Cisco 300-070 Online Practice Questions and Exam Preparation

Cisco 300-070 Online Questions & Answers

• Question 181:

  In Cisco VCS, to enable URI dialing via DNS, you must configure at least one DNS zone. Which path do you take to configure the zone?

  A. Configuration > Zones > Zones
  B. Status > Zones
  C. Configuration > Protocols > SIP
  D. Configuration > Protocols > H.323
  A. Configuration > Zones > Zones

• Question 182:

  If a SIP phone has neither KPML nor a set of dial rules configured, how are digits sent to Cisco Unified Communications Manager for further processing?

  A. the user must press the # key
  B. the user must press the Dial softkey
  C. the user must press the enbloc softkey
  D. when the user finishes dialing, the digits will be sent automatically
  B. the user must press the Dial softkey

• Question 183:

  Which three events describe the relationship of an IP phone to its secondary subscriber in a Cisco Unified Communications Manager system? (Choose three.)

  A. The IP Phone sends a TCP connect message.
  B. The IP Phone sends a TCP keepalive message every 30 seconds.
  C. The IP Phone sends a TCP keepalive message every 60 seconds.
  D. The IP Phone registers with the primary system when the secondary system is unavailable.
  E. The IP Phone attempts to register with the secondary system when the primary system is unavailable.
  F. The IP Phone registers with all the Cisco Unified Communications Manager subscribers in the group simultaneously, including the secondary subscriber.
  A. The IP Phone sends a TCP connect message.
  B. The IP Phone sends a TCP keepalive message every 30 seconds.
  E. The IP Phone attempts to register with the secondary system when the primary system is unavailable.

• Question 184:

  An engineer has received a new Cisco MX200 for a remote office and wants to ensure that unauthorized end users cannot change any settings on the MX200. Which configuration element must be configured to prevent unauthorized changes?

  A. device settings via web interface on Cisco Unified Communications Manager
  B. security settings via web interface on the Expressway
  C. maintenance settings via web interface on the MX200
  D. user administration via web interface on the MX200
  D. user administration via web interface on the MX200

• Question 185:

  Which three options can be used to configure digit manipulation for dial peers? (Choose three.)

  A. digit translation rules
  B. called party transformations
  C. route partitions
  D. forward digits
  E. route patterns
  F. digit stripping and prefixes
  G. calling party transformations
  A. digit translation rules
  D. forward digits
  F. digit stripping and prefixes

• Question 186:

  Which discard digits instruction removes the access code from a number before passing the number onto an adjacent system?

  A. PreDot
  B. PreAt
  C. NoDigits
  D. Trailing-#
  A. PreDot

• Question 187:

  Which two options are components of Media Resources Architecture? (Choose two.)

  A. Music on hold
  B. Media Resource Manager
  C. Media Resource Group
  D. Route list
  E. Route group
  B. Media Resource Manager
  C. Media Resource Group

• Question 188:

  When using the Dialed Number Analyzer tool, what step has to occur to ensure the most recent CUCM configuration is analyzed?

  A. dialed number analyzer server
  B. database synchronization
  C. directory number alias sync
  D. directory number alias lookup
  A. dialed number analyzer server

• Question 189:

  An engineer wants to add a software conference bridge on Cisco Unified Communications Manager web admin and cannot find the option to do so. What is one cause of this?

  A. Enterprise Parameters have not been set to allow this.
  B. The CUCM Cluster is using the maximum number of allowed subscribers.
  C. Service Parameters have not been set to allow this
  D. A software conference bridge cannot be added to CUCM by using Conference Bridge Configuration.
  D. A software conference bridge cannot be added to CUCM by using Conference Bridge Configuration.

• Question 190:

  You want to set up a Cisco TelePresence Server 8710 cluster. Which statement is true?

  A. All blades in a cluster must be running the same version of software.
  B. Up to four blades can be clustered in version 2.2.
  C. The administrator can mix the type of blades in the cluster.
  D. The support key can be installed in a single blade during the implementation.
  B. Up to four blades can be clustered in version 2.2.