Cisco 300-075 Online Practice Questions and Exam Preparation

Cisco 300-075 Online Questions & Answers

• Question 111:

  Which Cisco Unified Mobility setting enables or disables an incoming call to ring the desk phone and the remote destination at the same time?

  A. Mobility Profile
  B. Answer Too Soon timer
  C. Remote Destination Profile
  D. Enable Mobile Connect
  D. Enable Mobile Connect

• Question 112:

  Which two call scenarios are supported by AAR? (Choose two.)

  A. calls with CTI route points as the origin or destination of calls
  B. calls from Cisco Unified Communications Manager Extension Mobility users who roam to different sites
  C. calls from remote sites where SRST is activated
  D. calls originating from an IP phone within one location which terminates at an IP phone within another location
  E. calls incoming through a gateway device within one location which terminates at an IP phone within another location
  D. calls originating from an IP phone within one location which terminates at an IP phone within another location
  E. calls incoming through a gateway device within one location which terminates at an IP phone within another location

• Question 113:

  Which two statements describe RSVP-enabled locations-based CAC? (Choose two.)

  A. RSVP can be enabled selectively between pairs of locations.
  B. Using RSVP for CAC simply allows admitting or denying calls based on a logical configuration that is ignoring the physical topology.
  C. RSVP is topology aware, but only works with full mesh networks.
  D. An RSVP agent is a Media Termination Point that the call has to flow through.
  E. RSVP and RTP are used between the two endpoints.
  A. RSVP can be enabled selectively between pairs of locations.
  D. An RSVP agent is a Media Termination Point that the call has to flow through.

• Question 114:

  Refer to the exhibit.

  

  Assume that NANP is being used and 9 is used for PSTN access code Long distance national calls are preceded with 1.

  How should the HQ Cisco Unified Communications Manager be configured for calls to 3XXX to be sent to the gatekeeper at 1 0 1 6 1 with PSTN backups?

  A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups. The first route group contains the H 225 trunk. The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.
  B. Configure a route pattern for 1#3XXX Assign this route pattern to a route list that points to a route group that lists the H 225 trunk as first choice and the MGCP gateway as a second choice.
  C. Configure a route pattern for 4085543XXX. Assign this route pattern to a route list that points to two route groups. The first route group contains the H 226 trunk. The second route group contains MGCP gateway.
  D. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups. The first route group contains the H 225 trunk. The second route group contains MGCP gateway with prefix digits 91 408554 for the called number.
  A. Configure a route pattern for 3XXX Assign this route pattern to a route list that points to two route groups. The first route group contains the H 225 trunk. The second route group contains the MGCP gateway with prefix digits 1 408555 for the outgoing called number.

• Question 115:

  Which device is needed to integrate H.320 into the Cisco video solution?

  A. video gateway
  B. MGCP gateway
  C. H.323 gatekeeper
  D. MCU
  C. H.323 gatekeeper

• Question 116:

  Which statement about configuring the Cisco VCS Control and Cisco VCS Expressway is true?

  A. You do not need to configure search rules for traversal calls.
  B. You need to configure the firewall to allow communication from the Cisco VCS Expressway to the Cisco VCS Control.
  C. The username on the Cisco VCS Control and Cisco VCS Expressway are local and do not need to match.
  D. The Cisco VCS Expressway is the Traversal Server.
  D. The Cisco VCS Expressway is the Traversal Server.

• Question 117:

  Which statement is true regarding the configuration of SAF Forwarder?

  A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.
  B. The client label that is configured in Cisco Unified Communications Manager must match the configuration on the SAF Forwarder router.
  C. There should not be multiple nodes of Cisco Unified Communications Manager clusters acting as SAF clients.
  D. The destination IP address must match the loopback address of the SAF router.
  A. In a multisite dial plan, SAF Forwarders may exist in multiple autonomous systems.

• Question 118:

  Which two configurations are needed to implement SRST in Cisco Unified Communications Manager? (Choose two.)

  A. SRST Gateway setting in Cisco Unified Communications Manager
  B. SRST Reference configured in Cisco Unified Communications Manager
  C. Device Pool SRST Reference setting
  D. Call Manager Group setting
  E. Cisco Unified Communications Locations setting
  B. SRST Reference configured in Cisco Unified Communications Manager
  C. Device Pool SRST Reference setting

• Question 119:

  When you configure a region to use the G.729 codec, which other codecs can be utilized in the region?

  A. The region can use all the codecs supported by Cisco Unified Communications Manager.
  B. The region will use all of the codecs supported by Cisco Unified Communications Manager as long as a software Media Termination Point is available.
  C. The region will only use the codec configured in the region configuration field and any other codecs of equal or lower bandwidth.
  D. The region will use the configured codec and the default codec as long as it does not exceed the configured bandwidth for the region.
  C. The region will only use the codec configured in the region configuration field and any other codecs of equal or lower bandwidth.

• Question 120:

  Company X has a Cisco Unified Communications Manager cluster and a Cisco Unity Connection cluster at its head office and implemented SRST for its branch offices. One Monday at 2:00 pm, the WAN connection to a branch office failed and stayed down for 45 minutes. That day the help desk received several calls from the branch saying their voicemail was not working but they were able to make and receive calls.

  Why did the users not realize the WAN was down and prevented access to their voicemail?

  A. All the phones should have started ringing the instant the WAN connection failed to signal the start of SRST mode.
  B. All calls should have dropped when the WAN failed so users would be instantly aware.
  C. Although the phones were still working, the users should have noticed that the phone displays said "SRST Fallback Active".
  D. The voice administrators at the head office did not call the users to notify them.
  C. Although the phones were still working, the users should have noticed that the phone displays said "SRST Fallback Active".