For switch port Discovery on Cascade Profiler what device provides the MAC to IP address mapping?
A. ARP table on a layer 3 device (router)
B. CAM (Content Addressable Memory) on a layer 2 device (switch)
C. Both the ARP and CAM tables from a layer 2 device (switch)
D. All of the above
E. None of the above
Which of the following are true about creating a capture job on Cascade Shark: (Select 3)
A. A single capture port can be specified.
B. Any combination of capture ports can be specified.
C. All capture ports on the Cascade Shark can be specified.
D. Trend/Index data has a default retention of seven days.
E. There is no Trend/Index data by default, it is recommended to set this as appropriate.
The Cascade Shark de-duplication mode should be used:
A. To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by the way different Cascade Shark ports may see the same UDP/TCP sessions.
B. To de-duplicate duplicate flows sent to the Cascade Profiler appliance caused by use of the Aggregating Port seeing the same UDP/TCP sessions.
C. To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way Port Mirroring is configured on a switch.
D. To de-duplicate duplicate packets that may be collected by the Cascade Shark caused by the way filtering is used on a capture job.
E. All of the above
Within Cascade Pilot, when packet capture (pcap) files have associated trending/indexing data the following are true (select 2)
A. They appear in the my-views main directory.
B. Views that take advantage of the trending/indexing data load faster.
C. The file icon includes a colored-lightning bolt.
D. The file loads faster into Wireshark.
E. Additional pre-defined filters and watches are available.
Cascade is being used to detect application traffic using both Layer 7 fingerprinting technology and Layer 4 mappings. Which statement below best characterizes the priority of traffic being tagged?
A. Layer 7 fingerprint matches always take priority over Layer 4 matches.
B. Layer 4 mappings with a higher priority number take precedence over Layer 4 mappings with a lower priority number.
C. Layer 4 mappings always take priority over Layer 7 fingerprint matches when the override is set to Unknown/Unclassified.
D. Layer 4 mappings with a lower priority number take precedence over Layer 4 mappings with a higher priority number when the override is set to Always.
E. C and D.
F. A, B and C.
WAN optimization reports on Cascade Profiler require that the WAN interfaces for all Steelheads performing optimization are included in a WAN Interface group and are marked as Steelhead interfaces. Which of the following is true?
A. If the Steelhead is running a RioS version older than 5.5.3, the Steelhead WAN interfaces need to be manually added, and marked as Steelhead interfaces.
B. If the Steelhead is running a RioS version 5.5.3 or higher, the Steelhead WAN interfaces are automatically added to the WAN page, but the user must manually mark them as Steelhead interfaces.
C. If the Steelhead is running a RioS version 6.0.1 or higher, the Steelhead WAN interfaces are automatically added to the WAN page and are also be marked as a Steelhead interface.
D. All of the above are true.
E. A and C only are true.
If a prospective customer has 2000 users what would be a reasonable estimated number of flows per minute used in sizing Profiler?
A. 2000
B. 4000
C. 20000
D. 40000
E. 200000
F. 400000
When troubleshooting a Steelhead deployment with Cascade you suspect that you may have packet ricochet. Since you are exporting CascadeFlow from the Steelheads to the Cascade how can you use Profiler to see if there actually is packet ricochet?
A. Identify connection duration.
B. Look for high server side packet counts.
C. Look for high number of reset.
D. Run a report with a Connection Graph.
E. Run a report on the WAN Interface of the Steelhead.
F. Run a report with Flow List and look at the topology columns.
Time Control within Cascade Pilot is used for:
A. Controlling the portion of a packet capture (pcap) file analysed in the current view.
B. Creating a trace clip from a Cascade Shark appliance Capture job.
C. Controlling the size of a Capture Job created on a Cascade Shark appliance.
D. A and B
E. A, B, and C.
Which of the following does the Cascade Sensor device provide that the Cascade Sensor-VE does not? (Select 2)
A. Layer-7 Application Fingerprinting
B. Connection Duration Statistics
C. Riverbed RiOS Integration
D. Rotating Packet Log
Nowadays, the certification exams become more and more important and required by more and more enterprises when applying for a job. But how to prepare for the exam effectively? How to prepare for the exam in a short time with less efforts? How to get a ideal result and how to find the most reliable resources? Here on Vcedump.com, you will find all the answers. Vcedump.com provide not only Riverbed exam questions, answers and explanations but also complete assistance on your exam preparation and certification application. If you are confused on your 299-01 exam preparations and Riverbed certification application, do not hesitate to visit our Vcedump.com to find your solutions here.