CompTIA 220-801 Online Practice Questions and Exam Preparation

CompTIA 220-801 Online Questions & Answers

• Question 831:

  Which of the following cable types should be used for analog telephony in a fire safety zone where EMI is known to be high? (Select TWO).

  A. Plenum Single-mode Fiber
  B. Plenum Multimode Fiber
  C. Plenum CAT5e
  D. PVC CAT6
  E. PVC Multimode Fiber
  F. Plenum STP CAT3
  C. Plenum CAT5e
  F. Plenum STP CAT3

• Question 832:

  Joe, a user, cannot browse on the intranet to a particular web server by using the servername given to him by the administrator. Joe asks a coworker for the IP address of the same server, and is then able to access the webpage using the IP address. Which of the following is the MOST likely cause of the issue?

  A. DNS is not configured correctly.
  B. HTTP is not working on the server.
  C. HTTP is not working on the client.
  D. The network router is down.
  A. DNS is not configured correctly.

  ---

  Domain Name System or DNS is use to translate a name into IP address. If the DNS server is not configured correctly, it will not be able to provide translation. ReferencE. http://www.howstuffworks.com/dns.htm

• Question 833:

  Which of the following printer types uses an imaging drum?

  A. Laser
  B. Impact
  C. Inkjet
  D. Thermal
  A. Laser

  ---

  Reference. http://www.inktechnologies.com/blog/what-is-an-imaging-drum/

• Question 834:

  A technician needs to extend the wireless signal in a building. Which of the following should the technician use?

  A. Access Point
  B. Switch
  C. Hub
  D. Router
  A. Access Point

  ---

  Reference. http://en.wikipedia.org/wiki/Wireless_access_point

• Question 835:

  Which of the following represents a wiring standard for connectors of twisted pair cables?

  A. Fiber
  B. T568A
  C. IEEE1394
  D. CAT5
  B. T568A

• Question 836:

  A technician is trying to install an ExpressCard device for a user. The user's laptop is confirmed to have one spare slot for ExpressCard devices, however, the card is simply too large to fit into the labeled port. Which of the following is MOST likely the issue?

  A. The slot is for ExpressCard/34 devices.
  B. The slot is for ExpressCard/54 devices.
  C. The slot is for PCMCIA Type I devices.
  D. The slot is for PCMCIA Type II devices.
  A. The slot is for ExpressCard/34 devices.

  ---

  Reference. http://www.quepublishing.com/articles/article.aspx?p=1692559

• Question 837:

  Laser printers and thermal printers both use a heating element to function. Which of the following differentiates them?

  A. Laser printers require a liquid pigment.
  B. Thermal printers use device specific stock.
  C. Laser printers do not require thermal toner.
  D. Thermal printers utilize refillable heat toner.
  B. Thermal printers use device specific stock.

• Question 838:

  A PC cannot connect to the network. A network card was purchased without documentation or driver discs. Which of the following is the BEST way to install it into this machine?

  A. From the PC, download and install the drivers
  B. Run Windows update to install drivers
  C. Copy drivers to flash drive and install
  D. Purchase the disc online and install
  C. Copy drivers to flash drive and install

• Question 839:

  A technician needs to attach a network cable to a wall jack in the conference room. After running the cable through the conduit to the conference room, which of the following tools would BEST be used to connect the cable to the wall jack?

  A. Punchdown
  B. Loopback plug
  C. Multimeter
  D. Crimper
  A. Punchdown

• Question 840:

  After having difficulty printing, a user, Joe, informs a technician that the print server needs to be reset because there are a number of documents pending in the printer on the control panel. The technician understands that the real solution is to clear a paper jam. Which of the following is the MOST appropriate response the technician should give Joe?

  A. Inform Joe that there are print jobs piling up, but the cause is a paper jam, and a technician is fixing the issue now.
  B. Tell Joe that he was incorrect about the print server, and ask him open-ended questions to see if he has further suggestions.
  C. Thank Joe for his help with solving the issue, and let him know that a technician is in the process of resetting the print server.
  D. Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.
  D. Remove the paper jam from the printer and offer Joe some reference materials so he can be more helpful in the future.