 capabilities negotiation is completed.
  B. The path and reservation messages are sent and received after the H.245 capabilities negotiation is completed.
  C. The path and reservation messages are sent and received immediately after the call setup message is received.
  D. The path is setup once the global command call rsvp-sync is configured.
  C. The path and reservation messages are sent and received immediately after the call setup message is received.

• Question 428:

  A CUCM end user with Extension Mobility is associated with an 8851 phone and 8851 device profile. However, the user logs into a Cisco 8941, which device profile will be used?

  A. 8941 default device profile
  B. 8851 default device profile
  C. the 8851 device profile
  D. universal device profile
  D. universal device profile

• Question 429:

  Scenario:

  There are two call control systems in this item.

  The Cisco UCM is controlling the Cisco Jabber for Windows Client, and the 7965 and 9971 Video IP Phone.

  The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows.

  DP:

  

  Locations:

  

  CSS:

  

  Movie Failure:

  

  Movie Settings:

  

  CIPTV2 Topology:

  

  Subzone:

  

  Links:

  

  Pipe:

  

  Both of the Cisco TelePresence Video for Windows clients are able to log into the server but can't make any calls. After reviewing the exhibits, which of the following reasons could be causing this failure?

  A. Wrong username and/or password.
  B. Wrong SIP domain name.
  C. The TMSPE is not working.
  D. The bandwidth is incorrectly configured.
  D. The bandwidth is incorrectly configured.

• Question 430:

  Which of the following are two functions that ensure that the telephony capabilities stay operational in the remote location Cisco Unified SRST router? (Choose two.)

  A. Automatically detecting a failure in the network.
  B. Initiating a process to provide call-processing backup redundancy.
  C. Notifying the administrator of an issue for manual intervention.
  D. Proactively repairing issues in the voice network.
  A. Automatically detecting a failure in the network.
  B. Initiating a process to provide call-processing backup redundancy.