Cisco 300-070 Online Practice Questions and Exam Preparation

Cisco 300-070 Online Questions & Answers

• Question 1:

  An auto parts retailer would like its six service counter representatives to be able to assist both walk-up customers and telephone customers. Each store has six service counter representatives. Which call distribution algorithm will allow each service counter representative to provide the best customer service?

  A. Top Down
  B. Circular
  C. Longest Idle Time
  D. Broadcast
  D. Broadcast

• Question 2:

  If you want to change the default SCCP and SIP IP phone firmware loads a phone receives, in which location would you make this change?

  A. Device Pool
  B. Device Settings > Device Defaults
  C. Device Settings > Firmware Load Information
  D. Device Settings > Default Device Profile Configuration
  E. Device Settings > Device Profile
  F. Device Settings > Softkey Template
  B. Device Settings > Device Defaults

• Question 3:

  What are the two steps to configure NTP on a Cisco Unified Communications Manager publisher to support SCCP phones? (Choose two.)

  A. Restart the Unified Communications Manager services for the publisher and subscribers on the Unified CallManager Serviceability page.
  B. Configure Phone NTP References in Cisco Unified CM Administration.
  C. Configure time in Cisco Unified OS Administration.
  D. Configure the NTP server in Cisco Unified CM Administration.
  E. Configure the NTP server in Cisco Unified OS Administration.
  A. Restart the Unified Communications Manager services for the publisher and subscribers on the Unified CallManager Serviceability page.
  E. Configure the NTP server in Cisco Unified OS Administration.

• Question 4:

  IP Voice Media Stream Application service should be enabled on which server?

  A. Must enabled on dedicated server
  B. Only on one node
  C. Enable on gatekeeper
  D. Enable on the server which TFTP also need to be enable
  D. Enable on the server which TFTP also need to be enable

• Question 5:

  Which resources can include MRGL?

  A. MoH
  B. Cisco IP Phone service
  C. soft key template
  D. Annunciator
  E. MTP
  F. Something about CTI
  A. MoH
  D. Annunciator
  E. MTP

• Question 6:

  When A CSV file is created for use with the Cisco Unified Communications Manager Auto- Register Phone Tool, how is the IP phone MAC address configured?

  A. A dummy MAC address is entered for each phone in the CSV file.
  B. The MAC address is left blank in the CSV file and Cisco Unified Communications Manager BAT imports the CSV file with the Create Dummy MAC Address option selected.
  C. When the CSV file is created, the Create Dummy MAC Address option must be selected before the file is uploaded into the Cisco Unified Communications Manager BAT tool.
  D. The MAC address is left blank in the CSV file and Cisco Unified Communications Manager BAT queries the Cisco Unified Communications Manager device database for the MAC address that matches the extension created in the CSV file.
  B. The MAC address is left blank in the CSV file and Cisco Unified Communications Manager BAT imports the CSV file with the Create Dummy MAC Address option selected.

• Question 7:

  What is required to configure NTP on a Cisco Unified Communications Manager publisher to support SIP phones?

  A. Configure Phone NTP References in Cisco Unified CM Administration.
  B. Configure the NTP server in Cisco Unified OS Administration
  C. Configure the NTP server in Cisco Unified CM Administration.
  D. Configure time in Cisco Unified OS Administration.
  E. Restart the Unified Communications Manager services for the publisher and subscribers on the Unified CallManager Serviceability page
  A. Configure Phone NTP References in Cisco Unified CM Administration.

• Question 8:

  What is the default option for framing when you configure T1 controller?

  A. Super Frame
  B. alternate mark inversion
  C. Extended Super Frame
  D. cyclic redundancy check 4
  E. high-density bipolar 3
  F. No-CRC4
  G. binary 8-zero substitution
  H. Australia
  C. Extended Super Frame

• Question 9:

  Refer to the exhibit. What is the command to place the static IP address by CLI in the Cisco TelePresence MSE 8000?

  

  A. MSE 8050: static 0 10.10.2.13 255.255.255.255 10.10.2.1 200.87.100.10 200.87.100.20.
  B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
  C. MSE 8050: static 1 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20
  D. MSE 8050: static ip 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.
  B. MSE 8050: static 0 10.10.2.13 255.255.255.0 10.10.2.1 200.87.100.10 200.87.100.20.

• Question 10:

  Which three configuration options are currently unsupported when configuring the Cisco Unified Border Element for videoconferencing? (Choose three.)

  A. RSVP synchronization of H.323 calls.
  B. Multiple logical channels per call leg.
  C. H.323-to-SIP video traffic.
  D. FECC support.
  E. Video endpoints with different H.245 versions.
  F. Dual video/picture-in-picture.
  G. DSCP marking for video streams.
  C. H.323-to-SIP video traffic.
  E. Video endpoints with different H.245 versions.
  F. Dual video/picture-in-picture.