Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 191:

  If the device pool in the phone record does not match the device pools in the matching subnet, what will the system consider the phone to be?

  A. roaming
  B. unregistered
  C. unknown
  D. new device
  A. roaming

• Question 192:

  Which two options are effective mechanisms to restrict the maximum number of voice calls on a WAN link? (Choose two.)

  A. Configure a gatekeeper with an SIP trunk.
  B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications Manager with bandwidth control.
  C. Configure Cisco Unified Communications Manager regions.
  D. Configure Cisco Unified Communications Manager locations.
  B. Configure a gatekeeper and a gatekeeper-controlled trunk in Cisco Unified Communications Manager with bandwidth control.
  D. Configure Cisco Unified Communications Manager locations.

• Question 193:

  Refer to the exhibit.

  

  Which statement is true?

  A. Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.
  B. If the VCS receives a call to an unknown IP address, it queries its neighbors for the remote address and if permitted, it routes the call through the neighbor.
  C. Endpoints that are registered directly to the VCS can call only an IP address of a system that is also registered directly to that VCS.
  D. Dialing by IP address is not supported on VCS.
  A. Endpoints can make calls to unknown IP addresses without the VCS querying any neighbors.

• Question 194:

  When configuring a video ISDN gateway, which two actions are requirements for the Cisco Preferred Architecture for Enterprise Collaboration? (Choose two.)

  A. Use SIP instead of H.323.
  B. Perform dial string manipulation on Cisco Unified Communications Manager.
  C. Use an * (asterisk) at the end of each ISDN number, as a suffix.
  D. Use an ! (exclamation point) at the end of each ISDN number, as a suffix.
  E. Use H.323 instead of SIP.
  A. Use SIP instead of H.323.
  B. Perform dial string manipulation on Cisco Unified Communications Manager.

• Question 195:

  Refer to the following exhibits.

  

  

  Users in the U.S dial Germany by calling 9011 49 followed by the remaining digits. What would be the most suitable configuration for Connection X?

  A. Configure a SIP trunk to 10.140.1.1 and a SIP route pattern +49T in Cisco Unified Communications Manager.
  B. Configure a SIP trunk to the Cisco Unified Border Element and route pattern +49T in Cisco Unified Communications Manager.
  C. Configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.
  D. Configure a SIP trunk to the ITSP. Configure a translation pattern for 9011.49T using DDI predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.
  C. Configure a SIP trunk to the Cisco Unified Border Element. Configure a translation pattern for 9011.49T using DDI Predot prefix + and CSS to point to a route pattern partition \+! which uses the SIP trunk.

• Question 196:

  Which two Cisco Unified Communications Manager trunk types are supported when configuring Service Advertisement Framework Call Control Discovery? (Choose two.)

  A. H.225 trunk (gatekeeper controlled)
  B. SIP trunk
  C. intercluster trunk (nongatekeeper controlled)
  D. intercluster trunk (gatekeeper controlled)
  E. T1/E1 PRI trunk
  B. SIP trunk
  C. intercluster trunk (nongatekeeper controlled)

• Question 197:

  Which two default SCCP keep-alive intervals are generated from a phone to a Cisco Unified Communications Manager server? (Choose two.)

  A. The phone sends a SCCP keep-alive to the backup server every 60 seconds.
  B. The phone sends a SCCP keep-alive to the backup server every 30 seconds.
  C. The phone sends a SCCP keep-alive to the primary server every 30 seconds.
  D. The phone sends a SCCP keep-alive to the tertiary server every 90 seconds.
  E. The phone sends a SCCP keep-alive to the primary server every 10 seconds.
  A. The phone sends a SCCP keep-alive to the backup server every 60 seconds.
  C. The phone sends a SCCP keep-alive to the primary server every 30 seconds.

• Question 198:

  Which action configures transcoding resources in Cisco Unified Communications Manager to function with branch office Cisco IP Phones?

  A. Configure the branch office IP phones with CSS and partitions.
  B. Configure the branch office IP phones with MRGs and MRGLs.
  C. Configure the branch office IP phones with regions.
  D. Configure the branch office IP phones with locations.
  B. Configure the branch office IP phones with MRGs and MRGLs.

• Question 199:

  Which two configurations provide the best SIP trunk redundancy with Cisco Unified Communications Manager? (Choose two.)

  A. Configure all SIP trunks with DNS SRV
  B. Configure all SIP trunks with Cisco Unified Border Element
  C. Configure all SIP trunks to point to a SIP gateway
  D. Configure SIP trunks to be members of route groups and route lists
  E. Configure all SIP trunks to allow TCP ports 5060
  F. Configure all SIP trunks to point to a gatekeeper through SIP to H.323 gateway
  A. Configure all SIP trunks with DNS SRV
  D. Configure SIP trunks to be members of route groups and route lists

• Question 200:

  Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server?

  A. ccm-manager switchover-to-backup
  B. mgcp use backup
  C. ccm-manager register backup
  D. not supported
  A. ccm-manager switchover-to-backup