Symantec PacketShaper Administration 250-440 Questions & Answers

• Question 21:

  Which scenario would the "burstable al priority" attribute be used in?

  A. To enable a traffic class to access unused bandwidth at Priority 3 or above

  B. When a limit is specified that is less than the policy's guaranteed rate

  C. When a limit is specified that is greater than the policy's guaranteed rate

  D. To enable a traffic class to access unused bandwidth at a specified priority level

  Correct Answer: B

• Question 22:

  What does the "setup reset cleat" command enforce, that the "setup reset all* command does NOT?

  A. It dears all files on the "/public" folder, ME data, and RAD1US/IACACS* information

  B. It restores measurement data files to the measurement directory

  C. It discards the current configuration and resumes operation using the loaded configuration files

  D. It sets the appliance's management IP address to 10.10.10.1

  Correct Answer: A

• Question 23:

  Which PacketShaper feature can be applied to the Folder class?

  A. Matching rule

  B. Partition

  C. Policy

  D. Outbound/Default classification

  Correct Answer: A

• Question 24:

  A university warns to provide each student a minimum of 30 Kbps and a maximum of ISO Kbps to be used in any way. Which control mechanism does Symantec recommend to ensure this capacity?

  A. Rate Policy

  B. Burstable Partition

  C. Dynamic Subpartition

  D. Fixed Partition

  Correct Answer: B

• Question 25:

  Which CU command displays the basic configuration foe the PacketShaper?

  A. version verbose

  B. setup show

  C. classily packetshaper

  D. show setup

  Correct Answer: A

• Question 26:

  What task must an administrator perform to reset the class tree if the administrator is currently in the Sky Ul?

  A. Go to - Sky UI > Resets Page

  B. Go to - Advanced UI > Resets Page

  C. Go to - Sky UI Unit > Resets Page

  D. Go to - Advanced Ul > Unit Resets Page

  Correct Answer: B

• Question 27:

  What are the two (2) main functions o( the Symantec PacketShaper? (Select two)

  A. Control of network traffic

  B. Next generation firewall

  C. Network traffic visibility

  D. Increased bandwidth

  E. Secure transparent proxy

  Correct Answer: AC

• Question 28:

  An administrator suspects that the primary Blue Coat Authentication and Authorization Agent (BCAAA)

  server has stopped functioning. When checking the status of User Awareness on the Setup > User

  Awareness page, the status message "In use" is displayed on the page.

  What does the status "in use" mean?

  A. The server is up. PadwtShaper has connected to the server and can look up users.

  B. The server is busy. PacketShaper can't connect to It until it is freed up.

  C. You configured the wrong IP address of the BCAA server on the PackefShaper. PacketShaper c3nl connect to the server.

  D. The server is up. PacketShaper can connect to this server, but is using an alternate BCAAA server on your network.

  Correct Answer: A

• Question 29:

  What does the Packets Size retransmitted graph display?

  A. Transmuted packets against retransmitted packets, in seven size buckets

  B. Transmitted bytes against retransmitted bytes, m line chart format

  C. Packets received on the Inbound or Outbound link, in line chart formal

  D. Packets received on the Inbound or Outbound link, in seven size buckets

  Correct Answer: A

• Question 30:

  Which control limits the number of simultaneous TCP flows in a class?

  A. class licenses

  B. policy delay bound

  C. system limits

  D. policy flowlimit

  Correct Answer: B