Riverbed 299-01 Online Practice Questions and Exam Preparation

Riverbed 299-01 Online Questions & Answers

• Question 21:

  How does Cascade Profiler track URL's?

  A. Each URL that is seen by the Sensor is shown on the dashboard or searchable via reporting.
  B. Customer defined URL's are mapped to an application name which can then be shown on the dashboard, searched via reporting, or used in Analytic definitions.
  C. URL's are tracked by either a Cascade Sensor or via NetFlow version 5 (or higher) export.
  D. Cascade does not track URL's.
  B. Customer defined URL's are mapped to an application name which can then be shown on the dashboard, searched via reporting, or used in Analytic definitions.

• Question 22:

  Refer to the exhibit.

  

  What does the :3 and :4 signify after the IP addresses?

  A. The numerical order of the interfaces from right to left in the network device chassis.
  B. The SNMP index number of device interfaces where a poll has not yet been performed.
  C. The numerical order of the interfaces from left to right in the network device chassis.
  D. The SNMP index number of device interfaces where a poll has been performed.
  B. The SNMP index number of device interfaces where a poll has not yet been performed.

• Question 23:

  In the Cascade Profiler GUI, what is a Port Group?

  A. A combination of IP Address and Port Number
  B. One or more protocol/port combinations mapped to a name
  C. Names mapped to IP subnets
  D. Layer-2 switch ports grouped into a logical name
  E. NetFlow interfaces grouped into a logical name
  B. One or more protocol/port combinations mapped to a name

• Question 24:

  Cascade Pilot supports the following filter languages: (Select 4)

  A. Perl Regex
  B. Cascade Pilot Filter
  C. Wireshark Capture Filter (BPF)
  D. Wireshark Display Filter
  E. Time Interval
  F. Visual Basic
  B. Cascade Pilot Filter
  C. Wireshark Capture Filter (BPF)
  D. Wireshark Display Filter
  E. Time Interval

• Question 25:

  Once the Cascade Shark appliance has an initial configuration with an IP Address set to 10.1.1.1 you can connect to it from a web browser using the URL:

  A. http://10.1.1.1
  B. https://10.1.1.1
  C. https://10.1.1.1:443
  D. https://10.1.1.1:8080
  E. http://10.1.1.1:8080
  D. https://10.1.1.1:8080

• Question 26:

  The Cascade Profiler and Express define a service as all servers, clients, applications and ports involved in the end-to-end delivery of a network service. A service is composed of one or more _______________ that can be monitored, reported and alerted on individually.

  A. Data Component
  B. Segments
  C. Report Criteria
  D. Router
  E. User(s)
  B. Segments

• Question 27:

  Within Cascade Pilot, when packet capture (pcap) files have associated trending/indexing data the following are true (select 2)

  A. They appear in the my-views main directory.
  B. Views that take advantage of the trending/indexing data load faster.
  C. The file icon includes a colored-lightning bolt.
  D. The file loads faster into Wireshark.
  E. Additional pre-defined filters and watches are available.
  B. Views that take advantage of the trending/indexing data load faster.
  C. The file icon includes a colored-lightning bolt.

• Question 28:

  On Cascade Profiler, what does "tunneled" indicate when used as a keyword for an Application?

  A. When the traffic flow matches more than one Application signature. This indicates that the one Application may have been tunneled over the other.
  B. When an Application runs over a non-standard port (such as TELNET traffic on Port 80).
  C. When a "port definition" is non-standard (e.g. when you change tcp/80's definition from http to telnet).
  D. When a Layer-4 Application Mapping is defined.
  A. When the traffic flow matches more than one Application signature. This indicates that the one Application may have been tunneled over the other.

• Question 29:

  How do Cascade Performance Analytics assist with Performance Monitoring?

  A. By setting intelligent static thresholds for Application metrics and Interface metrics, tolerance can be determined. Cascade will use these thresholds and tolerances to report on deviations indicative of performance problems.
  B. The Customer only needs to identify their critical hosts, interfaces and/or applications, and Cascade will automatically baseline their behavior and report on deviations indicative of performance problems.
  C. The Performance Analytics use knowledge of hosts, interfaces, and/or applications are able to detect security threats such as host scans and worms.
  D. After baselining is completed, Cascade can re-route congested traffic to avoid congested application delivery paths.
  B. The Customer only needs to identify their critical hosts, interfaces and/or applications, and Cascade will automatically baseline their behavior and report on deviations indicative of performance problems.

• Question 30:

  Which DHCP Server Product(s) are supported with the Cascade DHCP integration?

  A. QIP
  B. ISC
  C. Infoblox
  D. Windows DHCP
  E. All of the above
  F. None of the above
  E. All of the above