Which three items should be considered when performing a hot migration of a virtual machine (VM)? (Choose three.)
A. The source and destination host management network IP address families must match
B. The vGPU configuration of the VM
C. The status of the guest operating system in the VM
D. The CPU instruction set required by the VM
E. The source and destination host must have shared access to the storage that contains the VM
F. The status of VMware Tools on the VM
Correct Answer: CEF
For the source and destination host to have shared access to the storage that contains the VM, they must be able to access the same datastore. This requires that the datastore be available to both hosts and that the datastore has the same
name on both hosts.
The status of VMware Tools on the VM should also be checked before performing a hot migration. VMware Tools is a suite of utilities that enhances the performance of a virtual machine's guest operating system and improves the
management of the virtual machine. If VMware Tools is not installed or not up to date, the hot migration may fail. Finally, the status of the guest operating system in the VM should also be checked before performing a hot migration. The guest
operating system should be up and running and not in a suspended state. If the guest operating system is in a suspended state, the hot migration may fail.
The CPU instruction set required by the VM and the vGPU configuration of the VM are not items to consider when performing a hot migration of a virtual machine. The source and destination host management network IP address families do
not need to match for the hot migration to be successful.
Which VMware Cloud tool would an administrator use to forward all the monitored traffic to a network appliance for analysis and remediation?
A. vRealize Log Insight
B. Traceflow
C. Port mirroring
D. IPFIX
Correct Answer: C
Port mirroring is a VMware Cloud tool that an administrator can use to forward all the monitored traffic to a network appliance for analysis and remediation. The network appliance can then analyze the mirrored traffic and take the appropriate
remedial action. Port mirroring can also be used to identify and troubleshoot network issues, as well as monitor network activities.
Port mirroring lets you replicate and redirect all of the traffic coming from a source. The mirrored traffic is sent encapsulated within a Generic Routing Encapsulation (GRE) tunnel to a collector so that all of the original packet information is
preserved while traversing the network to a remote destination.
Port mirroring is used in the following scenarios:
Troubleshooting - Analyze the traffic to detect intrusion and debug and diagnose errors on a network.
Compliance and monitoring - Forward all of the monitored traffic to a network appliance for analysis and remediation.
Port mirroring includes a source group where the data is monitored and a destination group where the collected data is copied to. The source group membership criteria require VMs to be grouped based on the workload such as web group or
application group. The destination group membership criteria require VMs to be grouped based on IP addresses. Port mirroring has one enforcement point, where you can apply policy rules to your SDDC environment.
The traffic direction for port mirroring is Ingress, Egress, or Bi Directional traffic:
Ingress is the outbound network traffic from the VM to the logical network. Egress is the inbound network traffic from the logical network to the VM. Bi Directional is the traffic from the VM to the logical network and from the logical network to
A user is assigned the CloudAdmin role in a VMware Cloud on AWS software-defined data center (SDDC). At which level in the inventory hierarchy can the user deploy virtual machines?
A. Compute-ResourcePool in the Hosts and Clusters view
B. Discovered virtual machine folder in the VMs and Templates view
C. vsanDatastore in the Storage view
D. Mgmt-ResourcePool in the Hosts and Clusters view
Correct Answer: B
This would enable the user to have the necessary permissions to deploy virtual machines - and thus, would ensure that all of the necessary virtual machines are deployed in a timely and efficient manner.
VMware Cloud on AWS Documentation: "Deployment of virtual machines" VMware Cloud on AWS Documentation: "Creating virtual machines with the VMware Cloud on AWS console"
VMware Cloud on AWS Documentation: "Managing virtual machines with the VMware Cloud on AWS console"
Question 34:
A cloud administrator is tasked with deploying a new software-defined data center (SDDC) in VMware Cloud on AWS and has been able to log into the VMware Cloud console Successfully. However, they cannot access the VMware Cloud on AWS Services. Which two tasks need to be performed for the administrator to gain access? (Choose two.)
A. The cloud administrator will need to create a new subscription for the VMware Cloud on AWS service.
B. The cloud administrator will need to request access to the VMware Cloud on AWS service
C. The cloud administrator will need the globalcloudadmin role in the VMware Cloud on AWS service.
D. The cloud administrator will need the Administrator role in the VMware Cloud on AWS service.
E. The cloud administrator will need the cloudadmin role in the VMware Cloud on AWS service.
Correct Answer: BD
(Reference:https://docs.vmware.com/en/VMware-Cloud-on- AWS/services/com.vmware.vcloud.admin.doc/GUID-3568D3B3-ACFE-41F1-A966- 5D4784F8A7A0.html) To request access to the VMware Cloud on AWS service, the cloud administrator must log in to the VMware Cloud Console and fill out the New Subscription Request form. Once the form is filled out and submitted, the cloud administrator will receive an email with instructions on how to access the VMware Cloud on AWS service. The cloud administrator will also need to have the Administrator role in the VMware Cloud on AWS service in order to gain access. The Administrator role allows the cloud administrator to access the VMware Cloud on AWS service, view the services available in the VMware Cloud on AWS console, and manage the resources in the SDDC. Reference: [1] https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/VMware-Cloud-on-AWS-Outposts/GUID-access.html
Question 35:
A company needs to Increase its Infrastructure capacity quickly to accommodate their rapid business growth. Which cloud use case describes their requirement?
A cloud Administrator is receiving complaints about an application experiencing intermittent network connectivity. Which VMware Cloud tools can help the administrator check if packets are being dropped?
A. VRealize Log Insight
B. Port mirroring
C. IPFIX
D. Traceflow
Correct Answer: D
IPFIX (Internet Protocol Flow Information Export) is a standard for the format and export of network flow information for troubleshooting, auditing, or collecting analytics information. Port mirroring lets you replicate and redirect all of the traffic
coming from a source. The mirrored traffic is sent encapsulated within a Generic Routing Encapsulation (GRE) tunnel to a collector so that all of the original packet information is preserved while traversing the network to a remote destination.
Use Traceflow to inspect the path of a packet. Traceflow traces the transport node-level path of a packet. The trace packet traverses the logical switch overlay, but is not visible to interfaces attached to the logical switch. In other words, no
packet is actually delivered to the test packet's intended recipients.
vRealize Log Insight is a log collection and analytics virtual appliance that enables administrators to collect, view, manage and analyze syslog data. Log Insight provides real- time monitoring of application logs, network traces, configuration
files, messages and performance data.
Question 37:
A customer is concerned about threats propagating out to their cloud disaster recovery site. Which VMware Cloud solution offers the capability for an operational air-gap to stop ransomware?
Operational isolation (operational "air-gapping") is critical to DR. VMware Cloud DR was designed from the very beginning for its systems and repository to be operationally isolated and for instantiating isolated recovery environments.
Question 38:
What is the purpose or the VMware cloud on AWS management gateway (MGW)?
A. A Tier-0 router that handles network traffic for workload virtual machines connected to routed computer network segments
B. A Tier-0 router that handles routing and firewalling for the VMware vCenter Server and othermanagement appliances running in the software-defined datacenter (SDDC).
C. A Tier-1 router that handles network traffic for workload virtual machines connected to routes compute network segments
D. A Tier-1 router handles routing and firewalling for the VMware vCenter Server and Other management appliances running in the software-defined datacenter (SDDC).
Correct Answer: D
Management Gateway (MGW) The MGW is a Tier 1 router that handles routing and firewalling for vCenter Server and other management appliances running in the SDDC. Management gateway firewall rules run on the MGW and control access to management VMs. In a new SDDC, the Internet connection is labelled Not Connected in the Overview tab and remains blocked until you create a Management Gateway Firewall rule allowing access from a trusted source.
Question 39:
A cloud administrator Is tasked with creating a new network segment In the software- defined data center that utilizes the corporate DHCP server to provide IP addresses.
What is the proper sequence to create the required network segments?
A. 1- Create a new segment attached to the Tler-0 gateway
2. Configure the segment DHCP Ip-helper
B. 1. Create a DHCP server profile
2.
Create a new segment attached to the Tler-0 gateway
3.
Configure the segment DHCP config to utilize the new DHCP server profile
C. 1. Create a new segment attached to the Tier-1 gateway
2. Configure the segment DHCP ip-helper
D. 1. Create a DHCP relay profile
2.
Create a new segment attached to the Tler-1 gateway
3.
Configure the segment DHCP config to utilize the new DHCP relay profile
Correct Answer: B
https://docs.vmware.com/en/VMware-NSX-T-Data- Center/3.1/administration/GUID-BF536EEF-7AC3-47D0-B4E6-E24B591530AA.html According to the VMware uide for Cloud Professional Exam (https://mylearn.vmware.com/mgrreg/courses.cfm?ui=www_eduanda=oneandid_subject=45954 ),"To create a new network segment that utilizes the corporate DHCP server to provide IP addresses, the following sequence should be used: Create a DHCP server profile, create a new segment attached to the Tler-0 gateway, and configure the segment DHCP config to utilize the new DHCP server profile."
Question 40:
A cloud administrator is deploying a new software-defined data center (SDDC) in VMware Cloud on AWS. Long-term planning indicates that a minimum of 30 hosts are required.
What is a valid management network CIDR based on the requirements?
A. 10.4.0.0/23
B. 10.3.0.0/24
C. 10.2.0.0/16
D. 10.1.0.0/20
Correct Answer: D
A valid management network CIDR based on the requirements is 10.1.0.0/20, as this provides a range of 4096 IP addresses, which is more than enough for 30 hosts. A /23 CIDR only provides 512 IP addresses, which is not enough for 30
hosts, while a /24 CIDR provides 256 IP addresses and a /16 CIDR provides 65,536 IP addresses, which is more than is needed for the 30 hosts.
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only VMware exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 2V0-33.22 exam preparations and VMware certification application, do not hesitate to visit our Vcedump.com to find your solutions here.