Cisco 300-070 Online Practice Questions and Exam Preparation

Cisco 300-070 Online Questions & Answers

• Question 331:

  What is the maximum number of I080p30 HD Conference Participants if an MSE 8000 has four MSE8710 blades clustered?

  A. 48
  B. 180
  C. 720
  D. 800
  A. 48

• Question 332:

  Refer to the exhibit.

  

  Which conference resource is Conference 2 using assuming the MRGL has just been reset and all 6 conferences have become active?

  A. SW_CFB_3
  B. HW_CFB_2
  C. HW_CFB_1
  D. SW_CFB_2
  E. SW_CFB_1
  B. HW_CFB_2

• Question 333:

  Refer to the exhibit.

  

  What is the problem when 237 dials 972551915?

  A. The problem is in "forward-digits 7"; the dial peer should be with "forward-digits 9."
  B. The problem is in "forward-digits 7"; the dial peer should be with "forward-digits 5."
  C. The problem is in "forward-digits 7"; the dial peer should be with "forward-digits 2."
  D. The problem is in "forward-digits 7"; the dial peer should be with "forward-digits 8."
  D. The problem is in "forward-digits 7"; the dial peer should be with "forward-digits 8."

• Question 334:

  Which two options are forms of redundancy provided by Cisco Unified Communications Manager? (Choose two.)

  A. Media resource redundancy
  B. CTI redundancy
  C. Voice-mail redundancy
  D. Emergency responder redundancy
  A. Media resource redundancy
  B. CTI redundancy

• Question 335:

  What are the minimum configuration parameters required to manually add an IP phone to Cisco Unified Communications Manager?

  A. MAC address, device pool, and phone button template
  B. MAC address, user profile, phone security profile, and phone button template
  C. MAC address, device pool, phone security profile, and phone button template
  D. MAC address, device profile, user security profile, and phone button template
  C. MAC address, device pool, phone security profile, and phone button template

• Question 336:

  What are the two benefits of using SIP dial rules on an IP phone? (Choose two.)

  A. The phone can initiate dialing without sending any signaling messages to Cisco Unified Communications Manager.
  B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages to Cisco Unified Communications Manager.
  C. If dialed digits match an entry of a SIP dial rule, the dialed string is sent in a single SIP 200 OK message to Cisco Unified Communications Manager.
  D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remaining digits from the SIP phone to Cisco Unified Communications Manager one-by-one.
  E. If Cisco Unified Communications Manager requires more digits, another en bloc message is used to send the remaining digits from the SIP.
  B. The phone can detect invalid numbers and play a reorder tone without sending any signaling messages to Cisco Unified Communications Manager.
  D. If Cisco Unified Communications Manager requires more digits, KPML can be used to send the remaining digits from the SIP phone to Cisco Unified Communications Manager one-by-one.

• Question 337:

  An engineer has configured a comprehensive dial plan for a remote site with SRST on Cisco Unified Communications Manager. While simulating an outage for the site, the engineer discovers that a SRST phone cannot dial a long distance number. Which configuration component must be accessed to troubleshoot this issue?

  A. telephone registration configuration on SRST gateway
  B. route patterns on Cisco Unified CM
  C. dial peers on SRST gateway
  D. SRST configuration in Cisco Unified CM
  C. dial peers on SRST gateway

• Question 338:

  Which tool can you use to verify and troubleshoot a dial plan?

  A. Audit Log Configuration
  B. Dialed Number Analyzer
  C. CDR Analysis and Reporting
  D. Troubleshooting Trace Settings
  B. Dialed Number Analyzer

• Question 339:

  If the route patterns 5XXX, 51XX, 513X, and 5134 exist within a call route database, which pattern would be matched if the dialed number was 5124?

  A. 5XXX
  B. 51XX
  C. 513X
  D. 5134
  B. 51XX

• Question 340:

  Which two options can be used to configure digit manipulation for dial peers? (Choose two.)

  A. digit translation rules
  B. called party transformations
  C. route partitions
  D. forward digits
  E. route patterns
  A. digit translation rules
  D. forward digits