Riverbed 299-01 Online Practice Questions and Exam Preparation

Riverbed 299-01 Online Questions & Answers

• Question 91:

  What versions of NetFlow export the TCP flags?

  A. v5 and v9
  B. v1
  C. v7 and v8
  D. All of the above
  E. None of the above
  A. v5 and v9

• Question 92:

  Which fields are generally available for export using NetFlow technology?

  A. IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, retransmitted bits
  B. IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, inbound/outbound interface ID
  C. IP Addresses, MAC Addresses, Port Numbers, Protocol, DSCP Marking, number of bits, number of packets
  D. IP Addresses, Port Numbers, Protocol, Round Trip Time, DSCP Marking, number of bits, number of packets
  E. IP Addresses, Port Numbers, Protocol, Packet Latency, DSCP Marking, number of bits, number of packets
  B. IP Addresses, Port Numbers, Protocol, TCP Flags, DSCP Marking, number of bits, number of packets, inbound/outbound interface ID

• Question 93:

  If you have a Steelhead at a branch office, and if there is only one device you are allowed to collect flow data from, which device would be the best choice, if visibility of data before and after optimization and reporting on data reduction is important?

  A. Steelhead
  B. CE router
  C. PE router
  D. Netflow-enable hosts
  A. Steelhead

• Question 94:

  On the Cascade Shark appliance, packet de-duplication should be enabled when:

  A. Capturing packets from a SPAN-Port/Port-Mirror whose configuration may generate duplicate packets
  B. Capturing packets from an aggregating TAP
  C. Removing duplicate flows across multiple interfaces
  D. Capturing packets from a 10GB link
  A. Capturing packets from a SPAN-Port/Port-Mirror whose configuration may generate duplicate packets

• Question 95:

  What must happen prior to running WAN Optimization reports on Cascade Profiler?

  A. Host Groups must be configured.
  B. Cascade Profiler must be successfully polling Steelhead appliances via SNMP.
  C. The WAN-Steelhead interface group must be populated with WAN interfaces for all Steelhead appliances.
  D. The Profiler baseline collection must be complete.
  E. A WAN Optimization reporting template must be configured.
  C. The WAN-Steelhead interface group must be populated with WAN interfaces for all Steelhead appliances.

• Question 96:

  What report on Cascade Profiler would be used to show both sides of a conversation and the ports they communicated on?

  A. Peers
  B. Peers and Ports
  C. Host Pairs
  D. Ports
  E. Host Pairs and Ports
  E. Host Pairs and Ports

• Question 97:

  Which of the following is a valid group definition on Cascade Profiler? (Select 4)

  A. 10.0.0.0/23 United_States
  B. 0.0.0.0/0.0.0.0 Worldwide
  C. 24.32.8.43/32 CEO_Printer
  D. 192.168.0.5/255.0.255.0 Printers
  E. 10.38.14.1/255.255.255.255 My Computer
  A. 10.0.0.0/23 United_States
  B. 0.0.0.0/0.0.0.0 Worldwide
  C. 24.32.8.43/32 CEO_Printer
  D. 192.168.0.5/255.0.255.0 Printers

• Question 98:

  Live interfaces within Cascade Pilot as shown in the sources panel devices tab include:

  A. Local interfaces, Cascade Shark port interfaces, Cascade Shark aggregating port interfaces, and virtual interfaces associated with capture job traces.
  B. Local interfaces, Cascade Shark port interfaces, Cascade Shark aggregating port interfaces, and virtual interfaces associated with trace clips.
  C. Local interfaces ONLY. Cascade Shark port interfaces must be viewed from the remote menu.
  D. Interfaces associated with Cascade Shark ports ONLY. Local interfaces must be viewed from the local menu.
  A. Local interfaces, Cascade Shark port interfaces, Cascade Shark aggregating port interfaces, and virtual interfaces associated with capture job traces.

• Question 99:

  What is the maximum limit of configurable flows that can be exported from the Cascade Shark appliance? (Select 2)

  A. 200,000 flows per minute per port
  B. 300,000 flows per minute per port
  C. 500,000 flows per minute per port
  D. 500,000 flows per minute total
  E. 600,000 flows per minute total
  C. 500,000 flows per minute per port
  E. 600,000 flows per minute total

• Question 100:

  What is the relationship between a Host Group and a Host Group Type in Cascade Profiler?

  A. A Host Group Type is a container that may contain multiple Host Groups.
  B. A Host Group Type defines the name of the Host Group.
  C. They are the same thing.
  D. Each Host Group must be defined by the Type of application it serves; this is the Host Group Type.
  A. A Host Group Type is a container that may contain multiple Host Groups.