VMware 2V0-33.22 Online Practice Questions and Exam Preparation

VMware 2V0-33.22 Online Questions & Answers

• Question 1:

  A cloud administrator Is tasked with creating a new network segment In the software- defined data center that utilizes the corporate DHCP server to provide IP addresses.

  What is the proper sequence to create the required network segments?

  A. 1- Create a new segment attached to the Tler-0 gateway 2. Configure the segment DHCP Ip-helper
  B. 1. Create a DHCP server profile 2. Create a new segment attached to the Tler-0 gateway 3. Configure the segment DHCP config to utilize the new DHCP server profile
  C. 1. Create a new segment attached to the Tier-1 gateway 2. Configure the segment DHCP ip-helper
  D. 1. Create a DHCP relay profile 2. Create a new segment attached to the Tler-1 gateway 3. Configure the segment DHCP config to utilize the new DHCP relay profile
  B. 1. Create a DHCP server profile 2. Create a new segment attached to the Tler-0 gateway 3. Configure the segment DHCP config to utilize the new DHCP server profile

  ---

  Explanation/Reference:

  https://docs.vmware.com/en/VMware-NSX-T-Data- Center/3.1/administration/GUID-BF536EEF-7AC3-47D0-B4E6-E24B591530AA.html According to the VMware Exam Guide for Cloud Professional Exam (https://mylearn.vmware.com/mgrreg/courses.cfm?ui=www_eduanda=oneandid_subject=45954 ),"To create a new network segment that utilizes the corporate DHCP server to provide IP addresses, the following sequence should be used: Create a DHCP server profile, create a new segment attached to the Tler-0 gateway, and configure the segment DHCP config to utilize the new DHCP server profile."

• Question 2:

  A cloud administrator is asked to validate a proposed internetworking design that will provide connectivity to a VMware Cloud on AWS environment from multiple company locations. The following requirements must be met:

  A. Connectivity the VMware Cloud on AWS environment must NOT have a single point of failure.
  B. Any network traffic between on-premises company locations must be sent over a private IP address space.
  C. Connectivity the VMware Cloud on AWS environment must support high-throughput data transfer.
  A. Connectivity the VMware Cloud on AWS environment must NOT have a single point of failure.

• Question 3:

  When preparing to deploy VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts in a data center, which two networking constrains must be considered? (Choose two.)

  A. Fiber Channel connectivity
  B. Creating a direct connect to the nearest AWS Region
  C. Compatible top of rack switches
  D. Uplinks for local network connectivity
  E. Dedicated subnets for SDDC management network
  C. Compatible top of rack switches
  E. Dedicated subnets for SDDC management network

  ---

  Explanation/Reference:

  Compatible top of rack switches are necessary to ensure that the data center is able to support the VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts deployments [1]. The switches must support 10GE and 25GE ports, as well

  as Layer 3 routing protocols such as OSPF and BGP.

  Dedicated subnets for SDDC management network are also needed for the deployment of VMware Cloud on Dell EMC or VMware Cloud on AWS Outposts

  [1]. The SDDC management network will be used for communication between the VMware Cloud components and the data center, and must be isolated from the customer network.

  Reference: [1] https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/VMware-Cloud-on-AWS-Outposts/GUID-prerequisites-network.html

• Question 4:

  Which two steps does a cloud administrator need to take when protecting a VMware Cloud on AWS software-defined data center (SDDC) with VMware site Recovery? (Choose Two.)

  A. Deploy the vSphere Replication virtual appliance.
  B. Deploy the Site Recovery manager virtual Appliance.
  C. Connect the Site Recovery manager instance on the protected recovery site.
  D. Register the vSphere Replication appliance with vCenter Single Sign-On
  E. Set the NSX-T Edge management gateway firewall rules.
  A. Deploy the vSphere Replication virtual appliance.
  C. Connect the Site Recovery manager instance on the protected recovery site.

  ---

  Explanation/Reference:

  A cloud administrator needs to deploy the vSphere Replication virtual appliance and the Site Recovery manager virtual appliance when protecting a VMware Cloud on AWS software-defined data center (SDDC) with VMware Site Recovery. The vSphere Replication virtual appliance is responsible for replicating the virtual machines from the source to the target site. Site Recovery Manager virtual appliance acts as the central management and orchestration platform for the entire disaster recovery process.

  Reference:https://docs.vmware.com/en/VMware-Site-Recovery/index.html

  In order to protect a VMware Cloud on AWS software-defined data center (SDDC) with VMware Site Recovery[1][2], a cloud administrator needs to take the following two steps:

  A) Deploy the vSphere Replication virtual appliance - This can be done by logging into the vSphere Client, navigating to the vCenter Server, and then selecting the Deploy OVF Template option. From here, the cloud administrator can upload the OVF template for the vSphere Replication appliance and configure it.

  B) Connect the Site Recovery manager instance on the protected recovery site - This involves logging into the Site Recovery Manager (SRM) and setting up the connection between the protected recovery site and the SRM instance. This can be done by going to the SRM dashboard and then selecting the Connect Remote Site option.

  References: [1]https://docs.vmware.com/en/VMware-Site-Recovery/services/vmc-dr-deployment/GUID-DBF6CD69-6F7E-47E2-9417-91D5C5F5AC5E.html [2]https://docs.vmware.com/en/VMware-Site-Recovery/services/vmc-dr-deployment/GUID-1C8B7BCA-D4BE-4EAF-9A8A-4B42E2B7236A.html

• Question 5:

  Which solution would an administrator use to manage the lifecycle operations of Tanzu Kubernetes clusters?

  A. VMware Tanzu Service Mesh
  B. VMware vSphere Lifecycle Manager
  C. VMware Tanzu Observability by Wavefront
  D. VMware Tanzu Kubernetes Grid
  D. VMware Tanzu Kubernetes Grid

  ---

  Explanation/Reference:

  VMware Tanzu Kubernetes Grid is described as a comprehensive solution for operating Kubernetes-based applications in production, as well as creating, scaling and managing clusters. It provides a centralized control plane for managing the lifecycle operations of Tanzu Kubernetes clusters. (Source:https://tanzu.vmware.com/kubernetes)

• Question 6:

  Which three functions are provided by the components within the Kubernetes control plane? (Choose three.)

  A. Balances pods across the nodes within a Kubernetes cluster.
  B. Ensures that containers are running in a pod.
  C. Configures network rules to route traffic to containers within the Kubernetes cluster.
  D. Stores Kubernetes cluster data in a key-value data store.
  E. Watches the API for changes and responds with appropriate actions.
  F. Stores and distributes container images.
  A. Balances pods across the nodes within a Kubernetes cluster.
  D. Stores Kubernetes cluster data in a key-value data store.
  E. Watches the API for changes and responds with appropriate actions.

  ---

  Explanation/Reference:

  https://kubernetes.io/docs/concepts/overview/components/#control-plane-components

• Question 7:

  When configuring VMware Cloud Disaster Recovery (VCDR), with what can protection groups and disaster recovery plans be associated?

  A. Only a single vCenter Instance In the on-premises data center or VMware Cloud software-defined data center (SDDC).
  B. Multiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or on-premises data center.
  C. Multiple vCenter instances in the same VMware Cloud software-defined data center (SDDC) or only a single vCenter in the on-premises data center.
  D. Only a single vCenter Instance in the VMware Cloud software-defined data center (SDDC) or multiple vCenter Instances In the on-premises data center.
  A. Only a single vCenter Instance In the on-premises data center or VMware Cloud software-defined data center (SDDC).

  ---

  Explanation/Reference:

  vCenter Mapping Mapping vCenters in a DR plan consists of selecting source vCenters that are registered to the protected site. Choosing a target vCenter for a Failover SDDC is simple; each SDDC contains a single vCenter instance. For VMware Cloud Disaster Recovery, keep in mind that a protected site can have multiple registered vCenters, but you can only map one vCenter on VMware Cloud on AWS per-DR plan. https://vmc.techzone.vmware.com/resource/introduction-vmware-cloud-disaster-recovery#inventory-and-resource-mapping https://vmc.techzone.vmware.com/resource/protection-groups-and-recovery-plans-vcdr#create-a-disaster-recovery-plan

• Question 8:

  A cloud administrator Is managing a VMware Cloud on AWS environment consisting of a single cluster with six hosts. There have been no changes made to the Elastic DRS configuration. In which two situations will Elastic DRS add another a host to the cluster? (Choose two.)

  A. When availability zone failure occurs
  B. When memory utilization reaches 90%
  C. When network utilization reaches 90%
  D. When CPU utilization reaches 90%
  E. When storage utilization reaches 80%
  A. When availability zone failure occurs
  E. When storage utilization reaches 80%

  ---

  Explanation/Reference:

  https://docs.vmware.com/en/VMware-Cloud-on- AWS/services/com.vmware.vmc-aws-operations/GUID-961C4B32-6093-4C2E-AFE5- 5B1F56BF4EEE.html

• Question 9:

  A cloud administrator is responsible for managing a VMware Cloud solution and would like to ensure that I/O-intensive workloads run in the most optimum way possible. Which two steps should the administrator complete on I/O-intensive workloads to meet this requirement? (Choose two.)

  A. Ensure that the VMware hardware version is 7 or later.
  B. Enable the memory hot-add feature.
  C. Configure the LSI Logic Parallel SCSI controller.
  D. Configure the VMware Paravirtual SCSI (PVSCSI) adapter.
  E. Configure a maximum of two CPU cores per socket.
  A. Ensure that the VMware hardware version is 7 or later.
  D. Configure the VMware Paravirtual SCSI (PVSCSI) adapter.

  ---

  Explanation/Reference:

  The two steps that the cloud administrator should complete on I/O-intensive workloads to ensure the best performance possible are to configure the VMware Paravirtual SCSI (PVSCSI) adapter and to ensure that the VMware hardware version is 7 or later. The PVSCSI adapter provides improved performance and scalability compared to the LSI Logic Parallel SCSI controller. Additionally, the hardware version should be 7 or later to ensure that the virtual machine is able to take advantage of the latest features and enhancements. Enabling the memory hot-add feature and configuring a maximum of two CPU cores per socket will not improve the performance of I/O-intensive workloads.

  Why does VMware refuse to educate their customers ... - VMware ... https://communities.vmware.com/t5/VMware-Education-Services/Why-does-VMware-refuse-to-educate-their-customers/td-p/2005973

  VMware Technical Support Guide https://www.vmware.com/pdf/techsupportguide.pdf

  Publishing Applications with VMware Horizon 7 https://vcdx.vmware.com/content/dam/digitalmarketing/vmware/ru/pdf/techpaper/vmware-horizon-7-application-publishing.pdf

  

  https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-aws-performance.pdf

• Question 10:

  A cloud administrator Is tasked with deploying two virtual machines (APP01 and APP02) to a software-defined data center (SDDC) with multiple clusters hosted In VMware Cloud on AWS based on the following requirements:

  1.

  APP01 and APP02 should NOT run on the same host.

  2.

  Only three hosts in the SDDC are entitled to run the software installed on these servers.

  3.

  All entitled hosts are in cluster 1.

  Which two actions should the administrator take to meet these requirements? (Choose two)

  A. Create a Disable DRS vMotion policy.
  B. Create a VM-VM anti-affinity policy.
  C. Deploy APP01 to Cluster 1 and APP02 to cluster 2. a Create a VM-Host anti-affinity policy.
  D. Create a VM-Host affinity policy.
  B. Create a VM-VM anti-affinity policy.
  D. Create a VM-Host affinity policy.

  ---

  Explanation/Reference: