Riverbed 299-01 Online Practice Questions and Exam Preparation

Riverbed 299-01 Online Questions & Answers

• Question 11:

  Cascade accepts lease data from DHCP servers in order to: (Select 2)

  A. obtain MAC addresses.
  B. improve accuracy of the security baseline.
  C. force lease extensions longer to make tracking unique PCs easier.
  D. obtain an IP for itself.
  A. obtain MAC addresses.
  B. improve accuracy of the security baseline.

• Question 12:

  Which parameters can be used to set up an Application Performance analytic on Cascade Profiler?

  A. Applications, Ports/Protocols, QOS, Servers, Clients
  B. Ports/Protocols, QOS, Servers, Clients
  C. Applications, Ports/Protocols,
  D. Applications, Ports/Protocols, QOS, Servers, Clients, Interfaces
  A. Applications, Ports/Protocols, QOS, Servers, Clients

• Question 13:

  On the Cascade Profiler, when importing a switch mitigation device list, it needs to be in the following format:

  A. host_name, device_type, read_only_community_string, write_community_string
  B. host_name, IP_address, read_only_community_string, write_community_string
  C. host_name, IP_address, device_type, read_only_community_string, write_community_string
  D. host_name, IP_address, device_type, read_only_community_string, write_community_string, pass phrase
  C. host_name, IP_address, device_type, read_only_community_string, write_community_string

• Question 14:

  Which of the following configuration changes can be used to reduce the number of alerts generated overall for a Service?

  A. Edit each Service policy to increase the Tolerance slider for Low and High alerts.
  B. Edit each Service policy and set a noise floor to specify the minimum amount of change that the policy can treat as deviation from normal behavior.
  C. Edit the Service and select fewer metrics to monitor for each segment that comprises the Service.
  D. Modify the location host group type used for monitoring end user traffic to use fewer groups (for example, Region instead of Site).
  E. A, B, C, and D.
  F. A and B only.
  E. A, B, C, and D.

• Question 15:

  Refer to the exhibit.

  

  Traffic that is not analyzed by a Cascade Sensor such as Unclassified, under Override Policy, applies to which of the following conditions:

  A. Unconditionally overwrite any existing layer 7 application mapping.
  B. Apply to flows that are either Unclassified, or did not match any known layer 7 signatures
  C. Apply only to flows that are not seen by a Cascade Sensor or other layer 7 signature-based device.
  D. None of the above.
  C. Apply only to flows that are not seen by a Cascade Sensor or other layer 7 signature-based device.

• Question 16:

  Which of the following are TRUE concerning packet capture jobs on the Cascade Shark appliancE. (Select 4)

  A. Packets can be captured from multiple capture ports on one Cascade Shark appliance.
  B. The maximum length the packet data can be specified.
  C. Packets can be filtered on host IP addresses.
  D. SSL traffic can be decoded if the appropriate certificate are loaded in the Cascade Shark appliance.
  E. The maximum storage bandwidth for the job can be specified in bits/sec.
  F. Multiple packet capture jobs can run concurrently.
  A. Packets can be captured from multiple capture ports on one Cascade Shark appliance.
  B. The maximum length the packet data can be specified.
  C. Packets can be filtered on host IP addresses.
  F. Multiple packet capture jobs can run concurrently.

• Question 17:

  When working with capture job traces on a Cascade Shark appliance from Cascade Pilot:

  A. Views should always be applied directly to the job trace.
  B. Trace clips should first be created, and views applied to them.
  C. Packets should be exported from the capture job trace before beginning analysis.
  D. The capture job trace should first be indexed by right-clicking on it and selecting "Index".
  B. Trace clips should first be created, and views applied to them.

• Question 18:

  Cascade security baselines model all host-to-host interactions. A host is identified by:

  A. AD user name if available, falling back to MAC address if available, falling back to IP address.
  B. MAC address if available, falling back to IP address if available, falling back to AD user name.
  C. AD user name if available, falling back to IP address.
  D. MAC address if available, falling back to IP address.
  D. MAC address if available, falling back to IP address.

• Question 19:

  A system administrator needs to update their Cascade Profiler host group settings to remove references to a decommissioned office on the 10.63.32.0/24 subnet.

  

  What is the best way to do this?

  A. echo "delete from hostinfo where ipaddr = '10.63.32.0/24';" | psql mazu postgres
  B. Edit the Definition and remove the entry for 10.63.32.0/24 Bracknell_UK
  C. echo "delete from hostinfo where group = 'Bracknell_UK;" | psql mazu postgres write_community_string
  D. Go to Host Groups and insert " #10.63.32.0/24 Bracknell_UK"
  B. Edit the Definition and remove the entry for 10.63.32.0/24 Bracknell_UK

• Question 20:

  Which of the following does the Cascade Sensor device provide that the Cascade Sensor-VE does not? (Select 2)

  A. Layer-7 Application Fingerprinting
  B. Connection Duration Statistics
  C. Riverbed RiOS Integration
  D. Rotating Packet Log
  A. Layer-7 Application Fingerprinting
  D. Rotating Packet Log