CompTIA 220-801 Online Practice Questions and Exam Preparation

CompTIA 220-801 Online Questions & Answers

• Question 611:

  A technician replacing a CRT monitor and the battery inside of a UPS wishes to dispose of the replaced hardware. Which of the following should the technician do to BEST ensure proper disposal?

  A. Store equipment in IT inventory.
  B. Donate to a local nonprofit organization.
  C. Follow local government regulations for disposal.
  D. Affix MSDS sheet to items for the waste management company.
  C. Follow local government regulations for disposal.

• Question 612:

  Which of the following would MOST likely be found on a docking station versus a port replicator?

  A. USB Hub
  B. VGA Port
  C. PS/2 Slot
  D. DVD-ROM
  E. Security Lock
  D. DVD-ROM

  ---

  Docking stations have DVD ROM whereas Port replicator has only ports.

• Question 613:

  A technician installs three hard drives into a computer. The user would like the drives configured such that the RAID array has the best write performance and if one of the drives were to fail the user would still have a fully operational PC. Which of the following RAID types should the technician configure?

  B. 1
  C. 5
  D. 10
  C. 5

• Question 614:

  Which of the following encryption methods will support a key of up to 256-bits?

  A. WPA
  B. AES
  C. TKIP
  D. WEP
  B. AES

• Question 615:

  A customer has a shared printer on their front desk. Both the printer and computer are heavily utilized on a daily basis. The user states the computer is constantly bogged down when they print a large document and would like it fixed. The BEST solution would be to:

  A. remove the printer share from the network.
  B. attach the printer to a print server.
  C. purchase inexpensive inkjet printers for all users.
  D. move the print share to another computer.
  B. attach the printer to a print server.

• Question 616:

  Ann, a user, brings her laptop in and reports that it is no longer charging. Additionally, the laptop can no longer stay powered on even when plugged in. Which of the following hardware components is MOST likely in need of replacement?

  A. Hard drive
  B. Memory modules
  C. System fan
  D. Wireless card
  E. System board
  E. System board

• Question 617:

  A technician is troubleshooting a printer that is displaying a paper jam error message. The technician attempts to clear the jam but there is not any actual paper stuck in the printer. Which of the following is MOST likely causing this problem?

  A. Defective sensors
  B. Defective rollers
  C. Defective power adapter
  D. Defective print cartridges
  A. Defective sensors

• Question 618:

  A technician, Joe, has been told that one of the workers at his company has been using a company laptop for illicit activity. The IT manager assigned Joe the task of retrieving the laptop and bringing it back to the repair center. Which of the following has Joe performed?

  A. Maintain chain of custody
  B. Gathering evidence
  C. Device preservation
  D. Use of documentation
  B. Gathering evidence

• Question 619:

  Which of the following would be a necessary step in performing preventive maintenance on a thermal printer?

  A. Replace the print head
  B. Apply the maintenance kit
  C. Clean the heating element
  D. Replace the toner
  C. Clean the heating element

• Question 620:

  A customer has asked for the ability to operate dual digital monitors. Which of the following is the BEST solution for accomplishing this?

  A. Split the onboard video port.
  B. Update the video drivers to allow for multiple monitors.
  C. Add an adaptor to the onboard VGA port.
  D. Install a video card with multiple DVI ports.
  D. Install a video card with multiple DVI ports.

  ---

  Dual digital monitors can be easily setup by using a video card with multiple DVI ports. You can set up as many monitors as the DVI ports on the video card allow you to do so.